[Elecraft] Son of K3??

[Karl Marderian]

For me and all others (I maybe the only one). Does this imply the  
enginreers at Elcraft need to do some brushing up on designing of DSPs.
Are you saying their heterodynes aren't would they should be.
N6XVT 73

Sent from my iPhone

On May 16, 2010, at 8:45 AM, "Geoffrey Mackenzie-Kennedy" <gm4esd at btinternet.com 
 > wrote:

> If the TS-590 uses only two roofing filters and has "the best  
> receiver specs
> out there", then I speculate that it could be using an H-Mode mixer,  
> that
> the roofers exhibit better than average in-passband and skirt IIP3  
> followed
> by a decent "strong" IF, plus a LO whose phase noise is suitably low
> e.g. -145 dbc/Hz at 1 kHz offset.
>
> If they have gone down this route and if they have paid attention to
> important details such as core sizes and mix, then with the 500 Hz  
> roofer in
> line we might be seeing spurious free IMDDR3 figures of 120db at  
> spacings of
> 1kHz, and a HF noise figure of 9-10db without a preamp, based on  
> actual
> measurements made on a living "H-Mode" receiver.
>
> 73,
> Geoff
> GM4ESD
>
>
>
> From: "William Ravenel" <wmrav at triad.rr.com>
> Sent: Sunday, May 16, 2010 1:24 AM
>
>> I talked to a Kenwood rep at Dayton this morning. He said the  
>> TS-590 would
>> have the best receiver specs out there. I asked if it would beat  
>> the K3 and
>> he said the TS-590 would have the best receiver specs out there.  
>> The radio
>> has an IF of 11MHz and two stock roofing filters - 2.8KHz and 500Hz  
>> - no
>> spare slots and no options.
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html