[Elecraft] New K3 app note issued.

[Bruce Beford]

The app note for modifying the K3SYN board has been posted to the K3
Enhamcements and Application Notes page at:

http://www.elecraft.com/K3/k3_app_notes.htm

It is a simple one-resistor mod. Next time I have the rig open, I'll
probably do both of mine.

Description:
"In rare cases, at certain frequencies the DDS driving signal to the Phase
Locked Loop (PLL) may be marginal, resulting in a sudden shift in frequency
(commonly called "chirp"). This modification adds a resistor to the KSYN3
board that increases the DDS drive level prevent this condition. "

"This is an optional modification and is not required unless you are
experiencing this condition."

73,
Bruce N1RX