[Elecraft] K3 Firmware V3.99

[Alexandr Kobranov]

I can replicate this (with 3.99alpha) but only if I have VFO A in CW mode
then SUB in SSB mode.
If the same mode in A and B (main and sub) then problem is not active.
It seems to be something around mode switching...

so my few cents...

73!
Lexa, OK1DST


2010/5/31 Barry N1EU <barry.n1eu at gmail.com>

>
>
> JohnK1JD wrote:
> >
> > I really like the QSK improvement at ANY speed, but discovered a glitch
> > with ver 3.99 this morning. This occurred in split mode (QRQ CW must be
> > off to do this) with the sub RX on. The sub RX works fine until
> > transmitting, then mutes and will not come back to life until you turn it
> > off then back on. Not good, so reinstalled 3.79 just a few minutes ago
> and
> > verified that all is normal again with the Sub RX.
> >
> I'm unable to replicate this glitch with v3.99 on my K3.  If anybody else
> notices something similar, please post to the list with particulars on
> configuration.
>
> 73,
> Barry N1EU
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-Firmware-V3-99-tp5121572p5122414.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>