[Elecraft] K2 RS-232 Interface

[Phil Kane]

On 5/3/2010 9:50 AM, Jim Brown wrote:

> Nearly all radios and ham logging software use only pins 2, 3,
> and signal return for radio control and information. The K2 uses
> the other pins on its DB9 connector for other functions that are
> VERY different from the RS232 standard.

  I'm using MixW as my data and logging program with my K2/100
  and the KIO2 "special cable" for several years now.  Up to now
  I haven't been using the CAT function for frequency tracking,
  but I do want to start.  The COM port works fine for PTT rig
  control.

  Pardon me if I ask a "newbie" question, but what settings in
  the K2 menu do I have to check/change to implement this.  If
  it's documented somewhere please point me to it.

  With thanks.

--  73 de K2ASP - Phil Kane
    Elecraft K2/100   s/n 5402