[Elecraft] K2 4 MHz Osc Calibration with RWM Moscow [C1]

[Colin BUTCHER]

Good morning all. 

Not being able to receive WWV here in London, England, and not having an 
equivalent domestic service ourselves any more, I have been looking around 
for a signal against which to calibrate the 4 MHz oscillator. RWM (Moscow) 
may be suitable in that they transmit time info., on 4996, 9996 and 14996 
KHz and I can receive them hear loud and clear.

But I wish to check my logic as their signal is A1X at 1000 Hz so there is 
no carrier or voice against which to tune. Can I do the following ?

Set K2 to LSB (i.e. not CW in order to remove the CW offset)
Set SPOT (STP) tone to 1KHz
Zero beat with SPOT tone against RWM signal and then proceed with the N6KR 
method for setting the 4MHz oscillator (by setting the difference between 
the BFO and VFO to exactly 9996 with C22)

Comments gratefully received.

Many thanks

Colin
M0XED
*************************************************************************
This message and any attachments (the "message") are confidential, intended solely for the addressee(s), and may contain legally privileged information.
Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration.   
Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or
falsified.
                              ************
Ce message et toutes les pieces jointes (ci-apres le "message") sont confidentiels et susceptibles de contenir des informations couvertes 
par le secret professionnel. 
Ce message est etabli a l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisee est interdite.
Tout message electronique est susceptible d'alteration. 
La SOCIETE GENERALE et ses filiales declinent toute responsabilite au titre de ce message s'il a ete altere, deforme ou falsifie.
*************************************************************************