[Elecraft] K3 memory loss

[Brett Howard]

I remember it by thinking that the main board in the K3 is called the RF
board.  So thus the main RX is the RX on the RF board.

~Brett (N7MG) (Previously KC7OTG)

On Tue, 2010-05-25 at 18:02 +0100, Stewart wrote:
> On Tue, 25 May 2010 09:20:26 -0700, Lyle Johnson wrote:
> >
> >> While going through the Config menu's I came across
> >> RF nor KNB3 and RF nor KBPF3 entries.
> >
> >
> > It means this is the main (RF board) KNB3 or KBPF3.  If you tap 
> the SUB
> > button, and have  sub Rx installed, you'll see RF change to Sub 
> to
> > indicate the status of the option in the KRX3.
> >
> > 73,
> >
> > Lyle KK7P
> 
> Ah...
> Thanks Lyle.
> Although Sub is obvious, I don't immediately associate RF with the 
> Main RX. Main or even MN might be clearer I.M.H.O.
> 
> 73
> Stewart G3RXQ
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html