[Elecraft] K3 Firmware V3.99

[Guy Olinger K2AV]

3.99 Alpha.  Something similar.  Frequency is 7012 but don't think that matters.

Set to CW. Turn on SUB.  Double tap A>B.  SPLIT.  BSET.  MODE to SSB.
Clear BSET.   TUNE.  Clear TUNE.  Sub RX now has some very strange
audio as if went to CW filter but shift is way high.  Hitting BSET to
view SUB settings restores SSB audio.  Most likely not the way Wayne
wants it to work and the root problem causing other unwanted behavior.

This is what alpha is for....  Not a secret but usually not on
reflector.  Alpha testing is more fun because you have a better chance
of catching something.   : >)

Love the new CW+ QSK.     73, Guy.

On Mon, May 31, 2010 at 4:38 PM, John, KD8K <john at kd8k.com> wrote:
> I have the same thing occurring here with 3.99. When working split, as
> soon as I transmit, sub RX reception quits. (just a slight noise in
> background on the sub rx, like a receiver that has no antenna
> connected). This was on CW. Both the sub and the main receiver was set
> to the same mode (CW). It occurs with QRQ on or off. This was on 20m.
> 500hz filters selected on both receivers. So far, it occurs every time.
> Turning off and on the sub receiver re enables reception on the sub rx.
>