[Elecraft] K3 and an external transverter

[Don Wilhelm]

Ross,

Hopefully you have figured it out by now, but it sounds like you have 
everything correct - I don't know why you have output from the ANT1 RF 
output.  I would refer you to page 62 in the Rev D manual -- the menu 
for XVn Pwr.  Be certain you deal with the same XVn for all the steps - 
each transverter is a separate "band" for the K3.

73,
Don W3FPR

Ross wrote:
> My K3 has just come back from being repaired, somehow the main board was water damaged, now I am trying to get
> it working again with my 1296 DB6NT transverter.
>
> XV is on ,XV RF is 296, XV IF 28, XVPwr L.2, XVoffset 0 and XV Adr Trn1 , but while I have output from Ant 1on Hf, I dont have any output from the Xvtr plug on the back of the K3.
>
> So what have I missed, I need to have the HF output on 28mhz off and the 28mhz to the transverter turned on.
>
> Help please.
>
> Regards
> Ross
> ZL1WN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>