[Elecraft] K1 VFO tuning range

[Don Wilhelm]

Rafel,

As noted in the manual on page 38, two values for C2 are supplied with 
the kit, but other values can also be used.
Adjust the value of C2 to provide the range you desire and then adjust 
the turns spacing on L1 to place the OSC frequency at or slightly above 
3090 if you wish to cover the low end of the amateur bands.
Smaller values for C2 will provide a smaller tuning range.  If you want 
60 kHz, I would try 47 pF at C2 and see how close that comes.

73,
Don W3FPR


SQ5FWR wrote:
> Hi,
>
> I,ve built K1 and have over 100kHz tuning range. Can you advise me how to
> change it to have less, for example only first 60kHz portion of the band and
> get better tuning accuracy? 
>
> 73 de SQ5FWR Rafal
>
> -----
> K1 #2811
>