[Elecraft] Buryflex all the way to K3?

[Bill VanAlstyne W5WVO]

Good choice. My first (and probably last) experience with BuryFlex is that 
it should have been named SortaFlex. It's pretty stiff compared to Belden 
9913F7, which is a dream to work with in comparison. (IMHO, of course. I 
know some people don't like it.) At HF and 6m, though, ten feet of 8X will 
be perfect.

Bill W5WVO


--------------------------------------------------
From: "Jim Miller" <jim at jtmiller.com>
Sent: Sunday, May 30, 2010 1:37 PM
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Buryflex all the way to K3?

> Thanks all for the input. I'll just run 8X jumpers from my bonding panel 
> to
> the K3. The operating point is on the first floor directly above the
> basement service entrance and bonding panel with polyphasers so it will 
> only
> be 10ft.
>
> Now to order a bunch of coax and connectors.
>
> 73
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>