[Elecraft] K3 - SWR on Tx Gain Calibration

[Bill VanAlstyne W5WVO]

FWIW, my K3 does not audibly activate any relays when switching between AUTO 
and BYPASS modes on 6 meters -- but on every other band, it does, you can 
hear it. And the ATU does engage and match on 6 meters when not bypassed. 
Curious.

Bill W5WVO


--------------------------------------------------
From: "lstavenhagen" <lstavenhagen at hotmail.com>
Sent: Wednesday, May 05, 2010 9:39 AM
To: <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3 - SWR on Tx Gain Calibration

>
> For what it's worth, I definitely can't replicate this on my K3. The ATU 
> is
> definitely is bypassed when I select bypass on 10M (in both ANT sockets).
> Do you hear the relay clicking when you switch back and forth between 
> bypass
> and inline?
>
> 73,
> LS
> W5QD
> -- 
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/K3-SWR-on-Tx-Gain-Calibration-tp5008783p5009531.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>