December 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Dec 1 00:28:07 EST 2012
Ending: Mon Dec 31 22:54:30 EST 2012
Messages: 1539

• [Elecraft] missed market   Robert Vargas (KP4Y)
• [Elecraft] KX3 guestion   Robert Vargas (KP4Y)
• [Elecraft] KX3 guestion   Robert Vargas (KP4Y)
• [Elecraft] KX3 guestion   Robert Vargas (KP4Y)
• [Elecraft] KXPA100   Robert Vargas (KP4Y)
• [Elecraft] [KX3]2M Module   Robert Vargas (KP4Y)
• [Elecraft] Easy Way to Watch Posts   Peter Eijlander (PA0PJE)
• [Elecraft] Poor AM audio (KX3)   Peter Eijlander (PA0PJE)
• [Elecraft] K3 overvoltage protection   Poul Erik Karlshøj (PKA)
• [Elecraft] Problem with a K3 screw - suggestions needed   Doug Faunt N6TQS +1-510-717-1197
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [Elecraft] K3 Out of Warranty Repairs   Jester Court 104
• [Elecraft] K3 PSK split?   cx7tt at 4email.net
• [Elecraft] P3 Has empty connector hole!   k7hbg at dslextreme.com
• [Elecraft] K3 SWR & S meter not functioning   Chuck Shefflette - AA3CS
• [Elecraft] [dxlab] KPA500 CAT commands   Dave AA6YQ
• [Elecraft] KAT500 to K3 and KPA500 Cabling   AE4CW
• [Elecraft] K3 Key jack   Craig - AE6RR
• [Elecraft] New Output Power Issue   AG0N-3055
• [Elecraft] Problem with a K3 screw   AG0N-3055
• [Elecraft] Wall wart for KX3   Christian AK4VV
• [Elecraft] Wall wart for KX3   Christian AK4VV
• [Elecraft] K3: FSK, AFSK, CW   Michael Adams
• [Elecraft] New Yahoo Group Formed   Tommy Alderman
• [Elecraft] For Sale: K2/100 + Options   Ken Alexander
• [Elecraft] HRD ver 6 beta   Lawrence Allison
• [Elecraft] Price guesstimate on KXPA100   Geoff Allsup
• [Elecraft] [P3] VFO B tracking mode feature?   Brian Alsop
• [Elecraft] K3 V4.61 CW decode broken?   Brian Alsop
• [Elecraft] KAT500 Tuning issue   Brian Alsop
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500(Video)   Brian Alsop
• [Elecraft] K3 and band data future?   Brian Alsop
• [Elecraft] new KPA 500 question   Brian Alsop
• [Elecraft] New Output Power Issue   Brian Alsop
• [Elecraft] OT - PSK signal strengths   Brian Alsop
• [Elecraft] KX3 guestion   Adi Andrei
• [Elecraft] FS: P3 SVGA Card for sale in UK   PAUL BRADBEER
• [Elecraft] FS: P3 SVGA card - Sold   PAUL BRADBEER
• [Elecraft] KX1 KXPD1 tips?   Heinz Baertschi
• [Elecraft] K2 is sick?   Mike Baird
• [Elecraft] Are you satisfied with your K3?   Nate Bargmann
• [Elecraft] Thanks to all   Nate Bargmann
• [Elecraft] I've been thinking!   Nate Bargmann
• [Elecraft] [K3] 4.60 - can't set agc on sub receiver separate from main receiver   Dave J. Barnes
• [Elecraft] Still More P3 Details   Barry
• [Elecraft] OT: IDIOM PRESS   Barry
• [Elecraft] Problem with a K3 screw - suggestions needed   Barry
• [Elecraft] Long Messages   Barry
• [Elecraft] Long Messages   Barry
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Rick Bates
• [Elecraft] K3 memory editor programming 2m repeaters   Rick Bates
• [Elecraft] K3 / SLUSB / CocoaModem   Rick Bates
• [Elecraft] K3 KPA500 clearance under shelf   Rick Bates
• [Elecraft] K3: FSK, AFSK, CW   Rick Bates
• [Elecraft] K3 HRD Ver 6   Rick Bates
• [Elecraft] Ham Radio Deluxe works great with my KX3!   Rick Bates
• [Elecraft] KAT500 Tuning issue   Mark Bayern
• [Elecraft] missed market   Mark Bayern
• [Elecraft] auto tuners   Mark Bayern
• [Elecraft] K1 RF Board Trimmer Caps   Bruce Beford
• [Elecraft] IMPORTANT CORRECTION: K1 RF Board Trimmer Caps   Bruce Beford
• [Elecraft] New Output Power Issue   Bruce Beford
• [Elecraft] KX-3 and KPA-500?   Bruce Beford
• [Elecraft] KX3 Schematic.   Bruce Beford
• [Elecraft] [K2] For Sale: K2/100 Loaded with Options   Darrell Bellerive
• [Elecraft] [K2] For Sale: K2/100 Loaded with Options - Price Reduced!   Darrell Bellerive
• [Elecraft] [K2] FS: EA3BLQ K2DI & K2DI-PCI Unbuilt Kits - Price Reduced!   Darrell Bellerive
• [Elecraft] [K2] For Sale: K2/100 Loaded with Options - Price Reduced!   Darrell Bellerive
• [Elecraft] K3 / SLUSB / CocoaModem   Jim Bennett
• [Elecraft] K3 / SLUSB / CocoaModem   Jim Bennett
• [Elecraft] K3 / SLUSB / CocoaModem   Jim Bennett
• [Elecraft] K3 / SLUSB / CocoaModem   Jim Bennett
• [Elecraft] USB Cable Power Requirements   Jim Bennett
• [Elecraft] K3: "SPKR+PH" - not sticky   Jack Berry
• [Elecraft] K3: "SPKR+PH" - not sticky   Jack Berry
• [Elecraft] New Output Power Issue   Jack Berry
• [Elecraft] New Output Power Issue   Jack Berry
• [Elecraft] New Output Power Issue   Jack Berry
• [Elecraft] New Output Power Issue   Jack Berry
• [Elecraft] New Output Power Issue   Jack Berry
• [Elecraft] [K3] Another K3 (SN 7071) on the air!   Jack Berry
• [Elecraft] K3 key clicks   Bill
• [Elecraft] Elecraft and Mac OS X   Joel Black
• [Elecraft] Elecraft and Mac OS X   Joel Black
• [Elecraft] [P3] Utility on a Mac   Joel Black
• [Elecraft] [P3] Utility on a Mac - Solved   Joel Black
• [Elecraft] USB Cable Power Requirements   Joel Black
• [Elecraft] New P3   Alan Bloom
• [Elecraft] ESD Protection for K3 Assembly   Alan Bloom
• [Elecraft] N-gen question   Alan Bloom
• [Elecraft] K2 for sale   Jeffrey Blumenfeld
• [Elecraft] Fwd: KX3 Micro Manual Available in Apple App Store from Elecraft Digest, Vol 103, Issue 32   Jeffrey Blumenfeld
• [Elecraft] I've been thinking!   Bob
• [Elecraft] K3 & SDR-IQ from re-space   KD7YZ Bob
• [Elecraft] Settings for CW filter 400hz   KD7YZ Bob
• [Elecraft] Settings for CW filter 400hz   KD7YZ Bob
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   KD7YZ Bob
• [Elecraft] Settings for CW filter 400hz   KD7YZ Bob
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   KD7YZ Bob
• [Elecraft] Put my new KAT500 thru the wringers today   KD7YZ Bob
• [Elecraft] K3 + SDR-IQ and regular CW operation   KD7YZ Bob
• [Elecraft] K3 + SDR-IQ and regular CW operation   KD7YZ Bob
• [Elecraft] K3 KAT500 'Err AT3'   KD7YZ Bob
• [Elecraft] K3 with SDR-IQ and external antenna for SDR-IQ?   KD7YZ Bob
• [Elecraft] K3 with SDR-IQ and external antenna for SDR-IQ?   KD7YZ Bob
• [Elecraft] K3 KAT500 'Err AT3' recurring   KD7YZ Bob
• [Elecraft] KAT500 doesn't retain freq setting?   KD7YZ Bob
• [Elecraft] K3 Freezes turned on with no pwr to XVnnn   KD7YZ Bob
• [Elecraft] KAT500 question   KD7YZ Bob
• [Elecraft] KAT500 question   KD7YZ Bob
• [Elecraft] KAT500 question   KD7YZ Bob
• [Elecraft] [KX3]2M Module   KD7YZ Bob
• [Elecraft] K3 + Icon   Dale Boresz
• [Elecraft] KX3 and Edirol FA-66 ?   Dale Boresz
• [Elecraft] Poor AM audio   Dale Boresz
• [Elecraft] K1 Loose Control Knobs   Christopher Bowne
• [Elecraft] k3 and HRD   David Boyd
• [Elecraft] K3 and HRD   David Boyd
• [Elecraft] missed market   Buddy Brannan
• [Elecraft] Seeking K3 with tuner to purchase   Tom Branton
• [Elecraft] KAT500 kits who has received it?   Brian Maynard, K1NW
• [Elecraft] K3 Clock loses time   Brian Maynard, K1NW
• [Elecraft] K3 Clock loses time   Brian Maynard, K1NW
• [Elecraft] [KPA500] latest upgrade   Jack Brindle
• [Elecraft] KPA500 PWR Display   Jack Brindle
• [Elecraft] KPA500 PWR Display   Jack Brindle
• [Elecraft] KPA500 PWR Display   Jack Brindle
• [Elecraft] [P3] Utility on a Mac   Jack Brindle
• [Elecraft] KRC2 Manual configuration?   Jack Brindle
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   Jack Brindle
• [Elecraft] K3/0 to K3/100 twin issue at K6LRG   Jim Brown
• [Elecraft] KAT500 a good tuner or great tuner   Jim Brown
• [Elecraft] KAT500 a good tuner or great tuner   Jim Brown
• [Elecraft] KAT500 a good tuner or great tuner   Jim Brown
• [Elecraft] KAT500 a good tuner or great tuner   Jim Brown
• [Elecraft] CW/Data Display full time   Phil Brown
• [Elecraft] Poor AM Audio   Phil Brown
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   Ted Bryant
• [Elecraft] K144XV vs XV144   John Buck
• [Elecraft] Kat500-K   Eric Buggee
• [Elecraft] Fwd: Kat500-K. Invoice 94634 refers.   Eric Buggee
• [Elecraft] Thank You Elecraft Employees   Wayne Burdick
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Wayne Burdick
• [Elecraft] K2 - How low (in voltage) can it go?   Wayne Burdick
• [Elecraft] Need quick test of new KX3 firmware that greatly improves SSB carrier suppression   Wayne Burdick
• [Elecraft] Found this on Facebook this morning... KPA800??   Wayne Burdick
• [Elecraft] Are you satisfied with your K3?   Wayne Burdick
• [Elecraft] K3 V4.61 CW decode broken?   Wayne Burdick
• [Elecraft] Big weakness in Macro's   Wayne Burdick
• [Elecraft] KAT 500 dissatisfaction [irony alert!]   Wayne Burdick
• [Elecraft] KX3 reverse polarity power   Wayne Burdick
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   Wayne Burdick
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   Wayne Burdick
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   Wayne Burdick
• [Elecraft] KX3 guestion   Wayne Burdick
• [Elecraft] KX3 config menu question   Wayne Burdick
• [Elecraft] KX3 CW   Wayne Burdick
• [Elecraft] KX3 VFO tuning noise...an observation...   Wayne Burdick
• [Elecraft] KX3 Digital Voice Recorder (DVR) ready for test -- need a few volunteers   Wayne Burdick
• [Elecraft] K3 and HRD   Wayne Burdick
• [Elecraft] KAT500 LC settings recall -- complete explanation (including auxBus tradeoffs)   Wayne Burdick
• [Elecraft] KAT500 LC settings recall -- complete explanation (including auxBus tradeoffs)   Wayne Burdick
• [Elecraft] Price guesstimate on KXPA100   Wayne Burdick
• [Elecraft] [KX3]2M Module   Wayne Burdick
• [Elecraft] [KX3]2M Module   Wayne Burdick
• [Elecraft] KX3 Digital Voice Recorder (DVR) ready for test -- need a few volunteers   Wayne Burdick
• [Elecraft] Wanted: A few more testers for the KX3's new DVR feature   Wayne Burdick
• [Elecraft] KX3 and Begali Adventure   Donald Butler
• [Elecraft] KPA500 output on 6 meters   WILLIS COOKE
• [Elecraft] Power pole connection comes loose   Pierfrancesco Caci
• [Elecraft] Big weakness in Macro's   Pierfrancesco Caci
• [Elecraft] [K3] K144XV adjacent channel rejection in FM   Pierfrancesco Caci
• [Elecraft] I've been thinking!   Ray Cadmus
• [Elecraft] Keying the K3 for RTTY   Cady, Fred
• [Elecraft] K3 Firmware upload elapsed time   Cady, Fred
• [Elecraft] KE7X K3 Book -- Second Edition   Cady, Fred
• [Elecraft] Checking U1 for communication with the K3   Cady, Fred
• [Elecraft] [KAT500]Schematics?   Cady, Fred
• [Elecraft] K3 Macros in memory   Cady, Fred
• [Elecraft] Clock loses time   Cal
• [Elecraft] Wonder if anybody has an EC2 (blank K2 enclosure)?   TJ Campie
• [Elecraft] 10 Watt DX   Tony Castellano
• [Elecraft] Problem with a K3 screw - suggestions needed   Ken Chandler
• [Elecraft] new KPA 500 question   Tom H Childers
• [Elecraft] KAT500 a good tuner or great tuner   Tom H Childers
• [Elecraft] KAT500 question   Tom H Childers
• [Elecraft] Problem with a K3 screw - suggestions needed   Tom H Childers
• [Elecraft] [K3] DX4WIN K3 settings   David Christ
• [Elecraft] K2 - Cost estimate for repairs   Ron D'Eau Claire
• [Elecraft] Power pole connection comes loose   Ron D'Eau Claire
• [Elecraft] OT: definition of semi-breakin   Ron D'Eau Claire
• [Elecraft] My first contact using my KX3 and Buddipole combination   Ron D'Eau Claire
• [Elecraft] ESD Protection for K3 Assembly   Ron D'Eau Claire
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Ron D'Eau Claire
• [Elecraft] KAT500 and SWR   Ron D'Eau Claire
• [Elecraft] Fwd: KX3's KXBC3 NiMH Battery Charger & RT Clock!   Ron D'Eau Claire
• [Elecraft] Are you satisfied with your K3?   Ron D'Eau Claire
• [Elecraft] KPA500 - SWR into K3   Ron D'Eau Claire
• [Elecraft] KAT500 Tuning issue   Ron D'Eau Claire
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Ron D'Eau Claire
• [Elecraft] KPA500 - SWR into K3   Ron D'Eau Claire
• [Elecraft] Help,advise K3/KPA500 problem   Ron D'Eau Claire
• [Elecraft] In person, just as email...   Ron D'Eau Claire
• [Elecraft] Put my new KAT500 thru the wringers today   Ron D'Eau Claire
• [Elecraft] Serial Daisy Chain   Ron D'Eau Claire
• [Elecraft] No ON/OFF Switch on KAT500   Ron D'Eau Claire
• [Elecraft] Vibroplex   Ron D'Eau Claire
• [Elecraft] Vibroplex   Ron D'Eau Claire
• [Elecraft] auto tuners   Ron D'Eau Claire
• [Elecraft] auto tuners   Ron D'Eau Claire
• [Elecraft] missed market   Ron D'Eau Claire
• [Elecraft] KX3 guestion   Ron D'Eau Claire
• [Elecraft] New Output Power Issue   Ron D'Eau Claire
• [Elecraft] New Output Power Issue   Ron D'Eau Claire
• [Elecraft] K3 assembly questiion   Ron D'Eau Claire
• [Elecraft] K3/KPA500/KAT500 Help   Ron D'Eau Claire
• [Elecraft] New Output Power Issue   Ron D'Eau Claire
• [Elecraft] KAT500 question   Ron D'Eau Claire
• [Elecraft] KAT500 question   Ron D'Eau Claire
• [Elecraft] New Output Power Issue   Ron D'Eau Claire
• [Elecraft] Problem with a K3 screw - suggestions needed   Ron D'Eau Claire
• [Elecraft] Problem with a K3 screw   Ron D'Eau Claire
• [Elecraft] Problem with a K3 screw   Ron D'Eau Claire
• [Elecraft] Problem with a K3 screw   Ron D'Eau Claire
• [Elecraft] Poor AM audio   Ron D'Eau Claire
• [Elecraft] k-3 2 meter   Ron D'Eau Claire
• [Elecraft] K3/100 into DX-CC antenna (HI-SWR)   Ron D'Eau Claire
• [Elecraft] Are you satisfied with your K3?   Bill Clarke
• [Elecraft] K3 - amp and tuner question   Bill Clarke
• [Elecraft] [K3] autonotch now distorts SSB audio   Bill Clarke
• [Elecraft] K3 VFO tuning noise   Bill Clarke
• [Elecraft] K3 and HRD V6.0 beta   Bill Clarke
• [Elecraft] K3 HRD Ver 6   Bill Clarke
• [Elecraft] K3 HRD Ver 6   Bill Clarke
• [Elecraft] Problem Firmware and K3   Bill Clarke
• [Elecraft] Problem Firmware and K3   Bill Clarke
• [Elecraft] [K3] Re: Bad AM Audio in RX   Bill Clarke
• [Elecraft] [P3] VFO B tracking mode feature?   Carl Clawson
• [Elecraft] [K3] SO2V?   Carl Clawson
• [Elecraft] Entire K3 Collection sale   Joel Cohen
• [Elecraft] K3 VLF transverter?   Edward R Cole
• [Elecraft] K3 VLF transverter?   Edward R Cole
• [Elecraft] OT: definition of semi-breakin   Edward R Cole
• [Elecraft] AO-7 operation with K3?   Edward R Cole
• [Elecraft] K144XV vs XV144   Edward R Cole
• [Elecraft] K144XV vs XV144   Edward R Cole
• [Elecraft] K3 with SDR-IQ and external antenna for SDR-IQ?   Edward R Cole
• [Elecraft] K3 VFO tuning noise   Edward R Cole
• [Elecraft] KX3 VFO tuning noise...an observation...   Edward R Cole
• [Elecraft] I've been thinking!   Edward R Cole
• [Elecraft] [KX3]2M Module   Edward R Cole
• [Elecraft] [K3] Another K3 (SN 7071) on the air!   Bill Coleman
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Bill Coleman
• [Elecraft] KPA 100 L16 and RFC1   Ray Collins
• [Elecraft] Tune and CW power levels in version 4.60   Jack Colson
• [Elecraft] Tune and CW power levels in version 4.60   Jack Colson
• [Elecraft] K3 Clock Losses Time...Solution?   David and Dianne on Comcast
• [Elecraft] Are you satisfied with your K3?   Bayard Coolidge
• [Elecraft] KXBC Clock   Bayard Coolidge
• [Elecraft] Problem with a K3 screw   Bayard Coolidge
• [Elecraft] USB Cable Power Requirements   Bayard Coolidge
• [Elecraft] kx3 macbook air programs   Bayard Coolidge
• [Elecraft] Cheap and Easy SDR   Kevin Cozens
• [Elecraft] New Yahoo Group Formed   Bert Craig
• [Elecraft] Wall wart for KX3   Bert Craig
• [Elecraft] K? for remote rx only   David Cutter
• [Elecraft] K? for remote rx only   David Cutter
• [Elecraft] KAT500 on top of the KAP500   DGB
• [Elecraft] KAT500 kits who has received it?   DGB
• [Elecraft] KAT500 Kit Arrives   DGB
• [Elecraft] KPA500 presents high SWR to radio driving it   RANDY DIDDEL
• [Elecraft] KX3 will it work as K3/0   Mitch Wolfson DJØQN
• [Elecraft] I've been thinking!   Mitch Wolfson DJØQN
• [Elecraft] Elecraft and Mac OS X   Karl DK5LP
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   DR
• [Elecraft] K3 and HRD V6.0 beta   VE3GNO Daniel
• [Elecraft] [KAT500] Remote location photos   VE3GNO Daniel
• [Elecraft] Problem Firmware and K3   George Danner
• [Elecraft] (no subject)   Irwin Darack
• [Elecraft] WTT amp(s) for K3 or?   AB2E Darrell
• [Elecraft] Cannot download driver for KUSB   Dave Perry, N4QS
• [Elecraft] Cannot download driver for KUSB   Dave Perry, N4QS
• [Elecraft] XV144 - does it power spike   David Ferrington, M0XDF
• [Elecraft] XV144 - does it power spike   David Ferrington, M0XDF
• [Elecraft] XV144 - does it power spike   David Ferrington, M0XDF
• [Elecraft] microphone issue on K3   David Ferrington, M0XDF
• [Elecraft] W2 Interface Question   David Ferrington, M0XDF
• [Elecraft] In person, just as email...   Buzz Dean
• [Elecraft] In person, just as email, etc   Buzz Dean
• [Elecraft] Elecraft Net on 14.3035   Peter Dent
• [Elecraft] KAT500 to K3 and KPA500 Cabling   Peter Dent
• [Elecraft] kx3 with amp's   Vincent Diak
• [Elecraft] KPA500 PWR Display   Dick Diddams
• [Elecraft] K3 rig control/CW serial interface   Dick Dievendorff
• [Elecraft] K3 Firmware upload elapsed time   Dick Dievendorff
• [Elecraft] K3 Firmware upload elapsed time   Dick Dievendorff
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   Dick Dievendorff
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Dick Dievendorff
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Dick Dievendorff
• [Elecraft] KPA500 - SWR into K3   Dick Dievendorff
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   Dick Dievendorff
• [Elecraft] KPA/KAT 500 Firmware 1.18   Dick Dievendorff
• [Elecraft] No ON/OFF Switch on KAT500   Dick Dievendorff
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Dick Dievendorff
• [Elecraft] KAT500 a good tuner or great tuner   Dick Dievendorff
• [Elecraft] Problem Firmware and K3   Dick Dievendorff
• [Elecraft] KAT500 LC settings recall -- complete explanation   Dick Dievendorff
• [Elecraft] Cannot download driver for KUSB   Dick Dievendorff
• [Elecraft] Small power supply ??   Dick Dievendorff
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   Dick Dievendorff
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   Dick Dievendorff
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   Dick Dievendorff
• [Elecraft] K3 Macros in memory   Jan Ditzian
• [Elecraft] K3 Macros in memory   Jan Ditzian
• [Elecraft] Are you satisfied with your K3?   Dr. William J. Schmidt, II
• [Elecraft] missed market   Dr. William J. Schmidt, II
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   Dr. William J. Schmidt, II
• [Elecraft] K3 won't shut off?   Dr. William J. Schmidt, II
• [Elecraft] K3 won't shut off?   Dr. William J. Schmidt, II
• [Elecraft] Hey   Jeff Drew
• [Elecraft] Long Messages   David Dunn
• [Elecraft] Cady book   Paul M Dunphy
• [Elecraft] K3 line out - Stereo vs Mono   Paul M Dunphy
• [Elecraft] K3 line out - Stereo vs Mono   Paul M Dunphy
• [Elecraft] VOX question   Paul M Dunphy
• [Elecraft] VOX question - Found it   Paul M Dunphy
• [Elecraft] OT: IDIOM PRESS   Dyarnes
• [Elecraft] Are you satisfied with your K3?   Dyarnes
• [Elecraft] Selling my K2.   Dyarnes
• [Elecraft] KAT500 remote operation   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KAT500 kits who has received it?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] New Yahoo Group Formed   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] [KAT500] Tuning   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K3 key clicks   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] K3 key clicks   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Why are my messages being cut off at the subject line?   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Selling my K2.   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] missed market   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] [KX3]2M Module   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] Long Messages   Eric Swartz WA6HHQ - Elecraft
• [Elecraft] KX3 offset with transverter   WW2R Elecraft
• [Elecraft] K3 VFO tuning noise on 10m & RF gain   Jussi Eloranta
• [Elecraft] K3 VFO tuning noise   Jussi Eloranta
• [Elecraft] OT: IDIOM PRESS (THREAD CLOSED)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Serial Daisy Chain   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] new KPA 500 question   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] KXPA100   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 near salt water   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Elecraft email List Official Guidelines 2012-2013   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Top Posting is the official standard for the Elecraft List   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] How to avoid Elecraft list email overload: Nabble and other web archives   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] Problem with a K3 screw - suggestions needed   Tony Estep
• [Elecraft] K3 stereo volume balance   F5vjc
• [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.   Christophe F8ACF-56
• [Elecraft] FS: K3 Filters   Ray Fallen
• [Elecraft] FS K3 Filters   Ray Fallen
• [Elecraft] K3 near salt water   Robert Fanfant
• [Elecraft] KAT500 Kit Builders   Richard Ferch
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   Richard Ferch
• [Elecraft] [KAT500] Cabling Diagram   Richard Ferch
• [Elecraft] KAT500 to K3 and KPA500 Cabling   Richard Ferch
• [Elecraft] [K3] SO2V?   Richard Ferch
• [Elecraft] K2 - Cost estimate for repairs   Josh Fiden
• [Elecraft] (K3) Assembly (again) Front head   Josh Fiden
• [Elecraft] (K3) Assembly (again) Front head   Josh Fiden
• [Elecraft] New Output Power Issue, and a new question   Richard Fjeld
• [Elecraft] K3, A calibration question   Richard Fjeld
• [Elecraft] K3, A calibration question   Richard Fjeld
• [Elecraft] New Output Power Issue, and a new question   Richard Fjeld
• [Elecraft] New Output Power Issue, and a new question   Richard Fjeld
• [Elecraft] New Output Power Issue, and a new question   Richard Fjeld
• [Elecraft] K3; VM calibration and Voltage drops resolved   Richard Fjeld
• [Elecraft] Clock loses time   Richard Fjeld
• [Elecraft] [KAT500] Please help with Mac-KAT500 interface   David Fleming
• [Elecraft] K3 Abberation   Mike Flowers
• [Elecraft] K3 and HRD   Mike Flowers
• [Elecraft] I've been thinking!   Mark Forsyth
• [Elecraft] Elecraft and Mac OS X   Bill Frantz
• [Elecraft] K3 / SLUSB / CocoaModem   Bill Frantz
• [Elecraft] K3 Filters (again???!!)   Bill Frantz
• [Elecraft] Wall wart for KX3   Bill Frantz
• [Elecraft] I've been thinking!   Bill Frantz
• [Elecraft] K3 Clock loses time   Bill Frantz
• [Elecraft] OT - PSK signal strengths   Bill Frantz
• [Elecraft] USB Cable Power Requirements   Bill Frantz
• [Elecraft] KAT500/F Missing thermal pad on R5   Robert Friess
• [Elecraft] KPA500 output on 6 meters   Robert Friess
• [Elecraft] W2 Wattmeter accuracy at low power   Robert Friess
• [Elecraft] N-gen question   Robert Friess
• [Elecraft] N-gen question   Robert Friess
• [Elecraft] Selling my K2.   Gil G.
• [Elecraft] Selling my K2.   Gil G.
• [Elecraft] Poor AM audio   Gil G.
• [Elecraft] K2 For Sale   David G4DMP
• [Elecraft] K144XV vs XV144   David G4DMP
• [Elecraft] XV144 - does it power spike   David G4DMP
• [Elecraft] K3 overvoltage protection   G4HUE
• [Elecraft] K3 overvoltage protection   G4HUE
• [Elecraft] iSDR app and KX3 not working   GDR
• [Elecraft] [KPA500] latest upgrade   GDanner
• [Elecraft] [KPA500] latest upgrade   GDanner
• [Elecraft] I've been thinking!   GDanner
• [Elecraft] Thanks   GDanner
• [Elecraft] Problem with a K3 screw - suggestions needed   Ian White GM3SEK
• [Elecraft] P3 -- Span slow to update   T Gahagan
• [Elecraft] Fwd: iSDR app and KX3 not working   Nick Garner
• [Elecraft] Surface Mount IC Repairs was Re: K3 Serial Port Fixed!   Gary
• [Elecraft] Help!   Stan Gibbs
• [Elecraft] K3 Front End Protection   Stan Gibbs
• [Elecraft] K3 Front End Protection   Stan Gibbs
• [Elecraft] OT: IDIOM PRESS   David Gilbert
• [Elecraft] New Yahoo Group Formed   David Gilbert
• [Elecraft] OT: "Tin whiskers"   David Gilbert
• [Elecraft] new KPA 500 question   David Gilbert
• [Elecraft] I've been thinking!   David Gilbert
• [Elecraft] I've been thinking!   David Gilbert
• [Elecraft] K2 - Cost estimate for repairs   Richard Gillingham
• [Elecraft] Found this on Facebook this morning... KPA800??   Richard Gillingham
• [Elecraft] Fwd: KX3 Micro Manual Available in Apple App Store from Elecraft Digest, Vol 103, Issue 32   Richard Gillingham
• [Elecraft] posting directions   Mike Goldstein
• [Elecraft] directions   Mike Goldstein
• [Elecraft] [K3][K2][KX3] SMPS without noise.   Eduardo González
• [Elecraft] Elecraft Digest, Vol 104, Issue 52   Bruce Graham
• [Elecraft] FW: VK4KO: Re: K312MDKT   Alan Grant
• [Elecraft] VK4KO: Re: K312MDKT   Alan Grant
• [Elecraft] K312MDKT   Alan Grant
• [Elecraft] Big weakness in Macro's   W0SD Ed Gray
• [Elecraft] Big weakness in Macro's   W0SD Ed Gray
• [Elecraft] Elecraft and Mac OS X   Greg
• [Elecraft] K3 / SLUSB / CocoaModem   Greg
• [Elecraft] K3 key clicks   Greg
• [Elecraft] [KAT500] Cabling Diagram   Gary Gregory
• [Elecraft] KPA500 - SWR into K3   Gary Gregory
• [Elecraft] KAT500 to K3 and KPA500 Cabling   Gary Gregory
• [Elecraft] KAT500 to K3 and KPA500 Cabling   Gary Gregory
• [Elecraft] K3 memory editor programming 2m repeaters   Gary Gregory
• [Elecraft] missed market   Gary Gregory
• [Elecraft] [KPA500] latest upgrade   Gary Gregory
• [Elecraft] [KPA500] that's what I was running, definitely causes the problem   Gary Gregory
• [Elecraft] I've been thinking!   Gary Gregory
• [Elecraft] KAT500 a good tuner or great tuner   Gary Gregory
• [Elecraft] KAT500 a good tuner or great tuner   Gary Gregory
• [Elecraft] KAT500 a good tuner or great tuner   Gary Gregory
• [Elecraft] [K3] Re: Problem with firmware and K3   Gary Gregory
• [Elecraft] [KX3] CW anytime   Gary Gregory
• [Elecraft] [KAT500] Remote location photos   Gary Gregory
• [Elecraft] SOLUTION: SSB RF problems on 20 Meters Only   Ron Gruner
• [Elecraft] (K3) 10 Watt DX   David Guernsey
• [Elecraft] K3 Abberation   Paul Gussow
• [Elecraft] K3 Filters (again???!!)   PETER HUTCHISON
• [Elecraft] K3 Filters (again???!!) - Many Thanks   PETER HUTCHISON
• [Elecraft] WTB - P3 SVGA Board   Dave Hachadorian
• [Elecraft] KX3 on 27 MHz   Tim Hague
• [Elecraft] Re KPA500   Tim Hague
• [Elecraft] New Output Power Issue   Tim Hague
• [Elecraft] New User   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] New Output Power Issue   Ian Kahn - Ham
• [Elecraft] My first contact using my KX3 and Buddipole combination   Bill Hammond
• [Elecraft] Link to photos of KAT500 build   Bill Hammond
• [Elecraft] Vibroplex   Bill Hammond
• [Elecraft] KPA500 faults on first dit at times   Bill Hammond
• [Elecraft] W2 Interface Question   Bill Hammond
• [Elecraft] W2 Interface Question   Bill Hammond
• [Elecraft] KX-3 and KPA-500?   Augie Hansen
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Augie "Gus" Hansen
• [Elecraft] Wall wart for KX3   Bill Harris
• [Elecraft] PS for KX3   Bill Harris
• [Elecraft] Help!   Jim Harris
• [Elecraft] Help!   Jim Harris
• [Elecraft] Fwd: KX3's KXBC3 NiMH Battery Charger & RT Clock!   Jim Harris
• [Elecraft] KX3 FW Rev. 1.3!   Jim Harris
• [Elecraft] kx3 aUTO-oN!   Jim Harris
• [Elecraft] KX3!   Jim Harris
• [Elecraft] KUSB Noise Query - K3   Mike Harris
• [Elecraft] Problem Firmware and K3   Mike Harris
• [Elecraft] K3 near salt water   Mike Harris
• [Elecraft] KX3 Digital Voice Recorder (DVR) ready for test -- need a few volunteers   Alan Hawrylyshen
• [Elecraft] Are you satisfied with your K3?   Keith Heimbold
• [Elecraft] K3 V4.61 CW decode broken?   Keith Heimbold
• [Elecraft] K3 memory editor programming 2m repeaters   Keith Heimbold
• [Elecraft] K3 memory editor programming 2m repeaters   Keith Heimbold
• [Elecraft] Selling my K2.   Keith Heimbold
• [Elecraft] DX SPOTS IPAD   Keith Heimbold
• [Elecraft] K3 HRD Ver 6   Keith Heimbold
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   Keith Heimbold
• [Elecraft] [K3] Subreceiver question - new small beverage antenna   Keith Heimbold
• [Elecraft] AO-7 operation with K3?   William Hein
• [Elecraft] K3 key clicks   William Hein
• [Elecraft] KXBC3 "observations"   Rich Heineck
• [Elecraft] iSDR app and KX3 not working   Mike Heitmann
• [Elecraft] KXPA100   Daniel Helmer
• [Elecraft] PL-2303 USB-Serial Drivers   Chris Hembree
• [Elecraft] [KX3]2M Module   Ronald Herman
• [Elecraft] [K3] Button Beeps   Ronald Herman
• [Elecraft] KX3 auto power off.   Jeff Herr
• [Elecraft] Clock loses time   Jeff Herr
• [Elecraft] K2 Memory and 60 meters management   Mike Herr
• [Elecraft] KRC2 Manual configuration?   Joe Hetrick
• [Elecraft] missed market   W2RU - Bud Hippisley
• [Elecraft] KAT500 LC settings recall -- complete explanation   Brett Howard
• [Elecraft] [K3] Custom 700 Hz 8-Pole Filter Availability   Gary W. Hvizdak
• [Elecraft] [K2] Rework Eliminator(TM) Option Bypass Headers Kit Availability   Gary W. Hvizdak
• [Elecraft] K3 KPA500 clearance under shelf   Gary W. Hvizdak
• [Elecraft] Thump through speakers when switching on and mute probs with headset.   Clifford Hynds
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Clifford Hynds
• [Elecraft] KAT500/F Missing thermal pad on R5   Phil Hystad
• [Elecraft] KAT500 Kit Builders   Phil Hystad
• [Elecraft] KAT500 and SWR   Phil Hystad
• [Elecraft] KAT500 and SWR   Phil Hystad
• [Elecraft] Are you satisfied with your K3?   Phil Hystad
• [Elecraft] No ON/OFF Switch on KAT500   Phil Hystad
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Phil Hystad
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Phil Hystad
• [Elecraft] K-Line Faultless Operation ?   Phil Hystad
• [Elecraft] KX3 guestion   Phil Hystad
• [Elecraft] KX3 guestion   Phil Hystad
• [Elecraft] K3 VFO tuning noise   Phil Hystad
• [Elecraft] new KPA 500 question   Phil Hystad
• [Elecraft] [KAT500 and OT] Is a tuner using VNA feasible ?   Phil Hystad
• [Elecraft] K3 Clock loses time   Phil Hystad
• [Elecraft] Missing thermal pad in KAT500 kit   Phil Hystad
• [Elecraft] [KAT500] Remote location photos   Phil Hystad
• [Elecraft] Is it possible to generate 1750Hz tone on HF with   Edward Dickinson III
• [Elecraft] I/Q Software   Edward Dickinson III
• [Elecraft] KAT500 a good tuner or great tuner   Edward Dickinson III
• [Elecraft] Si570 variant inside KX3   Alan Ibbetson
• [Elecraft] KXBC3 "observations"   Ignacy
• [Elecraft] K3 and band data future?   Ignacy
• [Elecraft] Why are my messages being cut off at the subject line?   Ingo Meyer, DK3RED
• [Elecraft] K3 + SDR-IQ and regular CW operation   Irizarry, Michael S
• [Elecraft] K2 CW filters   Ariel Jacala
• [Elecraft] 10 Watt DX   Ariel Jacala
• [Elecraft] k3 transverter output power unstable   Jack
• [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.   Paul Jackson
• [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.   Paul Jackson
• [Elecraft] [K3] autonotch now distorts SSB audio   Steve Jackson
• [Elecraft] [KPA500] latest upgrade   Steve Jackson
• [Elecraft] [KPA500] latest upgrade   Steve Jackson
• [Elecraft] [KPA500] that's what I was running, definitely causes the problem   Steve Jackson
• [Elecraft] K3 with linear amp?   Scott James
• [Elecraft] KX3 and Edirol FA-66 ?   Jan
• [Elecraft] K3 Suddenly no power out / high SWR on 10m only   Fred Jensen
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   Fred Jensen
• [Elecraft] OT: definition of semi-breakin   Fred Jensen
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   Fred Jensen
• [Elecraft] Are you satisfied with your K3?   Fred Jensen
• [Elecraft] K3 - spurious signal.   Fred Jensen
• [Elecraft] K3 - spurious signal.   Fred Jensen
• [Elecraft] KPA500 - SWR into K3   Fred Jensen
• [Elecraft] K3 - amp and tuner question   Fred Jensen
• [Elecraft] KAT500 Tuning issue   Fred Jensen
• [Elecraft] KPA500 - SWR into K3   Fred Jensen
• [Elecraft] KPA500 - SWR into K3   Fred Jensen
• [Elecraft] K3 memory editor programming 2m repeaters   Fred Jensen
• [Elecraft] Vibroplex   Fred Jensen
• [Elecraft] K3: "SPKR+PH" - not sticky   Fred Jensen
• [Elecraft] K3 Split in CW   Fred Jensen
• [Elecraft] [KAT500 and OT] Is a tuner using VNA feasible ?   Fred Jensen
• [Elecraft] Long Messages   Fred Jensen
• [Elecraft] K3 Clock loses time   Fred Jensen
• [Elecraft] K2 Memory and 60 meters management   Fred Jensen
• [Elecraft] K2 Memory and 60 meters management   Fred Jensen
• [Elecraft] Problem with a K3 screw   Fred Jensen
• [Elecraft] [OT] RBW of CW Skimmer?   Fred Jensen
• [Elecraft] Problem Firmware and K3   Fred C. Jensen
• [Elecraft] KPA500 + KPAK3AUX   Joe Subich, W4TV
• [Elecraft] [K3] Band data problem   Joe Subich, W4TV
• [Elecraft] [K3] Band data problem   Joe Subich, W4TV
• [Elecraft] K3 & SDR-IQ from re-space   Joe Subich, W4TV
• [Elecraft] OT: definition of semi-breakin   Joe Subich, W4TV
• [Elecraft] K3 line out - Stereo vs Mono   Joe Subich, W4TV
• [Elecraft] K3 line out - Stereo vs Mono   Joe Subich, W4TV
• [Elecraft] K3 is an SDR?   Joe Subich, W4TV
• [Elecraft] K3 PSK split?   Joe Subich, W4TV
• [Elecraft] K3 question, PSK and AM filter option from G4HUE   Joe Subich, W4TV
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   Joe Subich, W4TV
• [Elecraft] KAT500 Kit Builders   John_N1JM
• [Elecraft] KAT500 Kit Builders   John_N1JM
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   John_N1JM
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   John_N1JM
• [Elecraft] Elecraft and Mac OS X   John_N1JM
• [Elecraft] K3 Clock loses time   John_N1JM
• [Elecraft] K3 6khz filter question   John_N1JM
• [Elecraft] KX3 FS   John_N1JM
• [Elecraft] K3 / SLUSB / CocoaModem   Oliver Johns
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Chris Johnson
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Chris Johnson
• [Elecraft] [KX1] Alignment Question   Chris Johnson
• [Elecraft] [KX1] Alignment Question   Chris Johnson
• [Elecraft] [KX1] Alignment Question   Chris Johnson
• [Elecraft] [KX3] CW anytime   Chris Johnson
• [Elecraft] Wall wart for KX3   Dave Johnson
• [Elecraft] Keying the K3 for RTTY   Lyle Johnson
• [Elecraft] AO-7 operation with K3?   Lyle Johnson
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Lyle Johnson
• [Elecraft] New Output Power Issue   Lyle Johnson
• [Elecraft] New Output Power Issue   Lyle Johnson
• [Elecraft] KAT-500   D Joyce
• [Elecraft] [K3] PR6 to RCV ANT - BNC Connectors   D Joyce
• [Elecraft] K3 Key jack   D Joyce
• [Elecraft] K2 For Sale   K0ZL
• [Elecraft] KPA 100 L16 and RFC1   K1FFX
• [Elecraft] Big weakness in Macro's   Rich - K1HTV
• [Elecraft] Help,advise K3/KPA500 problem   Guy Olinger K2AV
• [Elecraft] K3 key clicks   Guy Olinger K2AV
• [Elecraft] Poor AM audio   Guy Olinger K2AV
• [Elecraft] Use of the subject line.   K2GN
• [Elecraft] Long Messages   K2GN
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   Mike K2MK
• [Elecraft] K3 stereo volume balance   Mike K2MK
• [Elecraft] K312MDKT   Mike K2MK
• [Elecraft] K3 Split in CW   Mike K2MK
• [Elecraft] Problem Firmware and K3   Mike K2MK
• [Elecraft] Problem with a K3 screw - suggestions needed   Mike K2MK
• [Elecraft] K-3 External Speaker Issue   Mike K2MK
• [Elecraft] K-3 External Speaker Issue   Mike K2MK
• [Elecraft] Vibroplex   Joe K2UF
• [Elecraft] (K3) 10 Watt DX   Joe K2UF
• [Elecraft] KPA500 CAT commands   Joe K2UF
• [Elecraft] K3 + Icon   Vic K2VCO
• [Elecraft] K3 + Icon   Vic K2VCO
• [Elecraft] K3 SWR   Vic K2VCO
• [Elecraft] How Tin-Whiskers Form   Vic K2VCO
• [Elecraft] K3 stereo volume balance   Vic K2VCO
• [Elecraft] DX SPOTS IPAD   Vic K2VCO
• [Elecraft] [KX3] Begali Adventure Mono arrives in VK   Vic K2VCO
• [Elecraft] new KPA 500 question   Vic K2VCO
• [Elecraft] KAT500 question   Vic K2VCO
• [Elecraft] K3 Clock loses time   Vic K2VCO
• [Elecraft] Problem with a K3 screw   Vic K2VCO
• [Elecraft] KPA500 PWR Display   Ken K3IU
• [Elecraft] KPA500 PWR Display   Ken K3IU
• [Elecraft] KPA500 PWR Display   Ken K3IU
• [Elecraft] KPA500 faults on first dit at times   Ken Wagner K3IU
• [Elecraft] RTTY Problem   K3RWN
• [Elecraft] KKAT500 - Oh, the Joy!   John K3TN
• [Elecraft] [K3] SO2V?   John K3TN
• [Elecraft] KAT500: The Wisdom of the Tuner   John K3TN
• [Elecraft] KX3 Feature Christmas Wish   K3WWP
• [Elecraft] KX3 Feature Christmas Wish   K3WWP
• [Elecraft] KAT500 Tuning issue   Anthony Scandurra K4QE
• [Elecraft] K3 Abberation   K5WA
• [Elecraft] DX SPOTS IPAD   Kenneth Waites K5WK
• [Elecraft] Power pole connection comes loose   Bob K6UJ
• [Elecraft] Power pole connection comes loose   Bob K6UJ
• [Elecraft] missed market   Bob K6UJ
• [Elecraft] missed market   Bob K6UJ
• [Elecraft] missed market   Bob K6UJ
• [Elecraft] K3 with SDR-IQ and external antenna for SDR-IQ?   K7MDL
• [Elecraft] K144XV?   K7MDL
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   K7MJG
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   K7MJG
• [Elecraft] Possible firmware regression related to ACC2 IO / PTT=LO   K7MJG
• [Elecraft] New Output Power Issue   Bill K9YEQ
• [Elecraft] New Output Power Issue   Bill K9YEQ
• [Elecraft] New Output Power Issue   Bill K9YEQ
• [Elecraft] New Output Power Issue   Bill K9YEQ
• [Elecraft] Long Messages   Bill K9YEQ
• [Elecraft] Long Messages   Bill K9YEQ
• [Elecraft] Problem with a K3 screw   Bill K9YEQ
• [Elecraft] Computer died during load   KC9GSM
• [Elecraft] K3 HRD Ver 6   KD8NNU
• [Elecraft] K3 Split in CW   KD8NNU
• [Elecraft] K3 and HRD   KD8NNU
• [Elecraft] KAT500 shipping time?   Jim - KE8G
• [Elecraft] K2 Filter Alignment   Bernie KF0QS
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   KGØUS
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   KGØUS
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   KM4VX
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   KM4VX
• [Elecraft] Fwd: KX3 Micro Manual Available in Apple App Store from Elecraft Digest, Vol 103, Issue 32   Mike KS7D
• [Elecraft] Poor AM audio   KU4AF
• [Elecraft] KAT500 and SWR   Ian Kahn
• [Elecraft] New Output Power Issue   Ian Kahn
• [Elecraft] Power pole connection comes loose   Phil Kane
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Phil Kane
• [Elecraft] missed market   Phil Kane
• [Elecraft] Long Messages   Phil Kane
• [Elecraft] K2 Memory and 60 meters management   Phil Kane
• [Elecraft] Problem with a K3 screw   Phil Kane
• [Elecraft] Clock loses time   Phil Kane
• [Elecraft] Clock loses time   Phil Kane
• [Elecraft] New Yahoo Group Formed   Keith-K5ENS
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Keith-K5ENS
• [Elecraft] KAT500 Kit   Keith-K5ENS
• [Elecraft] KAT500 a good tuner or great tuner   Keith-K5ENS
• [Elecraft] KAT500 a good tuner or great tuner   Keith-K5ENS
• [Elecraft] KAT500 a good tuner or great tuner   Keith-K5ENS
• [Elecraft] KAT500 a good tuner or great tuner   Keith-K5ENS
• [Elecraft] KAT500 LC settings recall -- complete explanation (including auxBus tradeoffs)   Keith-K5ENS
• [Elecraft] KAT500 a good tuner or great tuner   Keith-K5ENS
• [Elecraft] KAT500: The Wisdom of the Tuner   Keith-K5ENS
• [Elecraft] OT   Max Kempson
• [Elecraft] K2 - How low (in voltage) can it go?   Chris Kimball
• [Elecraft] K3, A calibration question   Paul Kirley
• [Elecraft] K3 Firmware upload elapsed time   Nand Kishore
• [Elecraft] K3 Firmware upload elapsed time   Nand Kishore
• [Elecraft] K3 Firmware upload elapsed time   Nand Kishore
• [Elecraft] K3 Firmware upload elapsed time   Nand Kishore
• [Elecraft] K3 Firmware upload elapsed time   Nand Kishore
• [Elecraft] NEW k3 and UPS   Nand Kishore
• [Elecraft] KX3 battery charge level   Gordon Klemp
• [Elecraft] [W2] Trade 2kw coupler for 200w HF coupler?   Steven Kline
• [Elecraft] FS: K3 Filters   Steven Kline
• [Elecraft] K312MDKT   Steven Kline
• [Elecraft] kx3 cw key-up carrier   Jim Klitzing
• [Elecraft] KX3 cw key-up bleed-through   Jim Klitzing
• [Elecraft] OT: "Tin whiskers"   Ken G Kopp
• [Elecraft] Selling my K2.   Ken G Kopp
• [Elecraft] OT: Missed market rant   Ken G Kopp
• [Elecraft] K3 near salt water   Ken G Kopp
• [Elecraft] Long Messages   Ken G Kopp
• [Elecraft] K1 Backlight Installation   Scott Krebs
• [Elecraft] K1 RF Board Trimmer Caps   Scott Krebs
• [Elecraft] K1 RF Board Trimmer Caps   Scott Krebs
• [Elecraft] ESD Protection for K3 Assembly   Jay Krishna
• [Elecraft] Fans on K3/100   Jay Krishna
• [Elecraft] K3 SWR   Jay Krishna
• [Elecraft] K3/100 into DX-CC antenna (HI-SWR)   Jay Krishna
• [Elecraft] K3/100 into DX-CC antenna (HI-SWR)   Jay Krishna
• [Elecraft] Vedr: Re: K3 and HRD   Martin Storli - LA8OKA
• [Elecraft] FS N-gen   Gordon LaPoint
• [Elecraft] Cheap and Easy SDR   Barry LaZar
• [Elecraft] I/Q Software   Barry LaZar
• [Elecraft] missed market   Randy Lake
• [Elecraft] KX3 Temp Comp Utility   John Lally
• [Elecraft] KX3 reverse polarity power   Peter Lambert
• [Elecraft] KXBC3 "observations"   Peter Lambert
• [Elecraft] K3 VFO tuning noise   Peter Lambert
• [Elecraft] K3 Firmware upload elapsed time   Dave Lankshear
• [Elecraft] KPA500 output on 6 meters   Pete Lascell
• [Elecraft] K3 is an SDR?   John Lawrence
• [Elecraft] [K3] Tune beep too loud   Jim LeFevre
• [Elecraft] missed market   Josh Lehan
• [Elecraft] Wall wart for KX3   Josh Lehan
• [Elecraft] kx3 aUTO-oN!   Jason Lehmann
• [Elecraft] DX SPOTS IPAD   John Lemay
• [Elecraft] Elecraft Digest, Vol 104, Issue 32   William Levy
• [Elecraft] Elecraft Digest, Vol 104, Issue 45   William Levy
• [Elecraft] KX3 RTTY   Dave Lindsley
• [Elecraft] KX3 RTTY   Dave Lindsley
• [Elecraft] Ham Radio Deluxe works great with my KX3!   Dave Lindsley
• [Elecraft] Are you satisfied with your K3?   David Little
• [Elecraft] Speakers and other Bright Ideas… Maybe not so Bright...   Phil Townsend Lontz
• [Elecraft] ESD Protection for K3 Assembly   Philip Townsend Lontz
• [Elecraft] ESD Protection for K3 Assembly   Philip Townsend Lontz
• [Elecraft] AO-7 operation with K3?   Al Lorona
• [Elecraft] [OT] RBW of CW Skimmer?   Al Lorona
• [Elecraft] P3 -- Span slow to update   Dan Maase
• [Elecraft] K3 VLF transverter?   Geoffrey Mackenzie-Kennedy
• [Elecraft] K3 VLF transverter?   Geoffrey Mackenzie-Kennedy
• [Elecraft] K3 key clicks   Geoffrey Mackenzie-Kennedy
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Geoffrey Mackenzie-Kennedy
• [Elecraft] K? for remote rx only   Geoffrey Mackenzie-Kennedy
• [Elecraft] KX3 Schematic.   Geoffrey Mackenzie-Kennedy
• [Elecraft] KX3 Schematic.   Geoffrey Mackenzie-Kennedy
• [Elecraft] December RFTB Tonight   Larry Makoski
• [Elecraft] [Elecraft_K3] [K3] k3 hiss update.   Scott Manthe
• [Elecraft] Found this on Facebook this morning... KPA800??   Scott Manthe
• [Elecraft] Found this on Facebook this morning... KPA800??   Scott Manthe
• [Elecraft] Arm Chair Settings for the K3   Scott Manthe
• [Elecraft] missed market   Scott Manthe
• [Elecraft] new KPA 500 question   Scott Manthe
• [Elecraft] [KPA500] latest upgrade   Scott Manthe
• [Elecraft] Help!   Gerald Manthey
• [Elecraft] KX3 RTTY   Mark
• [Elecraft] [KAT500] KXUSBa with linux   Mike Markowski
• [Elecraft] Big weakness in Macro's   Mike Markowski
• [Elecraft] K3 Serial Port Fixed!   Martin
• [Elecraft] Problem Firmware and K3   Rob May
• [Elecraft] Thank You Elecraft Employees   David McAnally
• [Elecraft] TRX-Manager and K3   David McAnally
• [Elecraft] Easy Way to Watch Posts   Jim McCook
• [Elecraft] OT: IDIOM PRESS   Tom McCulloch
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Jim McDonald
• [Elecraft] new KPA 500 question   Bruce McLaughlin
• [Elecraft] new KPA 500 question   Bruce McLaughlin
• [Elecraft] new KPA 500 question   Bruce McLaughlin
• [Elecraft] FS: K3/100 & P3   Pete Meier
• [Elecraft] KX3 & K2/10 upgrades Speedy delivery   Barry Middleton
• [Elecraft] KX3 s/n 29*77   Barry Middleton
• [Elecraft] Power pole connection comes loose   Ron Midwin
• [Elecraft] Power Pole connection   Ron Midwin
• [Elecraft] Link to Power Pole connector assembly   Ron Midwin
• [Elecraft] FS: AMRAD Low Frequency Upconverter from QST   Mike
• [Elecraft] FS: AMRAD Low Frequency Upconverter from QST   Mike
• [Elecraft] KX3 FW Rev. 1.3!   Mike
• [Elecraft] Keying the K3 for RTTY   Bill Miller
• [Elecraft] K3: FSK, AFSK, CW   Bill Miller
• [Elecraft] [K3] Band data problem   Jim Miller
• [Elecraft] [K3] Band data problem   Jim Miller
• [Elecraft] [K3] Band data problem   Jim Miller
• [Elecraft] FS: KFL3A-1.0K   Jim Miller
• [Elecraft] [K3] RX input safe limit?   Jim Miller
• [Elecraft] [K3] RX input safe limit?   Jim Miller
• [Elecraft] Serial Daisy Chain   Jim Miller
• [Elecraft] K3 Filters (again???!!) - Many Thanks   Jim Miller
• [Elecraft] [K3] SO2V?   Jim Miller
• [Elecraft] K144XV?   Jim Miller
• [Elecraft] K3 rig control/CW serial interface   david Moes
• [Elecraft] K3 Abberation   david Moes
• [Elecraft] Speakers and other Bright Ideas… Maybe not so Bright...   david Moes
• [Elecraft] (K3) 10 Watt DX   david Moes
• [Elecraft] K3 and HRD   david Moes
• [Elecraft] Problem Firmware and K3   david Moes
• [Elecraft] K3 Clock loses time   david Moes
• [Elecraft] Speakers and other Bright Ideas… Maybe not so Bright...   David Moes
• [Elecraft] are KXUSB and KXUSBa interchangeable?   Scott Monks
• [Elecraft] KUSB Noise Query - K3   Scott Monks
• [Elecraft] are KXUSB and KXUSBa interchangeable?   Scott Monks
• [Elecraft] Problem Firmware and K3   MontyS
• [Elecraft] KX3: iPad spectrum display   Andrew Moore
• [Elecraft] K3 + Icon   Andrew Moore
• [Elecraft] K3 + Icon   Andrew Moore
• [Elecraft] K3 + Icon   Andrew Moore
• [Elecraft] iSDR app and KX3 not working   Andrew Moore
• [Elecraft] Clock loses time   Andrew Moore
• [Elecraft] K2 - Cost estimate for repairs   Dennis Moore
• [Elecraft] K2 - Cost estimate for repairs   Dennis Moore
• [Elecraft] Problem Firmware and K3   Randy Moore
• [Elecraft] KX3 VFO tuning noise...an observation...   David Moorman
• [Elecraft] KUSB Noise Query - K3   Brian Moran
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Sam Morgan
• [Elecraft] [K3] Owners manual update request <was> Re: K3 + Icon   Sam Morgan
• [Elecraft] [KAT500] Cabling Diagram   Roy Morris
• [Elecraft] [KAT500] Cabling Diagram   Roy Morris
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Roy Morris
• [Elecraft] Rigblaster Plus with Elecraft K3   Ed Muns
• [Elecraft] How to avoid Elecraft list email overload: Nabble andother web archives   Ed Muns
• [Elecraft] KX1 KXPD1 tips?   Barry N1EU
• [Elecraft] Found this on Facebook this morning... KPA800??   N2TK, Tony
• [Elecraft] How Tin-Whiskers Form   N2TK, Tony
• [Elecraft] [K3] PR6 to RCV ANT - BNC Connectors   N3XX
• [Elecraft] [K3] PR6 to RCV ANT - BNC Connectors   N3XX
• [Elecraft] K3 - Noise on main RX while tuning second RX   Pete Smith N4ZR
• [Elecraft] K3 - Noise on main RX while tuning second RX - update   Pete Smith N4ZR
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Pete Smith N4ZR
• [Elecraft] Cheap and Easy SDR   Pete Smith N4ZR
• [Elecraft] K3 VFO tuning noise   Pete Smith N4ZR
• [Elecraft] Surface Mount IC Repairs was Re: K3 Serial Port Fixed!   Pete Smith N4ZR
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   N5GE
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   N5GE
• [Elecraft] OT: IDIOM PRESS   N5GE
• [Elecraft] Big weakness in Macro's   N5GE
• [Elecraft] Question   Milt -- N5IA
• [Elecraft] Question   Milt -- N5IA
• [Elecraft] P3 -- Span slow to update   Paul Saffren N6HZ
• [Elecraft] P3 -- Span slow to update   Paul Saffren N6HZ
• [Elecraft] K3 rig control/CW serial interface   iain macdonnell - N6ML
• [Elecraft] K3 Suddenly no power out / high SWR on 10m only   iain macdonnell - N6ML
• [Elecraft] K3 Suddenly no power out / high SWR on 10m only   iain macdonnell - N6ML
• [Elecraft] K3 Suddenly no power out / high SWR on 10m only   iain macdonnell - N6ML
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   iain macdonnell - N6ML
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   iain macdonnell - N6ML
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   iain macdonnell - N6ML
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   iain macdonnell - N6ML
• [Elecraft] [KAT500] Tuning   iain macdonnell - N6ML
• [Elecraft] KAT500 to K3 and KPA500 Cabling   iain macdonnell - N6ML
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   iain macdonnell - N6ML
• [Elecraft] are KXUSB and KXUSBa interchangeable?   iain macdonnell - N6ML
• [Elecraft] K3 KAT500 'Err AT3'   iain macdonnell - N6ML
• [Elecraft] Remote power on/off progress for K3   iain macdonnell - N6ML
• [Elecraft] K3 Macros in memory   iain macdonnell - N6ML
• [Elecraft] [KAT500] Looking for a microcontroller project that reads transceiver serial frequency messages and outputs BCD bands   iain macdonnell - N6ML
• [Elecraft] K3 won't shut off?   iain macdonnell - N6ML
• [Elecraft] K3 won't shut off?   iain macdonnell - N6ML
• [Elecraft] KPA500 presents high SWR to radio driving it   ARRL - N6MQL
• [Elecraft] K3/0 to K3/100 twin issue at K6LRG   Chris Tate - N6WM
• [Elecraft] K3/0 to K3/100 twin issue at K6LRG   Chris Tate - N6WM
• [Elecraft] K3 is an SDR?   Rick Tavan N6XI
• [Elecraft] NAQCC Sprint Tuesday night!   NAQCC
• [Elecraft] KX3 with 01.27 Firmware - improved RX on FM   Skip NC9O
• [Elecraft] K3 question, PSK and AM filter option from G4HUE   ANDY NEHAN
• [Elecraft] W2 Interface Question   NZ0T
• [Elecraft] W2 Interface Question   NZ0T
• [Elecraft] W2 Interface Question   NZ0T
• [Elecraft] W2 Interface Question   NZ0T
• [Elecraft] Problem with a K3 screw - suggestions needed   Fabio IZ4AFW / NZ1W
• [Elecraft] Wanted: KX3   NZ8J
• [Elecraft] FS: KX3   NZ8J
• [Elecraft] Elecraft W2 wattmeter with 3 sensors for sale   NZ8J
• [Elecraft] KX3 and W2 have been sold   NZ8J
• [Elecraft] AO-7 operation with K3?   Nels Nelsen
• [Elecraft] I/Q Software   Arlon Nelson
• [Elecraft] Software   Arlon Nelson
• [Elecraft] FS KX1   Darrin Newlander
• [Elecraft] Checking U1 for communication with the K3   Art Nienhouse
• [Elecraft] Checking U1 for communication with the K3   Art Nienhouse
• [Elecraft] Selling my K2.   JP O'Connor
• [Elecraft] microphone issue on K3   OE5CSP-Chris
• [Elecraft] KPA500 + KPAK3AUX   Franki ON5ZO
• [Elecraft] OT: definition of semi-breakin   Jessie Oberreuter
• [Elecraft] KX3 offset with transverter   Erik Overbye Olsen
• [Elecraft] Arm Chair Settings for the K3   John Oppenheimer
• [Elecraft] KXPA100   P.J.Hicks
• [Elecraft] Problem with a K3 screw   P.J.Hicks
• [Elecraft] K3: "SPKR+PH" - not sticky   PTA_ABD
• [Elecraft] [K3]Noise Filter (NF) ADJ   Papabravo
• [Elecraft] Are you satisfied with your K3?   Ralph Parker
• [Elecraft] slowing down the bug - carpenter's stair guages   Brian Pepperdine
• [Elecraft] SELL: K2 External amplifier and Automatic tuner   David Perrin
• [Elecraft] SELL: K2 with built in L network auto tuner and Nicad battery.   David Perrin
• [Elecraft] K2 For sale correction, my bad   David Perrin
• [Elecraft] KX-3 and KPA-500?   Doug Person
• [Elecraft] KAT500 LC settings recall -- complete explanation   Larry Phipps
• [Elecraft] Wall wart for KX3   Ed Picha
• [Elecraft] Are you satisfied with your K3?   chris Pickett
• [Elecraft] Sideband noise of K3 transceiver ...   Samir Popaja
• [Elecraft] K3 / SLUSB / CocoaModem   Rick Prather
• [Elecraft] K3 / SLUSB / CocoaModem   Rick Prather
• [Elecraft] 12 meter band on K3   Rick Prather
• [Elecraft] PL-2303 USB-Serial Drivers   Rick Prather
• [Elecraft] Question   Rick Prather
• [Elecraft] kx3 macbook air programs   Rick Prather
• [Elecraft] SSTV on the P3   David Pratt
• [Elecraft] [K3] SSTV on the P3   David Pratt
• [Elecraft] FS N-gen   Alan Price
• [Elecraft] N-Gen sold   Alan Price
• [Elecraft] Let me build a K2 for you.   Alan Price
• [Elecraft] KUSB with FTDI Chipset for sale   Alan Price
• [Elecraft] Sold   Alan Price
• [Elecraft] KX3 Alignment Question   Alan Price
• [Elecraft] KX3 Questions   Alan Price
• [Elecraft] Ham Radio Deluxe works great with my KX3!   Alan Price
• [Elecraft] Poor AM audio   Dave Purola
• [Elecraft] K2 - Cost estimate for repairs   Dale Putnam
• [Elecraft] FW: Elecraft K1 for sale   Dale Putnam
• [Elecraft] auto tuners   Dale Putnam
• [Elecraft] Clock loses time   Dale Putnam
• [Elecraft] [K3} Power-On Failure   Don Putnick
• [Elecraft] UPDATE: [K3} Power-On Failure   Don Putnick
• [Elecraft] [KAT500] Please help with Mac-KAT500 interface   Don Putnick
• [Elecraft] [KAT500] Please help with Mac-KAT500 interface   Don Putnick
• [Elecraft] K3/0, Remote Rig & Winkey   R.S.Hradilek
• [Elecraft] KAT500 shipping time?   Randy
• [Elecraft] KX3: iPad spectrum display   Giampiero Raschetti
• [Elecraft] Custom Dust Covers for K3, P3, and KPA500   Michael Raskin
• [Elecraft] Elecraft K3 Nifty Mini-Manual.   Michael Raskin
• [Elecraft] MH2 Hand Microphone   Michael Raskin
• [Elecraft] Proset-K2 Boom Headset For the K3/ K2 - PRICE REDUCED   Michael Raskin
• [Elecraft] Array Solutions K3THP2 Cable for K3 ALC & Band Data to THP-2.5KFX   Michael Raskin
• [Elecraft] CW Skimmer   George Rebong
• [Elecraft] My first contact using my KX3 and Buddipole combination   David F. Reed
• [Elecraft] Are you satisfied with your K3?   David F. Reed
• [Elecraft] Why are my messages being cut off at the subject line?   David F. Reed
• [Elecraft] DX SPOTS IPAD   David F. Reed
• [Elecraft] [KAT500] Tuning   John Reilly
• [Elecraft] Elecraft and Mac OS X   Mike Reublin
• [Elecraft] K3 / SLUSB / CocoaModem   Mike Reublin
• [Elecraft] K3: FSK, AFSK, CW   Mike Reublin
• [Elecraft] K3 is an SDR?   Mike Reublin
• [Elecraft] Ham Radio Deluxe works great with my KX3!   Mike Reublin
• [Elecraft] KAT500 kits who has received it?   Jim Rhodes
• [Elecraft] Serial Daisy Chain   Jim Rhodes
• [Elecraft] KAT500-f   Jim Rhodes
• [Elecraft] RTTY Problem   Jim Rhodes
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   Jim Rhodes
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   Jim Rhodes
• [Elecraft] Remote power on/off progress for K3   Jim Rhodes
• [Elecraft] Use of the subject line.   Jim Rhodes
• [Elecraft] K3 assembly questiion   Rich
• [Elecraft] (K3) Assembly (again) Front head   Rich
• [Elecraft] missed market   Rick McClelland, AA5S
• [Elecraft] K-3 External Speaker Issue   Bill Robbins
• [Elecraft] REC stopped working on my K2   Stephen Roberts
• [Elecraft] Power pole connection comes loose   Stephen Roberts
• [Elecraft] K2 CW filters   Stephen Roberts
• [Elecraft] Carry case for the K1   Stephen Roberts
• [Elecraft] missed market   Stephen Roberts
• [Elecraft] Vibroplex   Stephen Roberts
• [Elecraft] KX3 transverter mode   Robin
• [Elecraft] K1 for sale   James Rodenkirch
• [Elecraft] Elecraft K1 for sale   James Rodenkirch
• [Elecraft] [K3] k3 hiss update.   Mike Rodgers
• [Elecraft] [Elecraft_K3] [K3] k3 hiss update.   Mike Rodgers
• [Elecraft] A Ham's Night Before Christmas   Mike Rodgers
• [Elecraft] [K3] Re:10w DX   Mike Rodgers
• [Elecraft] [K3] Re: New Output Power Questions   Mike Rodgers
• [Elecraft] [K3] Re: Problem with firmware and K3   Mike Rodgers
• [Elecraft] Long Messages   Mike Rodgers
• [Elecraft] [K3] clock loses time   Mike Rodgers
• [Elecraft] [K3] Re: Bad AM Audio in RX   Mike Rodgers
• [Elecraft] Cheap and Easy SDR   Wayne Rogers
• [Elecraft] KPA500 # 1170 up and running!   Lu Romero
• [Elecraft] Are you satisfied with your K3?   Lu Romero
• [Elecraft] Fwd: Custom Dust Covers for K3, P3, and KPA500   Rose
• [Elecraft] Elecraft] Custom Dust Covers for K3, P3, and KPA500   Rose
• [Elecraft] To the Elecraft Family   Rose
• [Elecraft] K3/100 into DX-CC antenna (HI-SWR)   Rose
• [Elecraft] KAT500 Tuning issue   Vic Rosenthal
• [Elecraft] K1 For Sale   Lou Roux
• [Elecraft] K3 Firmware problem   Rudi
• [Elecraft] Problem Firmware and K3   Rudi
• [Elecraft] K3 Firmware problem solved.   Rudi
• [Elecraft] K3/0, Remote Rig & Winkey   Björn SM0MDG
• [Elecraft] K3: FSK, AFSK, CW   Reginald J Mackey SR
• [Elecraft] kx3 memory mode   Reginald J Mackey SR
• [Elecraft] Power pole connection comes loose   Phil & Debbie Salas
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Phil & Debbie Salas
• [Elecraft] [KAT500]schematic   Phil & Debbie Salas
• [Elecraft] [KX3} TenTec 418 QST Review   Phil & Debbie Salas
• [Elecraft] KX3 CW   Steve Saslow
• [Elecraft] Vibroplex   John Saxon
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Anthony Scandurra
• [Elecraft] Power pole connection comes loose   Terry Schieler
• [Elecraft] Power pole connection comes loose   Terry Schieler
• [Elecraft] (K3) Assembly (again) Front head   Terry Schieler
• [Elecraft] K3 HRD Ver 6   Chris Schrecengost
• [Elecraft] K3 HRD Ver 6   Chris Schrecengost
• [Elecraft] HRD v 6 and K3   Chris Schrecengost
• [Elecraft] K3 near salt water   Merv Schweigert
• [Elecraft] KBPF3 coverage   Merv Schweigert
• [Elecraft] KX3 amplified mobile speaker   Mike Schwendeman
• [Elecraft] Problem with a K3 screw   Scott
• [Elecraft] No ON/OFF Switch on KAT500   John Scott
• [Elecraft] No ON/OFF Switch on KAT500   John Scott
• [Elecraft] Why are my messages being cut off at the subject line?   John Scott
• [Elecraft] Thanks to all   John Scott
• [Elecraft] KPA500 output on 6 meters   Sebastian, W4AS
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KAT500 a good tuner or great tuner   John Shaw
• [Elecraft] KX3: iPad spectrum display   Jim Sheldon
• [Elecraft] KAT500/F Missing thermal pad on R5   Jim Sheldon
• [Elecraft] KAT500/F Missing thermal pad on R5   Jim Sheldon
• [Elecraft] Wall wart for KX3   Jim Sheldon
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   Jim Sheldon
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   Jim Sheldon
• [Elecraft] Missing thermal pad in KAT500 kit   Jim Sheldon
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft Net on 14.3035   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (12/9/12) and net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (12/16/12)   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] Elecraft SSB Net results (12/23/12)   Phillip Shepard
• [Elecraft] Elecraft SSB net announcement   Phillip Shepard
• [Elecraft] missed market   Doug Shields
• [Elecraft] Is it possible to generate 1750Hz tone on HF with the K3 ?   Ray Sills
• [Elecraft] K3/100 for sale   Simonsenrick
• [Elecraft] KPA500 kit with problems   Barry Simpson
• [Elecraft] (K3) Assembly (again) Front head   Barry Simpson
• [Elecraft] OT: definition of semi-breakin   Johnny Siu
• [Elecraft] Found this on Facebook this morning... KPA800??   Johnny Siu
• [Elecraft] (Elecraft) K3   Fred Smith
• [Elecraft] KAT500 on top of the KAP500   Fred Smith
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   Fred Smith
• [Elecraft] K2 - Cost estimate for repairs   Fred Smith
• [Elecraft] K2 - Cost estimate for repairs   Fred Smith
• [Elecraft] Power pole connection comes loose   Fred Smith
• [Elecraft] OT: IDIOM PRESS   Fred Smith
• [Elecraft] Power pole connection comes loose   Fred Smith
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   Fred Smith
• [Elecraft] OT: IDIOM PRESS   Fred Smith
• [Elecraft] Settings for CW filter 400hz   Fred Smith
• [Elecraft] Are you satisfied with your K3?   Fred Smith
• [Elecraft] Settings for CW filter 400hz   Fred Smith
• [Elecraft] ESD Protection for K3 Assembly   Fred Smith
• [Elecraft] OT: IDIOM PRESS   Fred Smith
• [Elecraft] Are you satisfied with your K3?   Fred Smith
• [Elecraft] Are you satisfied with your K3?   Fred Smith
• [Elecraft] Settings for CW filter 400hz   Fred Smith
• [Elecraft] Are you satisfied with your K3?   Fred Smith
• [Elecraft] Customer Support   Fred Smith
• [Elecraft] Found this on Facebook this morning... KPA800??   Fred Smith
• [Elecraft] Selling my K2.   Fred Smith
• [Elecraft] Selling my K2.   Fred Smith
• [Elecraft] K3 Front End Protection   Fred Smith
• [Elecraft] K3 Front End Protection   Fred Smith
• [Elecraft] missed market   Fred Smith
• [Elecraft] missed market   Fred Smith
• [Elecraft] missed market   Fred Smith
• [Elecraft] missed market   Fred Smith
• [Elecraft] K144XV vs XV144   Fred Smith
• [Elecraft] K3 KPA500 clearance under shelf   Fred Smith
• [Elecraft] auto tuners   Fred Smith
• [Elecraft] KX3 will it work as K3/0   Fred Smith
• [Elecraft] KX3 will it work as K3/0   Fred Smith
• [Elecraft] Sub RX Filters choice   Fred Smith
• [Elecraft] new KPA 500 question   Fred Smith
• [Elecraft] new KPA 500 question   Fred Smith
• [Elecraft] I've been thinking!   Fred Smith
• [Elecraft] I've been thinking!   Fred Smith
• [Elecraft] I've been thinking!   Fred Smith
• [Elecraft] K3/KPA500/KAT500 Help   Fred Smith
• [Elecraft] Problem with a K3 screw - suggestions needed   Fred Smith
• [Elecraft] Elecraft Digest, Vol 104, Issue 45   Fred Smith
• [Elecraft] Mail List Guidelines   Fred Smith
• [Elecraft] [KX3]2M Module   Fred Smith
• [Elecraft] Poor AM audio   Fred Smith
• [Elecraft] remembering per band changes K3   Gary Smith
• [Elecraft] K3 Out of Warranty Repairs   Gary Smith
• [Elecraft] K3 SWR & S meter not functioning   Gary Smith
• [Elecraft] KAT500 and TX delay feature request   Igor Sokolov
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Igor Sokolov
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   Igor Sokolov
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500(Video)   Igor Sokolov
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500(Video)   Igor Sokolov
• [Elecraft] [KAT500] Tuning   Igor Sokolov
• [Elecraft] [K3] SO2V?   Igor Sokolov
• [Elecraft] [K3] SO2V?   Igor Sokolov
• [Elecraft] KAT500 a good tuner or great tuner   Igor Sokolov
• [Elecraft] K2 #7340 PreAmp Problem   Ray Spreadbury
• [Elecraft] K2 #7340 PreAmp Problem   Ray Spreadbury
• [Elecraft] K2 #7340 PreAmp Problem   Ray Spreadbury
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   Jeff Stai
• [Elecraft] Dueling CQ During Mixed Mode 10 Meter Contest   Jeff Stai
• [Elecraft] KAT-500   Charles Stampf
• [Elecraft] Elecraft - Long Messages   Charles Stampf
• [Elecraft] Elecraft and Mac OS X   Bob Stephens
• [Elecraft] KX3 battery charge level   Bob Stephens
• [Elecraft] KX3 guestion   Bob Stephens
• [Elecraft] KX3 guestion   Bob Stephens
• [Elecraft] FS N-gen   Chip Stratton
• [Elecraft] Fwd: KX3 Micro Manual Available in Apple App Store from Elecraft Digest, Vol 103, Issue 32   Chip Stratton
• [Elecraft] Are you satisfied with your K3?   Robert G. Strickland
• [Elecraft] Are you satisfied with your K3?   Robert G. Strickland
• [Elecraft] Are you satisfied with your K3?   Robert G. Strickland
• [Elecraft] KAT500 tuning help   Robert G. Strickland
• [Elecraft] K3 Clock loses time   Jon Stromsland
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Gary Surrency
• [Elecraft] MCU 4.60 / DSP 2.80, 11/17/2012   István Szabó
• [Elecraft] MCU 4.60 / DSP 2.80, 11/17/2012   István Szabó
• [Elecraft] PA for QRP rigs   István Szabó
• [Elecraft] OT: IDIOM PRESS   KENT TRIMBLE
• [Elecraft] OT: IDIOM PRESS   KENT TRIMBLE
• [Elecraft] OT: IDIOM PRESS (THREAD CLOSED)   KENT TRIMBLE
• [Elecraft] [K3] K3 Util can't connect to serial port   Paul A. Thompson
• [Elecraft] K3 Serial Port Fixed!   Paul A. Thompson
• [Elecraft] Looking for a NGen   Tim
• [Elecraft] [KX3] Begali Adventure Mono arrives in VK   Glen Torr
• [Elecraft] XV144 - does it power spike   Peter Torry
• [Elecraft] K3, A calibration question   Fred Townsend
• [Elecraft] Problem with a K3 screw   Fred Townsend
• [Elecraft] Birth Announcement: KAT500K 0313   Jack Trampler
• [Elecraft] Power pole connection comes loose   Greg Troxel
• [Elecraft] K3 HRD Ver 6   VE3NFK
• [Elecraft] [KAT500] Christmas gift   Doug VE3VS
• [Elecraft] Thank You Elecraft Employees   Ron VE8RT
• [Elecraft] How Tin-Whiskers Form   VK1OO
• [Elecraft] kx3 cw key-up carrier   Matt VK2RQ
• [Elecraft] Cady book   Matt VK2RQ
• [Elecraft] KX3 CW   Matt VK2RQ
• [Elecraft] XV144 - does it power spike   VR2BrettGraham
• [Elecraft] K3 + Icon   Paul VanOveren
• [Elecraft] "+" icon K3   Paul VanOveren
• [Elecraft] HRD v 6 and K3   John Veach
• [Elecraft] Selling my K2   Stephen Victor
• [Elecraft] Found this on Facebook this morning... KPA800??   W0FK
• [Elecraft] KAT500 Kit   Van W1WCG
• [Elecraft] Begali Adventure for KX3   W2APF
• [Elecraft] K3 KPA500 clearance under shelf   Ron W3ZV
• [Elecraft] K144XV vs XV144   Ron W3ZV
• [Elecraft] KPA500 kit with problems   Ron W3ZV
• [Elecraft] K2/10 for Sale   W4ATK
• [Elecraft] K2 For Sale   W4ATK
• [Elecraft] K2 For Sale   W4ATK
• [Elecraft] K3 is an SDR?   W4ATK
• [Elecraft] K3 is an SDR?   W4ATK
• [Elecraft] K3 HRD Ver 6   W4CCS
• [Elecraft] K3 near salt water   W4GRJ
• [Elecraft] K3 near salt water   W4GRJ
• [Elecraft] K3 near salt water   W4GRJ
• [Elecraft] K3 near salt water   W4GRJ
• [Elecraft] Just plain WOW!   W4SK
• [Elecraft] New User   W4SK
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   W4SK
• [Elecraft] OT wanted: C++ developers to help with LotW   Gregg W6IZT
• [Elecraft] K3 - SignalLink USB For Sale   Robert Dorchuck W6VY
• [Elecraft] K3 - SignalLink USB For Sale   Robert Dorchuck W6VY
• [Elecraft] How to APF   Bob W7AVK
• [Elecraft] Holiday Greetings   Bob W7AVK
• [Elecraft] KAT-500   WD0ECO
• [Elecraft] [K3] Re: Problem with firmware and K3   Jack - WE5ST
• [Elecraft] KAT500 kits who has received it?   WM3M
• [Elecraft] DX SPOTS IPAD   WM3M
• [Elecraft] KAT500 kit on its way   WM3M
• [Elecraft] Missing thermal pad in KAT500 kit   WM3M
• [Elecraft] KX3 guestion   WN8HGZ
• [Elecraft] K3 VFO tuning noise   WO0W
• [Elecraft] Clock loses time   WO0W
• [Elecraft] Data form K3   Alfredo Vélez WP3C
• [Elecraft] WT: KAT3   Alfredo Vélez WP3C
• [Elecraft] Rigblaster Plus with Elecraft K3   Alfredo Vélez WP3C
• [Elecraft] Remote power on/off progress for K3   Chad Wasinger
• [Elecraft] Remote power on/off progress for K3   Chad Wasinger
• [Elecraft] (no subject)   Mike Weir
• [Elecraft] KXBC3 and KXPD3   Mike Weir
• [Elecraft] KAT500 Tuning issue   Jerry Weisskohl
• [Elecraft] KAT500 Tuning issue   Jerry Weisskohl
• [Elecraft] KAT500 Tuning issue   Jerry Weisskohl
• [Elecraft] K3 - Navigator interface not working after 4.60 update.   Bill Wiehe
• [Elecraft] KPA 100 L16 and RFC1   Jim Wiley
• [Elecraft] K3 Serial Port Fixed!   Jim Wiley
• [Elecraft] [K3] Band data problem   Don Wilhelm
• [Elecraft] Power pole connection comes loose   Don Wilhelm
• [Elecraft] K2 - Cost estimate for repairs   Don Wilhelm
• [Elecraft] Power pole connection comes loose   Don Wilhelm
• [Elecraft] K2 - Cost estimate for repairs   Don Wilhelm
• [Elecraft] OT: definition of semi-breakin   Don Wilhelm
• [Elecraft] ESD Protection for K3 Assembly   Don Wilhelm
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   Don Wilhelm
• [Elecraft] K3 Split-Mode CW pressing "Rev" Problem   Don Wilhelm
• [Elecraft] K3 line out - Stereo vs Mono   Don Wilhelm
• [Elecraft] K2 CW filters   Don Wilhelm
• [Elecraft] Arm Chair Settings for the K3   Don Wilhelm
• [Elecraft] KAT500 remote operation   Don Wilhelm
• [Elecraft] KAT500 Tuning issue   Don Wilhelm
• [Elecraft] K1 Loose Control Knobs   Don Wilhelm
• [Elecraft] KPA500 - SWR into K3   Don Wilhelm
• [Elecraft] KPA 100 L16 and RFC1   Don Wilhelm
• [Elecraft] KX1 power supply   Don Wilhelm
• [Elecraft] help K3/KPA500   Don Wilhelm
• [Elecraft] K3 / SLUSB / CocoaModem   Don Wilhelm
• [Elecraft] K3 + SDR-IQ and regular CW operation   Don Wilhelm
• [Elecraft] Why are my messages being cut off at the subject line?   Don Wilhelm
• [Elecraft] are KXUSB and KXUSBa interchangeable?   Don Wilhelm
• [Elecraft] Sn 7385 build started but wrong resistors supplied on control board.   Don Wilhelm
• [Elecraft] Computer died during load   Don Wilhelm
• [Elecraft] 12 meter band on K3   Don Wilhelm
• [Elecraft] KPA500 Firmware Update and USB-Serial Cable ?   Don Wilhelm
• [Elecraft] K3 with SDR-IQ and external antenna for SDR-IQ?   Don Wilhelm
• [Elecraft] K3 Filters (again???!!) - Many Thanks   Don Wilhelm
• [Elecraft] KX3 config menu question   Don Wilhelm
• [Elecraft] KX3 guestion   Don Wilhelm
• [Elecraft] K-Line Faultless Operation ?   Don Wilhelm
• [Elecraft] [KX1] Alignment Question   Don Wilhelm
• [Elecraft] [KX1] Alignment Question   Don Wilhelm
• [Elecraft] KX3 CW   Don Wilhelm
• [Elecraft] Sub RX Filters choice   Don Wilhelm
• [Elecraft] KX3 Feature Christmas Wish   Don Wilhelm
• [Elecraft] Wall wart for KX3   Don Wilhelm
• [Elecraft] [KX1] Alignment Question   Don Wilhelm
• [Elecraft] K3 KAT500 'Err AT3' recurring   Don Wilhelm
• [Elecraft] Surface Mount IC Repairs was Re: K3 Serial Port Fixed!   Don Wilhelm
• [Elecraft] XV144 - does it power spike   Don Wilhelm
• [Elecraft] [KPA500] latest upgrade   Don Wilhelm
• [Elecraft] RTTY Problem   Don Wilhelm
• [Elecraft] KX3 Alignment Question   Don Wilhelm
• [Elecraft] RTTY Problem   Don Wilhelm
• [Elecraft] K3 HRD Ver 6   Don Wilhelm
• [Elecraft] Data form K3   Don Wilhelm
• [Elecraft] I've been thinking!   Don Wilhelm
• [Elecraft] K3 assembly questiion   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] K1 RF Board Trimmer Caps   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] IMPORTANT CORRECTION: K1 RF Board Trimmer Caps   Don Wilhelm
• [Elecraft] K1 RF Board Trimmer Caps   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] KAT500 question   Don Wilhelm
• [Elecraft] KAT500 a good tuner or great tuner   Don Wilhelm
• [Elecraft] K2 #7340 PreAmp Problem   Don Wilhelm
• [Elecraft] K3 with linear amp?   Don Wilhelm
• [Elecraft] K3 with linear amp?   Don Wilhelm
• [Elecraft] New Output Power Issue   Don Wilhelm
• [Elecraft] K2 #7340 PreAmp Problem   Don Wilhelm
• [Elecraft] K3, A calibration question   Don Wilhelm
• [Elecraft] Problem Firmware and K3   Don Wilhelm
• [Elecraft] K2 #7340 PreAmp Problem   Don Wilhelm
• [Elecraft] K2 is sick?   Don Wilhelm
• [Elecraft] PS for KX3   Don Wilhelm
• [Elecraft] Problem with a K3 screw - suggestions needed   Don Wilhelm
• [Elecraft] New Output Power Issue, and a new question   Don Wilhelm
• [Elecraft] Reflector postings   Don Wilhelm
• [Elecraft] K3 near salt water   Don Wilhelm
• [Elecraft] Long Messages   Don Wilhelm
• [Elecraft] (K3) Assembly (again) Front head   Don Wilhelm
• [Elecraft] K-3 External Speaker Issue   Don Wilhelm
• [Elecraft] [K2] VCO Aignment L30   Don Wilhelm
• [Elecraft] Poor AM audio   Don Wilhelm
• [Elecraft] Clock loses time   Don Wilhelm
• [Elecraft] FS: K2 QRP top cover with all options.   Don Wilhelm
• [Elecraft] FS: KAF2 for sale   Don Wilhelm
• [Elecraft] [K2] VCO Aignment L30   Don Wilhelm
• [Elecraft] K2 Filter Alignment   Don Wilhelm
• [Elecraft] k-3 2 meter   Don Wilhelm
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Don Wilhelm
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Don Wilhelm
• [Elecraft] K3 won't shut off?   Don Wilhelm
• [Elecraft] Question   Don Wilhelm
• [Elecraft] Long Messages   David Windisch
• [Elecraft] Long Messages   David Windisch
• [Elecraft] Long Messages   David Windisch
• [Elecraft] KAT500 kits who has received it?   Nelson Wittstock
• [Elecraft] Fwd: Feature Request   Charles Woods
• [Elecraft] CW Machine issue???   Paul Ormandy ZL4PW
• [Elecraft] Key Out issue   Paul Ormandy ZL4PW
• [Elecraft] K3 Firmware upload elapsed time   Matt Zilmer
• [Elecraft] [K3] Owners manual update request <was> Re: K3 + Icon   Matt Zilmer
• [Elecraft] Are you satisfied with your K3?   Matt Zilmer
• [Elecraft] [K3] K3 Util can't connect to serial port   Matt Zilmer
• [Elecraft] FS N-gen   Matt Zilmer
• [Elecraft] Fans on K3/100   Matt Zilmer
• [Elecraft] missed market   Matt Zilmer
• [Elecraft] KX3 - inexpensive - 14 volt @ 4 amp P/S   Matt Zilmer
• [Elecraft] posting directions   Matt Zilmer
• [Elecraft] Price guesstimate on KXPA100   Matt Zilmer
• [Elecraft] Price guesstimate on KXPA100   Matt Zilmer
• [Elecraft] Clock loses time   Matt Zilmer
• [Elecraft] K3/100 - SN 7071 - No output on SSB   Matt Zilmer
• [Elecraft] AA4LR K3/100 - SN 7071 - No output on SSB   Matt Zilmer
• [Elecraft] N-gen question   Matt Zilmer
• [Elecraft] N-gen question   Matt Zilmer
• [Elecraft] Big weakness in Macro's   Matthew Zilmer
• [Elecraft] KX1 power supply   Matthew Zilmer
• [Elecraft] K3EXREF   Matthew Zilmer
• [Elecraft] KUSB Noise Query - K3   Matthew Zilmer
• [Elecraft] K3 key clicks   Matthew Zilmer
• [Elecraft] Why are my messages being cut off at the subject line?   Matthew Zilmer
• [Elecraft] Wall wart for KX3   Matthew Zilmer
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ab2tc
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ab2tc
• [Elecraft] Are you satisfied with your K3?   ab2tc
• [Elecraft] KAT500 remote operation   ab2tc
• [Elecraft] KAT500 remote operation   ab2tc
• [Elecraft] KAT500 remote operation   ab2tc
• [Elecraft] [KAT500] Tuning   ab2tc
• [Elecraft] KAT500 remote operation   ab2tc
• [Elecraft] [KAT500] Tuning   ab2tc
• [Elecraft] Remotely located KAT500 in the ARRL 10m contest   ab2tc
• [Elecraft] [KAT500] Remote KAT500   ab2tc
• [Elecraft] KPA/KAT 500 Firmware 1.18   ab2tc
• [Elecraft] KPA/KAT 500 Firmware 1.18   ab2tc
• [Elecraft] KAT500 tuning help   ab2tc
• [Elecraft] 12 meter band on K3   ab2tc
• [Elecraft] [KAT500] SET F serial command   ab2tc
• [Elecraft] KAT500 a good tuner or great tuner   ab2tc
• [Elecraft] KAT500 a good tuner or great tuner   ab2tc
• [Elecraft] KAT500 a good tuner or great tuner   ab2tc
• [Elecraft] KAT500 LC settings recall -- complete explanation (including auxBus tradeoffs)   ab2tc
• [Elecraft] [KAT500] Remote tuner now at 25F   ab2tc
• [Elecraft] Clock loses time   ab2tc
• [Elecraft] [KAT500] Remote location photos   ab2tc
• [Elecraft] [KAT500]schematic   ab2tc
• [Elecraft] [OT] Re: How Tin-Whiskers Form   aj4tf
• [Elecraft] [K2] VCO Aignment L30   andrew
• [Elecraft] [K2] VCO Aignment L30   andrew
• [Elecraft] KX1 For Sale   AC6JA at aol.com
• [Elecraft] KX1 has sold!   AC6JA at aol.com
• [Elecraft] KPA500 PWR Display   AC6JA at aol.com
• [Elecraft] test   AC6JA at aol.com
• [Elecraft] KPA500 PWR Display   AC6JA at aol.com
• [Elecraft] KX3 battery charge level   Jimk8mr at aol.com
• [Elecraft] KXBC Clock   Jimk8mr at aol.com
• [Elecraft] [KX3] Transverter Band Selection   Jimk8mr at aol.com
• [Elecraft] KX3 Turns Itself On   N4CW at aol.com
• [Elecraft] New Output Power Issue, and a new question   N4CW at aol.com
• [Elecraft] FS K1 SOLD   W2bpi1 at aol.com
• [Elecraft] Power pole connection comes loose   W2bpi1 at aol.com
• [Elecraft] New KX3   W2bpi1 at aol.com
• [Elecraft] Vibroplex   W2bpi1 at aol.com
• [Elecraft] KX3 right anglemic plug   W2bpi1 at aol.com
• [Elecraft] Wall wart for KX3   W2bpi1 at aol.com
• [Elecraft] Fwd: Wall wart for KX3   W2bpi1 at aol.com
• [Elecraft] KXPA100   W2bpi1 at aol.com
• [Elecraft] K3 rig control/CW serial interface   aa4nc at aol.com
• [Elecraft] New P3   jal2257 at aol.com
• [Elecraft] [K3] SO2V?   jpescatore at aol.com
• [Elecraft] Are you satisfied with your K3?   k4tmc at aol.com
• [Elecraft] Reflector postings   khaleio at aol.com
• [Elecraft] KAT-500 LED Brightness   rlvz at aol.com
• [Elecraft] K3 SWR   briana
• [Elecraft] K3 Split in CW   goldtr8 at charter.net
• [Elecraft] K3EXREF   chas
• [Elecraft] missed market   amsctalx at comcast.net
• [Elecraft] K3 Firmware upload elapsed time   n4qs at comcast.net
• [Elecraft] Help configuring N3FJP CW String Selections to K3   w5sg at comcast.net
• [Elecraft] KX3 config menu question   w8zn at comcast.net
• [Elecraft] XV144 - does it power spike   w8zn at comcast.net
• [Elecraft] Just plain WOW!   dan
• [Elecraft] Link to Power Pole connector assembly   david
• [Elecraft] Newly born K3 #7044 lights up and sounds really good!   Black.Curt at epamail.epa.gov
• [Elecraft] KAT500 Tuning issue   george fritkin
• [Elecraft] KAT 500 dissatisfaction   george fritkin
• [Elecraft] Fw: K3 Firmware upload elapsed time   k8cxm at fuse.net
• [Elecraft] Cady book   k8cxm at fuse.net
• [Elecraft] Cady book   k8cxm at fuse.net
• [Elecraft] Cady book   k8cxm at fuse.net
• [Elecraft] Are you satisfied with your K3?   k8cxm at fuse.net
• [Elecraft] Are you satisfied with your K3?   k8cxm at fuse.net
• [Elecraft] My Christmas wish.   bill.va3ol at gmail.com
• [Elecraft] (Elecraft) K3   kd1na363 at gmail.com
• [Elecraft] K3 HRD Ver 6   va3bxg at gmail.com
• [Elecraft] Mail list   va3bxg at gmail.com
• [Elecraft] KX3 Tuning noise   gt-i at gmx.net
• [Elecraft] KX3 Tuning noise   gt-i at gmx.net
• [Elecraft] K2 - Cost estimate for repairs   hawley, charles j jr
• [Elecraft] Power pole connection comes loose   hawley, charles j jr
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   hawley, charles j jr
• [Elecraft] [KAT500] Tune in KAT500 Utility software broken?   hawley, charles j jr
• [Elecraft] Elecraft and Mac OS X   hawley, charles j jr
• [Elecraft] Elecraft and Mac OS X   hawley, charles j jr
• [Elecraft] Link to Power Pole connector assembly   hawley, charles j jr
• [Elecraft] OT: IDIOM PRESS   hawley, charles j jr
• [Elecraft] [KAT500] Cabling Diagram   hawley, charles j jr
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   hawley, charles j jr
• [Elecraft] KAT500 Tuning issue   hawley, charles j jr
• [Elecraft] KAT500 Tuning issue   hawley, charles j jr
• [Elecraft] [KAT500] Tuning   hawley, charles j jr
• [Elecraft] KPA500 presents high SWR to radio driving it   hawley, charles j jr
• [Elecraft] In person, just as email...   hawley, charles j jr
• [Elecraft] missed market   hawley, charles j jr
• [Elecraft] auto tuners   hawley, charles j jr
• [Elecraft] KX3 guestion   hawley, charles j jr
• [Elecraft] [KX3] Begali Adventure Mono arrives in VK   hawley, charles j jr
• [Elecraft] new KPA 500 question   hawley, charles j jr
• [Elecraft] new KPA 500 question   hawley, charles j jr
• [Elecraft] Wall wart for KX3   hawley, charles j jr
• [Elecraft] KPA500 band change mystery SOLVED   hawley, charles j jr
• [Elecraft] [KPA500] latest upgrade   hawley, charles j jr
• [Elecraft] KPA500 band change mystery SOLVED   hawley, charles j jr
• [Elecraft] KPA500 band change mystery SOLVED   hawley, charles j jr
• [Elecraft] New Output Power Issue   hawley, charles j jr
• [Elecraft] K3/KPA500/KAT500 Help   hawley, charles j jr
• [Elecraft] New Output Power Issue   hawley, charles j jr
• [Elecraft] New Output Power Issue   hawley, charles j jr
• [Elecraft] Ham Radio Deluxe works great with my KX3!   hawley, charles j jr
• [Elecraft] K3, A calibration question   hawley, charles j jr
• [Elecraft] [K3] Another K3 (SN 7071) on the air!   hawley, charles j jr
• [Elecraft] KAT500 shipping time?   hawley, charles j jr
• [Elecraft] KX3, APF problem ?   paul hippenmeyer
• [Elecraft] KX3, APF problem ?   paul hippenmeyer
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ik1bxn
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ik1bxn
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ik1bxn
• [Elecraft] KAT 500 my considerations and why not suggestion for the team   ik1bxn
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ik1bxn
• [Elecraft] KAT 500 how to modify Autotune threshold ? Apparently I can't   ik1bxn
• [Elecraft] Getting IF-Output from K1   iw7dmh
• [Elecraft] W2 Wattmeter accuracy at low power   jeffrey741
• [Elecraft] Elecraft Digest, Vol 104, Issue 30   k3hx at juno.com
• [Elecraft] FS: K2 QRP version, SN1322   n5ib at juno.com
• [Elecraft] iSDR app and KX3 not working   Buck k4ia
• [Elecraft] KUSB Noise Query - K3   Buck - k4ia
• [Elecraft] Vibroplex   Buck - k4ia
• [Elecraft] KX1 power supply   edward kacura
• [Elecraft] K3 help   kd9sv
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   ke9uw
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   ke9uw
• [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)   ke9uw
• [Elecraft] K3, A calibration question   ke9uw
• [Elecraft] [WTB] KRC2 Band Decoder   rich kennedy
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Elecraft CW Net Report for December 2nd & 3rd, 2012   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] KXBC Clock   kevinr
• [Elecraft] Elecraft CW Net Report for December 9th & 10th, 2012   kevinr
• [Elecraft] Elecraft CW Net Announcement (tentative)   kevinr
• [Elecraft] Elecraft CW Net Report for December 23rd & 24th, 2012   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] K1 For Sale   kk5na
• [Elecraft] iSDR app and KX3 not working   wb4jfi at knology.net
• [Elecraft] KX3 - KX3PD matching male connector   stan levandowski
• [Elecraft] (OT) Begali "Adventure" Paddle Update   stan levandowski
• [Elecraft] Vibroplex   stan levandowski
• [Elecraft] 10 Watt DX   stan levandowski
• [Elecraft] KFLA3A-1.8K or KFLA3A-2.1K WANTED   m0awn
• [Elecraft] K3 Filters For Sale UK/Europe   m0awn
• [Elecraft] kx3 macbook air programs   william martin
• [Elecraft] Help,advise K3/KPA500 problem   r miles
• [Elecraft] help K3/KPA500   r miles
• [Elecraft] Sub RX Filters choice   mm0gpz
• [Elecraft] Sub RX Filters choice   mm0gpz
• [Elecraft] KAT500 remote operation   n5ge at n5ge.com
• [Elecraft] KPA500 Band Changes   n5ge at n5ge.com
• [Elecraft] K144XV vs XV144   n5ge at n5ge.com
• [Elecraft] KX3 VFO tuning noise...an observation...   zendoc at netspace.net.au
• [Elecraft] KX3 VFO tuning noise...an observation...   zendoc at netspace.net.au
• [Elecraft] KX3 VFO tuning noise...an observation...   zendoc at netspace.net.au
• [Elecraft] Clock loses time   valvetbone at netzero.com
• [Elecraft] [W2] Trade 2kw coupler for 200w HF coupler?   eric norris
• [Elecraft] New Yahoo Group Formed   eric norris
• [Elecraft] KPA500 no longer detects K3 band change with KAT500   eric norris
• [Elecraft] more on strange KPA500 with KAT500 behavior   eric norris
• [Elecraft] KPA500 band change mystery SOLVED   eric norris
• [Elecraft] KPA500 band change mystery SOLVED   eric norris
• [Elecraft] K3-KPA500-KAT500 problem SOLVED Part Deux   eric norris
• [Elecraft] KAT500--a great tuner, or the greatest tuner ever?   eric norris
• [Elecraft] Power pole connection comes loose   nr4c
• [Elecraft] How to APF   nr4c
• [Elecraft] auto tuners   bill ny9h
• [Elecraft] new KPA 500 question   bill ny9h
• [Elecraft] New Output Power Issue, and a new question   bill ny9h
• [Elecraft] New Output Power Issue   Twan at pa0kv.nl
• [Elecraft] KUSB Noise Query - K3   john petters
• [Elecraft] KUSB Noise Query - K3   john petters
• [Elecraft] KUSB Noise Query - K3   john petters
• [Elecraft] KUSB Noise Query - K3   john petters
• [Elecraft] Arm Chair Settings for the K3   keith pitts
• [Elecraft] Preview P3   qrz
• [Elecraft] (no subject)   tony rowland
• [Elecraft] k-3 2 meter   tony rowland
• [Elecraft] K3 100W for sale   mark roz
• [Elecraft] Fw: K3 100W for sale   mark roz
• [Elecraft] missed market   rwm rwmr
• [Elecraft] microphone issue on K3   sp5apw
• [Elecraft] microphone issue on K3   sp5apw
• [Elecraft] K3 100W for sale   tbranton
• [Elecraft] KX3 ACC2settings for Ten Tec 418 amp   tabloid70 at tds.net
• [Elecraft] Small power supply ??   gosier at twcny.rr.com
• [Elecraft] 12 meter band on K3   haircutter at verizon.net
• [Elecraft] Are you satisfied with your K3?   wa5pok
• [Elecraft] Found this on Facebook this morning... KPA800??   wa5pok
• [Elecraft] [K3]Noise Filter (NF) ADJ   wa9fvp
• [Elecraft] KX3 NB - kills the SB suppression   bruce whitney
• [Elecraft] missed market   tnnyswy at yahoo.com
• [Elecraft] New User   tnnyswy at yahoo.com
• [Elecraft] I've been thinking!   tnnyswy at yahoo.com
• [Elecraft] I've been thinking!   tnnyswy at yahoo.com
• [Elecraft] K3 near salt water   tnnyswy at yahoo.com
• [Elecraft] microphone issue on K3   tnnyswy at yahoo.com
• [Elecraft] KPA500 FAN NOISE   zumbruns

Last message date: Mon Dec 31 22:54:30 EST 2012
Archived on: Sat Feb 2 21:16:03 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...