[Elecraft] Sn 7385 build started but wrong resistors supplied on control board.

[Don Wilhelm]

Paul,

The RPaks are configured as individual resistors.  The schematic can 
show you which pins (they are adjacent pairs).

Actually I have not seen a slowdown on the delivery of parts by 1st 
class mail or Priority Mail, so I suggest you contact parts at elecraft.com 
and request the proper parts - you should have them within a few days.

73,
Don W3FPR

On 12/15/2012 8:34 AM, Paul Jackson wrote:
> Hi all started construction of my new K2 last weekend and was amazed at the
> quality of the build instructions and the PCB.
> However on building the control board the resistor packs RP2 and RP4 82K
> Ohms were not in the kit but some 10 legged devices were supplied instead.
> As it's Christmas and the post will be busy I was going to substitute some
> small size 82K resistors for the two resistor packs but I'm not sure how the
> resistor pack pin out is configured.
> Could someone let me know the pin outs for the above resistors please.
> Happy Christmas,
> Paul Jackson
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Sn-7385-build-started-but-wrong-resistors-supplied-on-control-board-tp7567211.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>