[Elecraft] Question

Milt -- N5IA n5ia at zia-connection.com
Mon Dec 31 18:35:52 EST 2012


OK Don.

That is what I had figured out but wanted to know if there was a simpler 
method.  Yeah, the KRX3 has to come out to get at the regulator nuts.  They 
are too tight between the KRX3 and the side panel to do otherwise.  That was 
what had me stumped.  Didn't want to disturb them.  But, it is what it is. 
Now to find the KRX3 manual.  Thanks, and Happy new Year.

de Milt, N5IA


-----Original Message----- 
From: Don Wilhelm
Sent: Monday, December 31, 2012 4:16 PM
To: Milt -- N5IA
Cc: 'Elecraft Mailing List'
Subject: Re: [Elecraft] Question

Milt,

The most direct way is to remove the right side panel.
You will find instructions to do that on page 26 of the KRX3
installation manual.  You will probably have to remove the KRX3 assembly
to gain access to the nuts holding the two regulators to the side panel.

73,
Don W3FPR

On 12/31/2012 5:16 PM, Milt -- N5IA wrote:
> Don and the list,
>
> This is my first time to need any guidance.  I appreciate in advance the 
> reply to my question.
>
> The BNC connector for the AUX RF input has become loose on my K3.
>
> I cannot determine the best manner of accessing the inside of the rear 
> panel so I can tighten the nut on the rear of the connector body.
>
> It has been 4+ years since I have had this radio open and do not remember 
> (nor can I find in the construction manual) the most efficient, least 
> obtrusive method of gaining access to the rear of the connector.
>
> All suggestions are appreciated.
>
> Thanks, and Happy New Year to everyone.
>
> de Milt, N5IA
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2805 / Virus Database: 2637/5975 - Release Date: 12/20/12
> Internal Virus Database is out of date.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/5975 - Release Date: 12/20/12
Internal Virus Database is out of date. 



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2805 / Virus Database: 2637/5975 - Release Date: 12/20/12
Internal Virus Database is out of date.



More information about the Elecraft mailing list