[Elecraft] KAT500 to K3 and KPA500 Cabling

[iain macdonnell - N6ML]

On Tue, Dec 11, 2012 at 12:09 AM, Peter Dent <peterdzl at gmail.com> wrote:
> Can someone please confirm or otherwise that it is possible to use the  *
> E980190*   DB15 Y-Cable in conjunction with the
> *E850463 Optional KAT500 to KPA500 Cable.

Depends what you're trying to do... The Y cable is typically used when
you have some other device (other than the KAT500 and KPA500) that
needs access to the K3's ACC port. The KPA500 should be daisy-chained
off the KAT500, so that the keying line can be interrupted. If the
KAT500 and KPA500 are the only devices needing ACC access, you should
not need a Y - just two cables.

73,

    ~iain / N6ML