[Elecraft] K3 PSK split?

[Joe Subich, W4TV]

K3 works split just fine in DATA A mode.  It is only "PSK from paddles"
(and "FSK from paddles") that do not split.   Have you tried XIT?

73,

    ... Joe, W4TV


On 12/24/2012 9:22 AM, cx7tt at 4email.net wrote:
> Hola,
>
> E51E was running PSK31 the other day on 17m and was sending 'up' for
> split operations...I tried to do this but the rig would not allow split;
> yes I had done A=B to get both VFOs in proper mode and then held down
> the split button....my workaround was to put VFO B up 1 kc, monitor the
> P3 for clear freq and toggle A/B back and forth until I worked him.
>
> Is there a config selection I missed or another 'cockpit error' that I
> did not see?
>
> 73
> Tom
> CX7TT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>