[Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)
iain macdonnell - N6ML
ar at dseven.org
Fri Dec 7 13:31:10 EST 2012
It should be noted that the KAT500 does not "regenerate" the PTT
signal, rather it (only) interrupts it (by opening relay contacts).
Therefore it can't really delay the initial PTT signal going to the
amp... it can only interrupt it as fast as it can, when it detects
high VSWR.
As Gary mentioned, there is newer KPA500 firmware that alleviates the
problem of hard faults when it detects high VSWR before the KAT500 has
time to interrupt the keying line, but it appears that that new KPA500
firmware has not been generally released yet.
73,
~iain / N6ML
On Fri, Dec 7, 2012 at 4:10 AM, Igor Sokolov <ua9cdc at gmail.com> wrote:
> I think what happens is KAT500 needs few msec to determine the operating
> frequency and measure SWR. There is currently no delay between PTT going
> into KAT500 from the radio and PTT going out into the KPA500. These few msec
> is enough for KPA500 to switch itself to fault condition.
> Here programmable PTT delay in KAT500 would be very helpful. Especially so
> with other makes of the amplifiers.
> I have discussed it with Elecraft tech support and they say this feature is
> on their to do list. Lets hope that the next firmware revision of KAT500
> will have that feature implemented.
>
> 73, Igor UA9CDC
>
> ----- Original Message ----- From: "Chris Johnson" <elecraft at ozy.us>
> To: <Elecraft at mailman.qth.net>
> Sent: Friday, December 07, 2012 3:35 PM
> Subject: [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)
>
>
>
>> Hi Guys,
>>
>> I made a video and posted it on youtube to better explain the issue I'm
>> having. Please watch and then reply to it here if you would.
>>
>> Much appreciated
>>
>> http://www.youtube.com/watch?v=QtCPvKKM3_c
>>
>> Chris
>> K6OZY
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list