[Elecraft] K3 Split in CW
KD8NNU
goldtr8 at charter.net
Sat Dec 22 19:13:14 EST 2012
Dear Group,
Thanks for the input, the second tap took care of the problem.
I was never aware of the second tap to send parameters as I usually use
split in SSB and never had a problem.
This reflector is fantastic for sharing information.
Merry Christmas to ALL!!!
~73
Don
KD8NNU
-.- -.. ---.. -. -. ..-
-----Original Message-----
From: Fred Jensen
Sent: Saturday, December 22, 2012 3:31 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Split in CW
On 12/22/2012 11:21 AM, goldtr8 at charter.net wrote:
> I can not get my K3 to TX in split mode for CW.
>
> What is the magic setting, I put it in split mode and change the frq to
> 1k up but it still does TX on RX frequency.
>
> There has to be something simple to do this.
There is:
1. Put VFO A on the DX frequency.
2. Tap A>B *twice* in succession. First tap will put the VFO A
frequency in VFO B. Second tap will put all the other VFO A parameters
[like mode] into VFO B. The K3 won't go into SPLIT mode if the two
VFO's are in different modes.
3. Hold SPLIT. The little TX indicator on the right end of the display
will now point down to "B".
4. Select your TX frequency with VFO B.
It takes way longer to describe it than to do it. You can listen on
your transmit frequency by either holding REV [#2 on the keypad], or
tapping A/B. Holding REV will swap A and B for as long as you hold it,
when you release it, you're back to RX on A and TX on B. Tapping A/B
will reverse the VFO's, tapping A/B again will put them back in normal
split mode.
If you have a P3, both VFO cursors will show up. VFO A is usually on
the left because we almost always split "UP."
Hope this helps
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list