[Elecraft] K3 KPA500 clearance under shelf

[Fred Smith]

It also states in the KAT500 manual that the tuner can be placed on top or
under the KPA500 and also several times here on the reflector.

Fred/N0AZZ

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gary W. Hvizdak
Sent: Saturday, December 15, 2012 12:40 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 KPA500 clearance under shelf

On Fri Dec 14 2012 at 2339 EST, Ron (W3ZV) wrote ...

I am reconfiguring my operating position in anticipation of the arrival of a
KPA500 ...  How much clearance would be needed to provide adequate
ventilation?

--

Ron,

    Per page 15 of the KPA500 Owner's manual ...

Specifications
:
:
Size Enclosure only, 4.0 x 10.8 x 10.0 in., HWD (10.2 x 27.4 x 25.4 cm).
With projections, 4.4 x 10.8 x 11.8 in. (11.2 x 28.4 x 30.0 cm).  The
projections are the bottom feet and the fan and cable connectors on the
rear.  When installing, allow an additional 2" (5.1 cm) behind the fan and
above the top cover for unrestricted air flow.

Reference
http://www.elecraft.com/manual/E740150%20KPA500%20Owner%27s%20man%20%20Rev%2
0C3.pdf

73,
Gary  KI4GGX
K3/100 #2724


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html