[Elecraft] KAT500 Kit Builders

[John_N1JM]

I also had an extra star washer left over. I wonder if the spit washer on
page 18 was supposed to be a star washer? 
Also on screw hole on the front panel had no tape and was painted black. No
big deal. I scraped the paint off around the hole.

73,
John N1JM


Phil Hystad-3 wrote
> To: KAT500 Kit-Builder Guys and Elecraft too...
> 
> 
> According to the parts inventory (as noted on page 34 of Owner's Manual)
> there are supplied four #4 split ring washers (as well as one #8 split
> ring washer).
> 
> Yet, from the assembly instructions, I count the need for FIVE #4 split
> ring washers and as a result I came up one short.  The five are:
> 
>        1.  page 18, figure 11 shows the use of a #4 split washer.
>        2.  And, four more #4 split washers for the Jack screws as
> described on page 25, figure 22.
> 
> Luckily, the spare parts bag has an extra couple of #4 split ring washers
> but I think that either I am wrong somewhere in my above description or
> the inventory parts accounting needs to be updated.
> 
> 73, phil, K7PEH
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html





--
View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-Kit-Builders-tp7566648p7566657.html
Sent from the Elecraft mailing list archive at Nabble.com.