[Elecraft] KX3 offset with transverter

[WW2R Elecraft]

As far as I knew the KX3 supports none of the menu settings that you mention
until Wayne writes the software. They only work in a K3.

Dave

G4FRE

From: Erik Overbye Olsen <la4jga at nrrl.no>
To: elecraft at mailman.qth.net
Subject: [Elecraft] KX3 offset with transverter
Message-ID: <996A3941-91A2-4FF8-9E14-1383E590B532 at nrrl.no>
Content-Type: text/plain;	charset=us-ascii

Hi list

I use the Xv144 transverter together with the KX3
Unfortunately the local oscillator in my XV144 still has an offset on +5KHz
still after the L14 modification
So i want to set the offset from the XV OFS menu in the KX3
I have tried +5KHz and -5KHz but there is no difference in my  readout, it
still show 5Khz to much

My MCU sw is 1.30 and DSP 1.02

Setup on the KX3 is:
XV1 on Yes
XV1 RF 144
XV1 IF 28
XV1 PWR 5
XV1 OFS5.0
XV1 ADR TR1

Ant idea what i may have done wrong?
 
73es de Erik 
la4jga at nrrl.no