[Elecraft] KPA500 faults on first dit at times

[Ken Wagner K3IU]

I suggest you run the TX Gain 
Calibration procedure on the K3. That 
worked for me.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 12/27/2012 8:24 PM, Bill Hammond wrote:
> Seasons Greetings Ellecrafters,
>
> "KPA500 faults on first dit at times"
>
> It doesn't happen all the time and I can't pin down the sequence of events when it happens, the last time was after a band QSY after clicking on a spot in my logging software. I am wondering if others have had issue or have solved the problem.  The fault on the KPA500 is too much drive.  I have the drive adjusted per band and none above 32 watts.  It resets quickly and all is well after the initial fault.  It usually happens once or twice a day.
>
> After bringing the amplifier back on line, all is well.  It just scares me when it happens :)
>
> 73,
> Bill
> AK5X
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>