[Elecraft] KAT500 remote operation

[Eric Swartz WA6HHQ - Elecraft]

Stop tx after the first tune. Then quickly press the tune button on the KAT500 and the immediately go back into TX. That will enter the fine tune mode.

Eric

www.elecraft.com
_..._



On Dec 7, 2012, at 12:09 PM, ab2tc <ab2tc at arrl.net> wrote:

> Hello again,
> 
> I finally managed to get the B&B software to work and I am now in full
> control of the box from the shack using the utility. Wonderful. I tried the
> "fine tune" method to improve the SWR on some 80m frequencies, but don't
> seem to able to make it work. Am I supposed to continue with uninterrupted
> 20W carrier when I click on the tune button again? It never seems to want to
> improve the settings any.
> 
> AB2TC - Knut
> 
> 
> ab2tc wrote
>> Hi all,
>> 
>> I 've got my new KAT500 into my remote location. Unfortunately the
>> software associated with my B&B Ethernet server decided to act up so I
>> have not been able to talk to it. I have temporarily put it in the auto
>> mode and it's mostly working nicely. It did not achieve a very good SWR on
>> some segments of 80m as has been reported by other people. On all other
>> bands I have better than 1.3:1.
>> 
>> AB2TC - Knut
> 
> 
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-remote-operation-tp7566817p7566864.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html