[Elecraft] K2 CW filters

[Don Wilhelm]

Steve,

You can set the width of the K2 filters to whatever you desire. There 
are 4 filter widths for each mode (CW, RTTY, and SSB).  The practical 
most narrow CW bandwidth is 200 Hz.  Usually, at settings more narrow 
than that, the signal is attenuated rather than narrowed.

For additional information on setting the K2 filters, take a look at my 
webpage www.w3fpr.com Step 3 of the K2 Dial Calibration article.

73,
Don W3FPR

On 12/6/2012 9:12 PM, Stephen Roberts wrote:
> Is it possible to get a narrower filter than 400?
>
>
>
>