[Elecraft] KAT500 question

[Don Wilhelm]

Bob,

You could easily turn on XIT and move your frequency up or down a bit, 
then increase power to TUNE (set TUN PWR in the menu)
When it has tuned, clear XIT and you should be good.

73,
Don w3FPR

On 12/24/2012 2:01 PM, KD7YZ Bob wrote:
> On CW or SSB I could try that. With some of these WSJT-Like modes, 
> it's pretty important to be on the same freq u were on, within Hertz; 
> And, call me old, but with about 6 to 10 seconds before the other 
> cycle starts, there isn't a lot of time to QSY and retune.