[Elecraft] K3 rig control/CW serial interface

[iain macdonnell - N6ML]

Will,

Sure. It's called a regular DE9 straight-through serial extension
cable. You probably already have one. The pins in the K3 RS232 port
that would normally be connected to the PC's RTS and DTR outputs can
be used for PTT and CW keying. Search the K3 owner's manual for
"ptt-key".

73,

    ~iain / N6ML




On Sat, Dec 1, 2012 at 1:15 PM,  <aa4nc at aol.com> wrote:
> Is there an interface commercially available that combines CW keying and K3 rig control (from N1MM type software) into a single serial cable?
>
> I think K1NU used to make these for Yaesu radios, but I'm not sure they are available any more.
>
> Thanks/73,
>
> Will AA4NC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html