[Elecraft] KAT500 a good tuner or great tuner

[Don Wilhelm]

LP-Bridge alone will not help.  While K3 Utility can obtain the 
frequency information through LP-Bridge, that information would only be 
sent out the same serial port back to the K3 - nothing gained. Remember 
that the KAT500 uses a different serial connection than does the K3, so 
that data would have to be sent to the KAT500 via a different serial 
port (not connected to the K3).

73,
Don W3FPR

On 12/24/2012 3:00 PM, ab2tc wrote:
> Hello again,
>
> A simpler way that would only involve changes to the KAT500 utility would to
> have the utility talk to both the K3 and the KAT500. Even if the K3 is
> already busy talking to a logging program, LP-Bridge unmodified can fix that
> conflict. So now we have just created more work for Dick.
>
> AB2TC - Knut
>
> PS, Merry Christmas to all.
>
>