[Elecraft] K3 Filters (again???!!) - Many Thanks

Jim Miller JimMiller at STL-OnLine.Net
Sun Dec 16 22:40:54 EST 2012


True Don, Without the second receiver it is pretty much a "nothing" to do
the install.  I have the second receiver too and have added filters twice
since it was installed.  The second time, the 2 meter internal module was
also installed.  Yes, it is not as simple as without additional pieces in
the way but can be done and I didn't see it as anything other than a bit of
a pain to have to remove and reinstall them.  Not something that cannot be
done.

73, de Jim KG0KP

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Sunday, December 16, 2012 5:55 PM
To: PETER HUTCHISON
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Filters (again???!!) - Many Thanks

Peter,

The K3 filters are quite easy to install later - *unless* you have the
KRX3 installed.
If you are considering the subRX as part of your order, then I suggest you
do not install the subRX until you have gotten a handle on the filters that
you will want.  Install those filters and then install the KRX3.  The reason
is entirely physical - the K3 main RX filters are beneath the KRX3, so that
assembly must be removed to add additional filters to the main K3 RX.

73,
Don W3FPR

On 12/16/2012 4:41 PM, PETER HUTCHISON wrote:
> Hi,
> Many thanks to all who responded to my query about which filters to
purchase for WJST modes.
> The replies were varied and all were based on sound argument - ie what
worked best for that particular operator. The consensus of opinion boiled
down to just get the basic filter, see how you get on and if necessary get
others as and when needed. What was interesting was that of all who
expressed an opinion said go for the kit instead of buying it completed
which makes a lot of sense both financially and to learn a little about how
the rig worked.
> I tried to answer all who contacted me but my server refused to send on my
reply to Jim KG0KP who I would like to thank via this medium.
> Here is hoping that Santa works out of season and delivers me a K3 kit
sometime in early 2013!
> Peter G4URT
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




More information about the Elecraft mailing list