[Elecraft] K2 is sick?

[Don Wilhelm]

Mike,

Is the problem restricted to receive?  If so (and if you have the K160RX 
installed), check to see if the RXANT menu is set to ON.

The other possibility is that you have either the K60XV option or the 
Rework Eliminators installed and you have the K2 secondary menu 
parameter for D19 set to "n".  If you do not have either of those 
conditions, it must be set to "n", but if either of those conditions are 
in place, it must be set to "y".

73,
Don W3FPR

On 12/26/2012 2:23 PM, Mike Baird wrote:
> My trusty K2 (#5767) has just started acting up.  It seems to be fine on all
> bands but 40M.  On that band,  the RX seems dead, and won't tune properly
> with my KAT500.  It doesn't have the built in tuner.  The 100W amp is built
> in.  Other bands show full output and normal RX.  Using my other radios have
> ruled out any antenna problem.
>
>