[Elecraft] K3/100 - SN 7071 - No output on SSB

[Matt Zilmer]

Try setting your MIC SEL so that the last character reads 'H' (for
high).

I had the same problem with a Goldline mic a few years back.

73,
matt W6NIA
 
On Mon, 31 Dec 2012 14:12:19 -0500, you wrote:

>OK, I just assembled this rig a few days after Christmas (I have the best XYL ever), and while I've made hundreds of successful CW contacts, I haven't had anyone hear me on SSB.
>
>When TUNE or key on CW, I get the full 100 watt output. 
>
>I believe the microphone works. The VOX trips, I can hear my voice in the monitor, and adjust the ALC and CMP levels easily.
>
>However, when I flip the meter over to SWR / RF and speak, there is only one bar indication on the RF meter. No matter how much I talk / yell into the microphone.
>
>I've been trying to think what might be wrong. I only have the stock 2.7 kHz filter, which I installed at FL3. I have the FLTX SB menu set to FL3. I do not have the rig in TX TEST mode. In TX TEST mode, there is NO bar in the RF meter. 
>
>What have I done wrong?
>
>Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr at arrl.net
>Web: http://boringhamradiopart.blogspot.com
>Quote: "Not within a thousand years will man ever fly!"
>           -- Wilbur Wright, 1901
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html