February 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Feb 1 00:22:25 EST 2013
Ending: Thu Feb 28 23:11:33 EST 2013
Messages: 1150

• [Elecraft] KPA500 Stby flaw in V 1.23?   Rick Bates
  • [Elecraft] [Elecraft_K3] KPA500 Stby flaw in V 1.23?   Richard S. Leary
  • [Elecraft] [Elecraft_K3] KPA500 Stby flaw in V 1.23?   Bill Hammond
    • [Elecraft] [Elecraft_K3] KPA500 Stby flaw in V 1.23?   Rick Bates
• [Elecraft] [OT} Whole House Surge Protection   Jim Brown
• [Elecraft] Looking for KX1 FS   edward kacura
• [Elecraft] K2 Can't hear the sidetone   L. T. Stem
• [Elecraft] FW: KPA500 Stby flaw in V 1.23?   Rick Bates
• [Elecraft] Fwd: Lee's hijacked mail   Mike Rodgers
• [Elecraft] KX3 Charger KXBC3 and alternative power   Richardson Brian
• [Elecraft] OT: 222 & 902 Bands   Edward R Cole
• [Elecraft] [Elecraft_K3] Re: PIN for K3??   Ian White GM3SEK
• [Elecraft] K2 Can't hear the sidetone   ac2fa at yahoo.com
  • [Elecraft] K2 Can't hear the sidetone   Andrew Moore
• [Elecraft] PIN for K3??   Bill W4ZV
• [Elecraft] I finished my K1... Now what?   Paul Roche
  • [Elecraft] I finished my K1... Now what?   Stephen Roberts
    • [Elecraft] I finished my K1... Now what?   Tom McCulloch
  • [Elecraft] I finished my K1... Now what?   David G4DMP
    • [Elecraft] I finished my K1... Now what?   Paul Roche
• [Elecraft] FS KX1 Unbuilt Kit w' Auto Tuner   n6ax at speakeasy.net
  • [Elecraft] FS KX1 Unbuilt Kit w' Auto Tuner   John Klewer
• [Elecraft] K3 on suggestions for improving CW decode   Phil Hystad
• [Elecraft] annoying problem   haircutter at verizon.net
  • [Elecraft] annoying problem   Jim Wiley
    • [Elecraft] annoying problem   Richard Fjeld
    • [Elecraft] annoying problem   Donehrlich at q.com
  • [Elecraft] annoying problem   Vic K2VCO
  • [Elecraft] annoying problem   aj4tf
• [Elecraft] [OT} Whole House Surge Protection   Richard Fjeld
  • [Elecraft] [OT} Whole House Surge Protection   Mark Bayern
    • [Elecraft] [OT} Whole House Surge Protection   Jim Brown
      • [Elecraft] [OT} Whole House Surge Protection   Alan Bloom
      • [Elecraft] [OT} Whole House Surge Protection   Don Wilhelm
      • [Elecraft] [OT} Whole House Surge Protection   Alan Bloom
      • [Elecraft] [OT} Whole House Surge Protection   Alan Bloom
      • [Elecraft] [OT} Whole House Surge Protection   Jim Brown
      • [Elecraft] [OT} Whole House Surge Protection   Jim Brown
  • [Elecraft] [OT} Whole House Surge Protection   AG0N-3055
    • [Elecraft] [OT} Whole House Surge Protection   David Cutter
• [Elecraft] Lost waterfall   Jim Hontoria
• [Elecraft] KXBC3 behavior   Fred Carvalho
  • [Elecraft] KXBC3 behavior   Rich Heineck
• [Elecraft] [OT] I made a knob, a PigKnob.   Nick Garner
  • [Elecraft] [OT] I made a knob, a PigKnob.   Vic K2VCO
    • [Elecraft] [OT] I made a knob, a PigKnob.   David Ferrington, M0XDF
  • [Elecraft] [OT] I made a knob, a PigKnob.   Randy Farmer
  • [Elecraft] [OT] I made a knob, a PigKnob.   Bill Frantz
  • [Elecraft] [OT] I made a knob, a PigKnob.   Gary
    • [Elecraft] [OT] I made a knob, a PigKnob.   Pete Smith N4ZR
      • [Elecraft] [OT] I made a knob, a PigKnob.   Greg
      • [Elecraft] [OT] I made a knob, a PigKnob.   Nick Garner
• [Elecraft] K3 Keyer speed?   John Oppenheimer
  • [Elecraft] K3 Keyer speed?   Jim Miller
• [Elecraft] K3 Atennuator   Mike Sanders
  • [Elecraft] K3 Atennuator   Mike K2MK
    • [Elecraft] K3 Atennuator   Ron D'Eau Claire
      • [Elecraft] K3 Atennuator   John Lemay
• [Elecraft] [K3 - K144XV] frequency offset???   Oliver Dröse
• [Elecraft] K3 auto notch = N/A   Gary Smith
• [Elecraft] K3 auto notch = N/A   Gary Smith
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
  • [Elecraft] [OT} Whole House Surge Protection   qrv at kd4e.com
  • [Elecraft] [OT} Whole House Surge Protection   Dr. William J. Schmidt, II
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] K3 mode icon question   W9HAK
  • [Elecraft] K3 mode icon question   Rick Prather
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] (no subject)   Erik Basilier
• [Elecraft] [OT} Whole House Surge Protection   Erik Basilier
• [Elecraft] No autotune on FSK-D   Stephen Prior
  • [Elecraft] No autotune on FSK-D   Lyle Johnson
• [Elecraft] [K3] attenuator   Mike Rodgers
• [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
  • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
  • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
    • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30 - Solved!   JeremyJones
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30 - Solved!   Bill Frantz
      • [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
• [Elecraft] K3 DVK and N1MM Set-up   Bill - W4RM
  • [Elecraft] K3 DVK and N1MM Set-up   Jim McDonald
  • [Elecraft] K3 DVK and N1MM Set-up   Pete Smith N4ZR
  • [Elecraft] K3 DVK and N1MM Set-up   Bill - W4RM
• [Elecraft] rf interference on smoke detector   haircutter at verizon.net
  • [Elecraft] rf interference on smoke detector   Dale Putnam
  • [Elecraft] rf interference on smoke detector   Ron D'Eau Claire
• [Elecraft] LogiKit CMOS-4 keyer FS   Mike Weir
  • [Elecraft] LogiKit CMOS-4 keyer FS   VE3WDM
• [Elecraft] [OT] SurgeX Power Pro DS-PP Surge Protector   Lee Trout
  • [Elecraft] [OT] SurgeX Power Pro DS-PP Surge Protector   Jim Brown
• [Elecraft] K2 VCO Alignment only 0.02V @ R30   Don Wilhelm
• [Elecraft] roofing filter   Scott W2NTV
• [Elecraft] Part number for keypad for P3 panadaptor   vk5bm
  • [Elecraft] Part number for keypad for P3 panadaptor   Don Wilhelm
    • [Elecraft] Part number for keypad for P3 panadaptor   vk5bm
• [Elecraft] Elecraft SSB net announcement   Phil Shepard
  • [Elecraft] Elecraft SSB net announcement   Phil Shepard
    • [Elecraft] Elecraft SSB net announcement/results   Phil Shepard
      • [Elecraft] Elecraft SSB net results (2/17/13)   Phil Shepard
• [Elecraft] K3: vs a Collins S-line RX   Bill Clarke
  • [Elecraft] K3: vs a Collins S-line RX   Fred Smith
• [Elecraft] K3: vs a Collins S-line RX   stan levandowski
  • [Elecraft] K3: vs a Collins S-line RX   tnnyswy at yahoo.com
    • [Elecraft] K3: vs a Collins S-line RX   Dale Putnam
      • [Elecraft] K3: vs a Collins S-line RX   Jim Lowman
    • [Elecraft] K3: vs a Collins S-line RX   Phil Kane
      • [Elecraft] K3: vs a Collins S-line RX   Philip Townsend Lontz
      • [Elecraft] K3: vs a Collins S-line RX   Don Wilhelm
      • [Elecraft] K3: vs a Collins S-line RX   Ne2i at optonline.net
  • [Elecraft] K3: vs a Collins S-line RX   Fred Jensen
• [Elecraft] Q   stan levandowski
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Digest Vol 106, Issue 3 = Treasure trove   cx7tt at 4email.net
• [Elecraft] unsubscribe 197QP7 w3vgted at gmail.com   Ted Leonard
• [Elecraft] KTCXO3-1 TCXO   Chad Wasinger
  • [Elecraft] KTCXO3-1 TCXO   Matt Zilmer
• [Elecraft] KTCXO3-1 TCXO warm up time to stabilize   DeYoung James
• [Elecraft] KTCXO3-1 TCXO   Edward R Cole
  • [Elecraft] KTCXO3-1 TCXO   Chad Wasinger
    • [Elecraft] KTCXO3-1 TCXO   Chad Wasinger
• [Elecraft] K3: vs a Collins S-line RX   Erik Basilier
  • [Elecraft] K3: vs a Collins S-line RX   david Moes
• [Elecraft] unsubscribe 197QP7 w3vgted at gmail.com   Ted Leonard
• [Elecraft] 2013 Visalia Top Band Dinner   wb6rse1 at mac.com
• [Elecraft] K3 - ACC Connector - Band0-3 output indicator   N2TK, Tony
• [Elecraft] (no subject)   Tony Read
• [Elecraft] P3 rubber button   Brenton Meadows
  • [Elecraft] P3 rubber button   Fred Jensen
    • [Elecraft] P3 rubber button   Alan Bloom
  • [Elecraft] P3 rubber button   Mike Reublin
    • [Elecraft] P3 rubber button   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] XV432 - No intermediate pwr output   Tom Warren
  • [Elecraft] XV432 - No intermediate pwr output   Don Wilhelm
  • [Elecraft] XV432 - No intermediate pwr output   M Cresap
    • [Elecraft] XV432 - No intermediate pwr output   Johnny Siu
• [Elecraft] Mailing list adjustment and FS item   Paul
  • [Elecraft] Mailing list adjustment and FS item   Don Wilhelm
  • [Elecraft] Mailing list adjustment and FS item   John_N1JM
• [Elecraft] K3 auto tuner   W9HAK
  • [Elecraft] K3 auto tuner   Don Wilhelm
  • [Elecraft] K3 auto tuner   Ron D'Eau Claire
    • [Elecraft] K3 auto tuner   W9HAK
• [Elecraft] K3 - RF Board - C238 - AGC change   N2TK, Tony
  • [Elecraft] K3 - RF Board - C238 - AGC change   Wayne Burdick
    • [Elecraft] K3 - RF Board - C238 - AGC change   N2TK, Tony
• [Elecraft] KX3 Beta 1.36 testing   W2bpi1 at aol.com
  • [Elecraft] KX3 Beta 1.36 testing   Jim Sheldon
    • [Elecraft] KX3 Beta 1.36 testing   N1EU
      • [Elecraft] [KX3] and RMS Express, Winlink.   Gil G.
      • [Elecraft] [KX3] and RMS Express, Winlink.   Dave Lindsley
      • [Elecraft] [KX3] and RMS Express, Winlink.   Don Wilhelm
      • [Elecraft] [KX3] and RMS Express, Winlink.   Matthew Zilmer
      • [Elecraft] [KX3] and RMS Express, Winlink.   K7JLTextra
      • [Elecraft] [KX3] and RMS Express, Winlink.   George Cortez Jr
      • [Elecraft] [KX3] and RMS Express, Winlink.   Gil G.
• [Elecraft] K1 amp keying circuit   Dennis Rayfield
  • [Elecraft] K1 amp keying circuit   Don Wilhelm
    • [Elecraft] K1 amp keying circuit   Dennis Rayfield
      • [Elecraft] K1 amp keying circuit   Don Wilhelm
• [Elecraft] KX1 FS: KX1 professionally assembled   k7nhb
• [Elecraft] [K3} [KX3] SSBT like CWT ?   Erik Basilier
  • [Elecraft] [K3} [KX3] SSBT like CWT ?   Peter Lambert
    • [Elecraft] [K3} [KX3] SSBT like CWT ?   Wright, Robert
      • [Elecraft] [K3} [KX3] SSBT like CWT ?   Gary Gregory
      • [Elecraft] [K3} [KX3] SSBT like CWT ?   Peter Lambert
      • [Elecraft] [K3} [KX3] SSBT like CWT ?   Ron D'Eau Claire
    • [Elecraft] [K3} [KX3] SSBT like CWT ?   Lyle Johnson
  • [Elecraft] [K3} [KX3] SSBT like CWT ?   Gary Gregory
• [Elecraft] KX3 command Visual index   SHIBUYA SHINTARO
  • [Elecraft] KX3 command Visual index   Dave Lindsley
  • [Elecraft] KX3 command Visual index   Nels Nelsen
• [Elecraft] W2 and K2, SWR display fine in CW, off in SSB   Andreas Hofmann
• [Elecraft] [K3} [KX3] SSBT like CWT ?   Erik Basilier
  • [Elecraft] [K3} [KX3] SSBT like CWT ?   Peter Lambert
    • [Elecraft] [K3} [KX3] SSBT like CWT ?   Eduardo González
• [Elecraft] RX ANT PORT   Mike Greenway
  • [Elecraft] RX ANT PORT   Al Lorona
• [Elecraft] K3 - RF Board - C238 - AGC change   Andrew Catanzaro
  • [Elecraft] K3 - RF Board - C238 - AGC change   N2TK, Tony
• [Elecraft] [K3} [KX3] SSBT like CWT ?   C L Jonkers
  • [Elecraft] [K3} [KX3] SSBT like CWT ?   Fred Smith
• [Elecraft] Remote radio   va3bxg at gmail.com
• [Elecraft] Info on front panel LEDs   Dale Huffington
  • [Elecraft] Info on front panel LEDs   Matthew Zilmer
• [Elecraft] K3; multiple macros   Richard Fjeld
• No subject  
• [Elecraft] Elecraft SSB Net results (2/3/13)   Phil Shepard
  • [Elecraft] Elecraft SSB Net results (2/3/13)   Phil Shepard
    • [Elecraft] QSL software for Macs   Phil Shepard
      • [Elecraft] QSL software for Macs   Bill Frantz
      • [Elecraft] QSL software for Macs   va3bxg at gmail.com
      • [Elecraft] QSL software for Macs   Peter N. Spotts
      • [Elecraft] QSL software for Macs   Lewis Phelps
      • [Elecraft] QSL software for Macs   Oliver Johns
• [Elecraft] KXBC3 behavior   Fred Carvalho
  • [Elecraft] KXBC3 behavior   Peter Lambert
• [Elecraft] KXAT3 Internal Antenna Tuner Question   Fred Carvalho
  • [Elecraft] KXAT3 Internal Antenna Tuner Question   Don Wilhelm
    • [Elecraft] KXAT3 Internal Antenna Tuner Question   Don Wilhelm
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Matthew Zilmer
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Don Wilhelm
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Matt Zilmer
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Michael Adams
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   WM3M
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Matt Zilmer
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   Michael Adams
      • [Elecraft] KXAT3 Internal Antenna Tuner Question   NZ9E
• [Elecraft] [K3} [KX3] SSBT like CWT ?   Ron D'Eau Claire
• [Elecraft] P3 rubber button   Brenton Meadows
  • [Elecraft] P3 rubber button   Brenton Meadows
    • [Elecraft] P3 rubber button   Fred Smith
      • [Elecraft] P3 rubber button   Brenton Meadows
  • [Elecraft] P3 rubber button   Fred Smith
    • [Elecraft] P3 rubber button   Brenton Meadows
      • [Elecraft] P3 rubber button   Fred Smith
• [Elecraft] KX3 Backpack Recommendations   k7nhb
  • [Elecraft] KX3 Backpack Recommendations   david Moes
• [Elecraft] Price Increase this Friday - Finally   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] K3 "beep" reason?   AB3EN
• [Elecraft] K2/100 - "Info 080" message   Tom Warren
  • [Elecraft] K2/100 - "Info 080" message   Don Wilhelm
    • [Elecraft] K2/100 - "Info 080" message   Brian Lodahl OZ2BRN
• [Elecraft] ---posting   Guess who ???
  • [Elecraft] ---posting   tnnyswy at yahoo.com
• [Elecraft] FS: [K3] 400 Hz 8-pole filter   George Dubovsky
  • [Elecraft] FS: [K3] 400 Hz 8-pole filter   George Dubovsky
• [Elecraft] KRC2 Modified Firmware?   Craig - AE6RR
  • [Elecraft] KRC2 Modified Firmware?   Jack Brindle
    • [Elecraft] KRC2 Modified Firmware?   Craig - AE6RR
      • [Elecraft] KRC2 Modified Firmware?   Jack Brindle
      • [Elecraft] KRC2 Modified Firmware?   Craig - AE6RR
• [Elecraft] Elecraft SSB Net results (2/3/13)   Edward R Cole
• [Elecraft] How to search the archives ?   Tom Warren
  • [Elecraft] How to search the archives ?   Mike Reublin
• [Elecraft] External Sequencer / Amplifier Keying   Kevin Hobbs
• [Elecraft] Kx3 beta 1.36 16khz IF image nulling   Mark
• [Elecraft] K2: Looking for station mike   Andreas Hofmann
  • [Elecraft] K2: Looking for station mike   Don Wilhelm
  • [Elecraft] K2: Looking for station mike   wa5pok
• [Elecraft] Battery Charger, Real Time Clock installed   Michael E. Califf,Sr
  • [Elecraft] Battery Charger, Real Time Clock installed   Matt Zilmer
• [Elecraft] [KX3] Six meters?   Ken G Kopp
  • [Elecraft] [KX3] Six meters?   Eugene Balinski
• [Elecraft] W2 meter wanted   Armand Bakalian
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [Elecraft] K3 Firmware program and Virtual serial port   Brian Alsop
  • [Elecraft] K3 Firmware program and Virtual serial port   Lyle Johnson
    • [Elecraft] K3 Firmware program and Virtual serial port   Joe Subich, W4TV
• [Elecraft] K3 Mic.   K5HM
  • [Elecraft] K3 Mic.   Matt Zilmer
    • [Elecraft] K3 Mic.   K5HM
  • [Elecraft] K3 Mic.   Don Wilhelm
• [Elecraft] Using SB 200 With KX-3   Ken Schillinger
  • [Elecraft] Using SB 200 With KX-3   Walter Underwood
    • [Elecraft] Using SB 200 With KX-3   Carey Magee
    • [Elecraft] Using SB 200 With KX-3   Ken Schillinger
  • [Elecraft] Using SB 200 With KX-3   Alan Bloom
• [Elecraft] Reducing K2 power below 1 watt (QRPp)   andyatd
  • [Elecraft] Reducing K2 power below 1 watt (QRPp)   Tom McCulloch
    • [Elecraft] Reducing K2 power below 1 watt (QRPp)   Fred Smith
  • [Elecraft] Reducing K2 power below 1 watt (QRPp)   Chip Stratton
  • [Elecraft] Reducing K2 power below 1 watt (QRPp)   Lou Voerman W2ROW
  • [Elecraft] Reducing K2 power below 1 watt (QRPp)   Don Wilhelm
    • [Elecraft] Reducing K2 power below 1 watt (QRPp)   andyatd
• [Elecraft] Reducing K2 power below 1 watt   Chris Derr
• [Elecraft] K3/microKeyerII/HRD   Ray Coles
• [Elecraft] [K3} NB and Sub-rx   t.izak
  • [Elecraft] [K3} NB and Sub-rx   Matthew Zilmer
    • [Elecraft] [K3} NB and Sub-rx   Matthew Zilmer
      • [Elecraft] [K3} NB and Sub-rx   Mike K2MK
      • [Elecraft] [K3} NB and Sub-rx   Matthew Zilmer
• [Elecraft] External Sequencer / Amplifier Keying   Edward R Cole
• [Elecraft] For Sale- Elecraft KPA100 & KAT100   abell
• [Elecraft] Using SB 200 with KX-3   N4CW at aol.com
  • [Elecraft] Using SB 200 with KX-3   iain macdonnell - N6ML
• [Elecraft] P3-Fixed-tune mode anomaly   Fred Jensen
  • [Elecraft] P3-Fixed-tune mode anomaly   Alan Bloom
    • [Elecraft] P3-Fixed-tune mode anomaly   Fred Jensen
• [Elecraft] KX3 with external coupler   Rick Robinson
  • [Elecraft] KX3 with external coupler   Ron D'Eau Claire
  • [Elecraft] KX3 with external coupler   Rick Dettinger
  • [Elecraft] KX3 with external coupler   k3ndm at comcast.net
• [Elecraft] Kx3 for sale   Luther Stave
  • [Elecraft] Kx3 for sale   Rick Robinson
• [Elecraft] macro with a serial number   BILL
• [Elecraft] Nifty stand for KX3   Rick Robinson
  • [Elecraft] Nifty stand for KX3   hawley, charles j jr
    • [Elecraft] Nifty stand for KX3   Fred Smith
      • [Elecraft] Nifty stand for KX3   Victor Brodeur
      • [Elecraft] Nifty stand for KX3   Dave Lindsley
    • [Elecraft] Nifty stand for KX3   Richard Gillingham
      • [Elecraft] Nifty stand for KX3   Terry Schieler
      • [Elecraft] Nifty stand for KX3   Dave Lindsley
      • [Elecraft] Nifty stand for KX3   Dave Lindsley
• [Elecraft] VK3 Hamfest   Gary Gregory
• [Elecraft] KX3 Stand   Fred Smith
  • [Elecraft] KX3 Stand   Rick Robinson
    • [Elecraft] KX3 Stand   Reginald J Mackey SR
• [Elecraft] Nifty Stand   P.J.Hicks
• [Elecraft] Paddle Keyer and PTT   KD7YZ Bob
  • [Elecraft] Paddle Keyer and PTT   Cady, Fred
    • [Elecraft] Paddle Keyer and PTT   Greg
      • [Elecraft] Paddle Keyer and PTT   Greg
• [Elecraft] [K*] Hooks into the RTOS for an API   Bill Coleman
  • [Elecraft] [K*] Hooks into the RTOS for an API   Tom H Childers
• [Elecraft] NAQCC Sprint Tuesday night!   NAQCC
• [Elecraft] Kx3 for sale   Luther Stave
• [Elecraft] KAT1 installation   Philipp Kaysser, DK3IP
  • [Elecraft] KAT1 installation   hawley, charles j jr
• [Elecraft] KAT1 installation   Philipp Kaysser, DK3IP
• [Elecraft] KX3 command Visual index   SHIBUYA SHINTARO
• [Elecraft] KX3 DVR   Pete Meier
  • [Elecraft] KX3 DVR   Lyle Johnson
    • [Elecraft] KX3 DVR - glich?   Dominic Baines
• [Elecraft] K3 Owner's Manual - MIC SEL Erratum?   Geoffrey Downs
• [Elecraft] OT - FS, Mint ACOM 1000   Terry Schieler
• [Elecraft] K3 / N1MM & PTT footswitch for ESM   Bill - W4RM
  • [Elecraft] K3 / N1MM & PTT footswitch for ESM   Don Wilhelm
• [Elecraft] RF Gain Calibration Issue   Dan Sherwood
• [Elecraft] K3 / N1MM & PTT footswitch for ESM   Richard Ferch
• [Elecraft] Hi   Robert Mccormack
• [Elecraft] K3 panel LEDs/LCDs gone dark   Dale Huffington
• [Elecraft] RF Gain Calibration Issue   Dan Sherwood
• [Elecraft] KPA500 - Rx Attenuation   John K3TN
  • [Elecraft] KPA500 - Rx Attenuation   AG0N-3055
    • [Elecraft] KPA500 - Rx Attenuation   Dick Dievendorff
      • [Elecraft] KPA500 - Rx Attenuation   jpescatore at aol.com
      • [Elecraft] KPA500 - Rx Attenuation   iain macdonnell - N6ML
      • [Elecraft] KPA500 - Rx Attenuation   W0MU Mike Fatchett
    • [Elecraft] KPA500 - Rx Attenuation   AG0N-3055
      • [Elecraft] KPA500 - Rx Attenuation   Eric Swartz WA6HHQ - Elecraft
      • [Elecraft] KPA500 - Rx Attenuation   Rick Robinson
      • [Elecraft] KPA500 - Rx Attenuation   Don Wilhelm
      • [Elecraft] KPA500 - Rx Attenuation   Rick Robinson
      • [Elecraft] KPA500 - Rx Attenuation   Ron D'Eau Claire
      • [Elecraft] KPA500 - Rx Attenuation   AG0N-3055
      • [Elecraft] [K3] Trouble TX on RTTY   Doug Turnbull
      • [Elecraft] [K3] Trouble TX on RTTY   Doug Turnbull
      • [Elecraft] [K3] Trouble TX on RTTY   Dick Dievendorff
• [Elecraft] Elecraft CW Net Report for January 27th & 28th, 2013 + February 3rd & 4th, 2013   kevinr
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] Elecraft USB interface.   Gil G.
  • [Elecraft] Elecraft USB interface.   W4GRJ
    • [Elecraft] Elecraft USB interface.   Gil G.
      • [Elecraft] Elecraft USB interface.   Joel Black
      • [Elecraft] Elecraft USB interface.   Jeff Herr
      • [Elecraft] Elecraft USB interface.   Don Wilhelm
      • [Elecraft] Elecraft USB interface.   Don Pomplun
      • [Elecraft] Elecraft USB interface.   W4GRJ
      • [Elecraft] Elecraft USB interface.   K4ia
      • [Elecraft] Elecraft USB interface.   Phil LaMarche
      • [Elecraft] Elecraft USB interface.   Walter Underwood
      • [Elecraft] Elecraft USB interface.   Joe Subich, W4TV
      • [Elecraft] Elecraft USB interface.   Walter Underwood
      • [Elecraft] Elecraft USB interface.   Bill Frantz
      • [Elecraft] Elecraft USB interface.   Don Wilhelm
      • [Elecraft] Elecraft USB interface.   Bill Frantz
      • [Elecraft] Elecraft USB interface.   Don Wilhelm
      • [Elecraft] Elecraft USB interface   Ray Sills
      • [Elecraft] Elecraft USB interface   Julian, G4ILO
      • [Elecraft] Elecraft USB interface   Dave Lindsley
      • [Elecraft] Elecraft USB interface   WS5K
• [Elecraft] Can I switch between Operate/Standby from the K3?   RANDY DIDDEL
  • [Elecraft] Can I switch between Operate/Standby from the K3?   Barry
• [Elecraft] Elecraft USB interface. Signal Link   Phil LaMarche
• [Elecraft] Unusual P3 behavior ?   Phil Hystad
  • [Elecraft] Unusual P3 behavior ?   Don Wilhelm
    • [Elecraft] Unusual P3 behavior ?   Nate Bargmann
      • [Elecraft] Unusual P3 behavior ?   K7MDL
      • [Elecraft] Unusual P3 behavior ?   Bill Hammond
• [Elecraft] K3EXREF Experience   Chad Wasinger
• [Elecraft] P3 generates noise on 144 MHz   Roger Crofts
  • [Elecraft] P3 generates noise on 144 MHz   K7MDL
  • [Elecraft] P3 generates noise on 144 MHz   David G4DMP
  • [Elecraft] P3 generates noise on 144 MHz   Tim Hague
    • [Elecraft] P3 generates noise on 144 MHz   Stephen Prior
• [Elecraft] Unusual P3 behavior ?   Phil Hystad
• [Elecraft] [K3] Custom 700 Hz 8-Pole Filters   Gary W. Hvizdak
• [Elecraft] Norm1 and Norm2 how to switch between them???   Ron Midwin
  • [Elecraft] Norm1 and Norm2 how to switch between them???   Tom H Childers
    • [Elecraft] Norm1 and Norm2 how to switch between them???   Tom H Childers
    • [Elecraft] Norm1 and Norm2 how to switch between them???   Tom H Childers
      • [Elecraft] Norm1 and Norm2 how to switch between them???   Fred Jensen
  • [Elecraft] Norm1 and Norm2 how to switch between them???   David Ferrington, M0XDF
• [Elecraft] Can I switch between Operate/Standby from the K3?   RANDY DIDDEL
  • [Elecraft] Can I switch between Operate/Standby from the K3?   iain macdonnell - N6ML
• [Elecraft] Sub Recevier muted?   K5HM
• [Elecraft] (fwd) Re: Can I switch between Operate/Standby from the K3?   AG0N-3055
  • [Elecraft] (fwd) Re: Can I switch between Operate/Standby from the K3?   Bill Hammond
• [Elecraft] Sub Recevier muted?   K5HM
• [Elecraft] P3: Enabling SVGA makes display jerky when using narrow span   Stephen Prior
  • [Elecraft] P3: Enabling SVGA makes display jerky when using narrow span   Paul Saffren N6HZ
• [Elecraft] K3/10 For Sale   Tim Goldenburg
• [Elecraft] OT - FS, Mint ACOM 1000 -SOLD-   Terry Schieler
• [Elecraft] P3 generates noise on 144 MHz   Roger Crofts
  • [Elecraft] P3 generates noise on 144 MHz   John Lemay
• [Elecraft] K3, KPA500, KAT500 for sale.   Luther Stave
• [Elecraft] OT: FS: Trimble Thunderbolt GPS Disciplined Oscillator   Jim Sheldon
  • [Elecraft] SOLD FS: Trimble Thunderbolt GPS Disciplined Oscillator   Jim Sheldon
    • [Elecraft] kpa 500.... to disassemble or not ?   bill steffey NY9H
• [Elecraft] kpa 500.... to disassemble or not ?   Edward Dickinson III
  • [Elecraft] K3 Trouble transmitting on RTTY   Doug Turnbull
    • [Elecraft] K3 Trouble transmitting on RTTY   Greg
• [Elecraft] kpa 500.... to disassemble or not ?   bill steffey NY9H
• [Elecraft] K2 and RTTY - a few questions   Andy, KU7T
  • [Elecraft] K2 and RTTY - a few questions   Don Wilhelm
    • [Elecraft] K2 and RTTY - a few questions   Bill Coleman
  • [Elecraft] K2 and RTTY - a few questions   Bill Coleman
• [Elecraft] OT P3 look at a 18 meter intruder   Bill Hammond
  • [Elecraft] OT P3 look at a 18 meter intruder   Al Lorona
• [Elecraft] Using NORM 1&2 for K3 Bandwidth settings of Filters and DSP in each mode except FM   John Lawrence
  • [Elecraft] Using NORM 1&2 for K3 Bandwidth settings of Filters and DSP in each mode except FM   Fred Jensen
• [Elecraft] A Plexiglas front cap for the KX3   Ken G Kopp
• [Elecraft] K3 won't shut off, turns on by itself   Dave New, N8SBE
• [Elecraft] No resopnse on config menu   Dave New, N8SBE
• [Elecraft] OT: TX5K on 6m - February 12 UPDATE   Lance Collister, W7GJ
• [Elecraft] P3 generates noise on 144MHz   Roger Crofts
• [Elecraft] KBPF3 General Coverage Receive Option Questions   David and Dianne on Comcast
  • [Elecraft] KBPF3 General Coverage Receive Option Questions   Don Wilhelm
  • [Elecraft] KBPF3 General Coverage Receive Option Questions   kg7vq
    • [Elecraft] KBPF3 General Coverage Receive Option Questions   Fred Smith
• [Elecraft] Another KPA500 RX attenuation   K9IR
• [Elecraft] K3 Reduced BW FSK   Mark
  • [Elecraft] K3 Reduced BW FSK   Stephen Prior
    • [Elecraft] K3 Reduced BW FSK   Mark n2qt
      • [Elecraft] K3 Reduced BW FSK   Gary Gregory
      • [Elecraft] K3 Reduced BW FSK   Jim Brown
      • [Elecraft] K3 Reduced BW FSK   Joe Subich, W4TV
      • [Elecraft] K3 Reduced BW FSK   Gary Gregory
      • [Elecraft] K3 Reduced BW FSK   Ken Chandler
• [Elecraft] Problem turning KX3 on   Klaus-Dieter Graef
  • [Elecraft] Problem turning KX3 on   Peter Eijlander (PA0PJE)
• [Elecraft] K3XREF Question   KD7YZ Bob
  • [Elecraft] K3XREF Question   Don Wilhelm
    • [Elecraft] K3XREF Question   Stewart Bryant
  • [Elecraft] K3XREF Question   Matthew Zilmer
    • [Elecraft] K3XREF Question   KD7YZ Bob
• [Elecraft] The connector below the front panel   Stewart Bryant
  • [Elecraft] The connector below the front panel   Greg
    • [Elecraft] The connector below the front panel   Gary Hinson
  • [Elecraft] The connector below the front panel   D Joyce
• [Elecraft] Laptops/Notebook suggestions   Stephen Roberts
  • [Elecraft] Laptops/Notebook suggestions   Rick Prather
  • [Elecraft] Laptops/Notebook suggestions   Tony Estep
  • [Elecraft] Laptops/Notebook suggestions   Mike Reublin
  • [Elecraft] Laptops/Notebook suggestions   geoff allsup
• [Elecraft] Wanted: PR6 Low Noise 6m GaAs FET Preamp   Chad Wasinger
• [Elecraft] K3 RF gain "kicks in" rather than smooth increase   Stan AE7UT
  • [Elecraft] K3 RF gain "kicks in" rather than smooth increase   Don Wilhelm
  • [Elecraft] K3 RF gain "kicks in" rather than smooth increase   Dale Boresz
  • [Elecraft] K3 RF gain "kicks in" rather than smooth increase   Stan AE7UT
• [Elecraft] K2 tuner and G5RV   Paul and Sue Huff
  • [Elecraft] K2 tuner and G5RV   Gerald Manthey
    • [Elecraft] K2 tuner and G5RV   Ariel Jacala
      • [Elecraft] K2 tuner and G5RV   Gary Gregory
      • [Elecraft] K2 tuner and G5RV   Don Wilhelm
      • [Elecraft] K2 tuner and G5RV   Philip Townsend Lontz
      • [Elecraft] K2 tuner and G5RV   Brian Alsop
      • [Elecraft] K2 tuner and G5RV   Gary Gregory
  • [Elecraft] K2 tuner and G5RV   W4GRJ
• [Elecraft] OT: G5RV's and variants   Ken G Kopp
  • [Elecraft] OT: G5RV's and variants   k3ndm at comcast.net
    • [Elecraft] OT: G5RV's and variants   Ron D'Eau Claire
      • [Elecraft] OT: G5RV's and variants   Barry LaZar
  • [Elecraft] OT: G5RV's and variants   Terry Schieler
    • [Elecraft] OT: G5RV's and variants   Elecraft K3
      • [Elecraft] OT: G5RV's and variants   hawley, charles j jr
      • [Elecraft] OT: G5RV's and variants   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] OT: G5RV's and variants   Tom H Childers
      • [Elecraft] OT: G5RV's and variants   Don Wilhelm
      • [Elecraft] OT: G5RV's and variants   David Cutter
      • [Elecraft] OT: G5RV's and variants   Dale Putnam
  • [Elecraft] OT: G5RV's and variants   EMD
• [Elecraft] [KX3] Speakers + Phones   Cady, Fred
  • [Elecraft] [KX3] Speakers + Phones   Jim Rhodes
    • [Elecraft] [KX3] Speakers + Phones   K7JLTextra
      • [Elecraft] [KX3] Speakers + Phones   Jim Rhodes
• [Elecraft] K144XV Problem   Doug Wetzel
  • [Elecraft] K144XV Problem   K7MDL
• [Elecraft] KX3 Two Meter Module   DBellW6AQ at aol.com
  • [Elecraft] KX3 Two Meter Module   Wayne Burdick
    • [Elecraft] KX3 Two Meter Module   Lance Collister, W7GJ
      • [Elecraft] KX3 Two Meter Module   Wayne Burdick
• [Elecraft] K2 and SteppIR - SDA 100 Controller frequency jumps around just if VFO A and VFO B are different   Andreas Hofmann
• [Elecraft] KX3 Two Meter Module (All Mode?)   Ken Schillinger
  • [Elecraft] KX3 Two Meter Module (All Mode?)   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] KX3 Two Meter Module (All Mode?)   Phil Hystad
• [Elecraft] (Elecraft) Laptops/Notebook Suggestions   zumbruns
• [Elecraft] KBPF3 General Coverage Receive Option Questions   Edward R Cole
• [Elecraft] K3XREF Question   Edward R Cole
• [Elecraft] Laptops & Notebooks   Robert Biamonte
• [Elecraft] [K2] KAT2 Question   Brian Handy
  • [Elecraft] [K2] KAT2 Question   Don Wilhelm
• [Elecraft] K3 with 2m module K144XV   Lance Collister, W7GJ
• [Elecraft] Elecraft: K2/100 for sale, UK   Martin Evans
  • [Elecraft] Elecraft: K2/100 for sale, UK   Martin Evans
• [Elecraft] Morse in the Hair   Ron D'Eau Claire
  • [Elecraft] Morse in the Hair   Carey Magee
• [Elecraft] K3 with 2m module K144XV   Edward R Cole
  • [Elecraft] K3 with 2m module K144XV   K7MDL
• [Elecraft] K2 Micro Manual Available in Apple App Store   Michael Downs
  • [Elecraft] K2 Micro Manual Available in Apple App Store   Gil G.
• [Elecraft] KE7X K3 book   Cady, Fred
  • [Elecraft] KE7X K3 book   Fred Smith
• [Elecraft] K3 with 2m module K144XV   WW2R Elecraft
• [Elecraft] K2 - Win-Test LUA scripts. Anyone?   Andreas Hofmann
• [Elecraft] K3XREF Question   Chuck Smallhouse
  • [Elecraft] K3XREF Question   hawley, charles j jr
• [Elecraft] DIGOUT1   Richard Thorpe
• [Elecraft] XG50 warmup after initial run   Mooneer Salem
  • [Elecraft] XG50 warmup after initial run   Fred Smith
    • [Elecraft] XG50 warmup after initial run   hawley, charles j jr
  • [Elecraft] XG50 warmup after initial run   Paul Saffren N6HZ
    • [Elecraft] XG50 warmup after initial run   Mooneer Salem
      • [Elecraft] XG50 warmup after initial run   Don Wilhelm
      • [Elecraft] XG50 warmup after initial run   Mooneer Salem
• [Elecraft] K3XREF Question   Edward R Cole
• [Elecraft] [ELECRAFT] XG50 or XG3 and burn-in   Dave Lankshear
  • [Elecraft] [ELECRAFT] XG50 or XG3 and burn-in   Lyle Johnson
  • [Elecraft] [ELECRAFT] XG50 or XG3 and burn-in   Paul Saffren N6HZ
• [Elecraft] WTB: K3/100 (possibly a K3/10)   Tim cook
• [Elecraft] Screw Confusion   pirey4
  • [Elecraft] Screw Confusion   Ron D'Eau Claire
• [Elecraft] Edgeport/8 - Help needed   Phil Kane
• [Elecraft] [KX3] ATU or charger first?   Gil G.
  • [Elecraft] [KX3] ATU or charger first?   Ron D'Eau Claire
• [Elecraft] [KX3] ATU or charger first?   Gil G.
• [Elecraft] Off Topic: Re AA Engineering 5Amp smart charger.   Eric Buggee
• [Elecraft] HF Antenna: was G5RV   Edward R Cole
  • [Elecraft] HF Antenna: was G5RV   Tom H Childers
• [Elecraft] (no subject)   Edward R Cole
  • [Elecraft] (no subject)   Oliver Dröse
    • [Elecraft] (no subject)   Jim Rhodes
      • [Elecraft] (no subject)   Edward R Cole
      • [Elecraft] (no subject)   Fred Smith
      • [Elecraft] (no subject)   Jim Rhodes
• [Elecraft] Pigtail for K3   Ted Edwards W3TB
  • [Elecraft] Pigtail for K3   Ian Kahn - Ham
  • [Elecraft] Pigtail for K3   Dick Dievendorff
• [Elecraft] Keying External Amps   Richard Thorpe
  • [Elecraft] Keying External Amps   Greg
  • [Elecraft] Keying External Amps   Graham Kimbell G3TCT
• [Elecraft] KX3 on 600 meters ?   riese-k3djc at juno.com
• [Elecraft] usb to serial adapter k3 problem   K6ST Barry Bettman
  • [Elecraft] usb to serial adapter k3 problem   Richard Fjeld
  • [Elecraft] usb to serial adapter k3 problem   Ingo Meyer, DK3RED
• [Elecraft] OT; A question   Richard Fjeld
  • [Elecraft] OT; A question about a track for a utility pole.   Richard Fjeld
    • [Elecraft] OT; A question about a track for a utility pole.   Ken G Kopp
• [Elecraft] WTB: K3/100 or K3/10 .....Found One!!!   Tim cook
• [Elecraft] Portable speaker for KX3   Rick Robinson
  • [Elecraft] Portable speaker for KX3   Fred Smith
    • [Elecraft] Portable speaker for KX3   Ariel Jacala
• [Elecraft] Keying External Amps   Richard Thorpe
  • [Elecraft] Keying External Amps   Joe Subich, W4TV
• [Elecraft] Macros   Jim Leder (Hotmail)
  • [Elecraft] Macros   Tom H Childers
    • [Elecraft] Macros   Jim Leder (Hotmail)
      • [Elecraft] Macros   Joe Subich, W4TV
      • [Elecraft] Macros   Tom H Childers
      • [Elecraft] Macros   Jim Leder (Hotmail)
      • [Elecraft] Macros   Jim Leder (Hotmail)
      • [Elecraft] Macros   Don Wilhelm
      • [Elecraft] Macros   Don Wilhelm
      • [Elecraft] Macros   Tom H Childers
• [Elecraft] Mast Mounted Preamp   Richard Thorpe
  • [Elecraft] Mast Mounted Preamp   Don Wilhelm
• [Elecraft] PS3SVGA   Charles Stampf
  • [Elecraft] PS3SVGA   Mike K2MK
• [Elecraft] RFTB Sunday night   Larry Makoski
• [Elecraft] K Line - Assemply Time   Brian Linn
  • [Elecraft] K Line - Assemply Time   Don Wilhelm
• [Elecraft] MC-85 Kenwood Mic to K3   Brenton Meadows
  • [Elecraft] MC-85 Kenwood Mic to K3   Don Wilhelm
  • [Elecraft] MC-85 Kenwood Mic to K3   Doug VE3VS
• [Elecraft] HRD logbook problem   Scott W2NTV
  • [Elecraft] [Elecraft_K3] HRD logbook problem   Richard Fjeld
  • [Elecraft] HRD logbook problem   amsctalx at comcast.net
• [Elecraft] Portable speaker for KX3   Rick Robinson
• [Elecraft] KPA500 Shines!   Roy Morris
  • [Elecraft] KPA500 Shines!   Bill K9YEQ
    • [Elecraft] KPA500 Shines!   Gary Gregory
      • [Elecraft] KPA500 Shines!   Bill K9YEQ
• [Elecraft] KPA500 Shines!   Robert Vargas (KP4Y)
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3   Kenneth Hale
  • [Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3   Phil Hystad
  • [Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3   Bruce McLaughlin
• [Elecraft] KPA500 vs THP HL-550FX   Fred Carvalho
  • [Elecraft] KPA500 vs THP HL-550FX   Gary Gregory
  • [Elecraft] KPA500 vs THP HL-550FX   Fred Smith
• [Elecraft] Juice MG4 speaker   Dick, WN3R
  • [Elecraft] Juice MG4 speaker   Gary Gregory
  • [Elecraft] Juice MG4 speaker   Fred Smith
  • [Elecraft] Juice MG4 speaker   Walter Underwood
• [Elecraft] MD2 Mike Stand ?   Alan Fryer
  • [Elecraft] MD2 Mike Stand ?   Don Wilhelm
• [Elecraft] Question remove me   RCMBass at aol.com
• [Elecraft] Help finding KB6G contact info   Ron Midwin
  • [Elecraft] Help finding KB6G contact info   N3XX
    • [Elecraft] Help finding KB6G contact info   Ron Midwin
  • [Elecraft] Help finding KB6G contact info   Richard S. Leary
• [Elecraft] using Virtual serial Port 64   david Moes
  • [Elecraft] using Virtual serial Port 64   david Moes
    • [Elecraft] using Virtual serial Port 64   david Moes
  • [Elecraft] using Virtual serial Port 64   Fabio IZ4AFW / NZ1W
• [Elecraft] KPA500 vs THP HL-550FX   Dyarnes
• [Elecraft] KPA500 vs THP HL-550FX   Bruce Beford
• [Elecraft] OT: DX Engineering fiberglass pole   Ken G Kopp
  • [Elecraft] OT: DX Engineering fiberglass pole   Mel Farrer
  • [Elecraft] OT: DX Engineering fiberglass pole   Gary Gregory
    • [Elecraft] OT: DX Engineering fiberglass pole   Gary Gregory
• [Elecraft] ATT level   Jorge Diez - CX6VM
• [Elecraft] P3 generates noise on 144MHz   Roger Crofts
  • [Elecraft] P3 generates noise on 144MHz   Bill K9YEQ
• [Elecraft] ATT level   Bruce Beford
• [Elecraft] [K3] Using DTFM microphones   David G4DMP
• [Elecraft] Portable speakers for KX3   Barry Middleton
• [Elecraft] [K3-KPA500] SWR jumps up with 5 second key down   VK1OO, Mike Walkington
• [Elecraft] Meteor explosion in Chelyabinsk, Russia   Paul VanOveren
  • [Elecraft] Meteor explosion in Chelyabinsk, Russia   Fred Smith
    • [Elecraft] Meteor explosion in Chelyabinsk, Russia   Gary Gregory
  • [Elecraft] Meteor explosion in Chelyabinsk, Russia   Richard Fjeld
    • [Elecraft] Meteor explosion in Chelyabinsk, Russia   Gerald Manthey
• [Elecraft] KX3 in the ARRL International DX contest   Jim Sheldon
  • [Elecraft] KX3 in the ARRL International DX contest   Paul VanOveren
• [Elecraft] K1 IS FANTASTIC !!!!!!   gosier at twcny.rr.com
• [Elecraft] P3/SVGA used as "modem" for DxLab WWW or other apps   ik1bxn
  • [Elecraft] P3/SVGA used as "modem" for DxLab WWW or other apps   Joe Subich, W4TV
  • [Elecraft] P3/SVGA used as "modem" for DxLab WWW or other apps   Don Wilhelm
    • [Elecraft] P3/SVGA used as "modem" for DxLab WWW or other apps   ik1bxn
• [Elecraft] using Virtual serial Port 64   david Moes
  • [Elecraft] using Virtual serial Port 64   Joe Subich, W4TV
• [Elecraft] KPA-500 AM Performance?   Dave Purola
  • [Elecraft] KPA-500 AM Performance?   Tim Hague
    • [Elecraft] KPA-500 AM Performance?   Chuck - AE4CW
      • [Elecraft] KPA-500 AM Performance?   Don Wilhelm
• [Elecraft] K1 IS FANTASTIC !!!!!!   Mike Morrow
• [Elecraft] RF Concepts Alpha 8410 Users?   John Lawrence
  • [Elecraft] RF Concepts Alpha 8410 Users?   Robert Sands
• [Elecraft] [K3] Sudden Hi-SWR on low end of 40M   Terry Schieler
  • [Elecraft] [K3] Sudden Hi-SWR on low end of 40M   Rick Bates
  • [Elecraft] [K3] Sudden Hi-SWR on low end of 40M   Don Wilhelm
  • [Elecraft] [K3] Sudden Hi-SWR on low end of 40M   Augie Hansen
    • [Elecraft] [K3] Sudden Hi-SWR on low end of 40M   Augie (Gus) Hansen
• [Elecraft] Enhancement Request ...   Joe Subich, W4TV
  • [Elecraft] Enhancement Request ...   iain macdonnell - N6ML
• [Elecraft] P3 generates noise on 144MHz   Dave New, N8SBE
  • [Elecraft] P3 generates noise on 144MHz   hawley, charles j jr
• [Elecraft] K3 -- External speaker recommendation   W2NED
• [Elecraft] FS: LDG AT-1000 ProII   AC6JA at aol.com
• [Elecraft] K3 P3 Spurious signals   Fred Jensen
  • [Elecraft] K3 P3 Spurious signals   Peter Lambert
    • [Elecraft] K3 P3 Spurious signals   Ian White
      • [Elecraft] K3 P3 Spurious signals   Dave Van Wallaghen
      • [Elecraft] K3 P3 Spurious signals   Dave Van Wallaghen
• [Elecraft] P3 generates noise on 144MHz   Dave New, N8SBE
• [Elecraft] Bridging L-R of stereo Line Out for single channel diversity RTTY   conwell at aracnet.com
  • [Elecraft] Bridging L-R of stereo Line Out for single channel diversity RTTY   Jack Smith
    • [Elecraft] Bridging L-R of stereo Line Out for single channel diversity RTTY   Gary Hinson
• [Elecraft] (no subject)   John Veach
• [Elecraft] KX3 Upgrades   Richard Thorpe
  • [Elecraft] KX3 Upgrades   Bob
    • [Elecraft] KX3 Upgrades   Jim Wiley
      • [Elecraft] KX3 Upgrades   Gary Gregory
      • [Elecraft] KX3 Upgrades   Eric Swartz - WA6HHQ, Elecraft
      • [Elecraft] KX3 Upgrades   Fred Townsend
      • [Elecraft] KX3 Upgrades   Jim Lowman
  • [Elecraft] KX3 ATU goes off/on during send?   gt-i at gmx.net
    • [Elecraft] KX3 ATU goes off/on during send?   NZ9E
      • [Elecraft] KX3 ATU goes off/on during send?   NZ9E
      • [Elecraft] KX3 ATU goes off/on during send?   gt-i at gmx.net
• [Elecraft] How to program the K3 PF buttons to control a KRC2?   Craig - AE6RR
  • [Elecraft] How to program the K3 PF buttons to control a KRC2?   Don Wilhelm
    • [Elecraft] How to program the K3 PF buttons to control a KRC2?   Jack Brindle
      • [Elecraft] How to program the K3 PF buttons to control a KRC2?   Craig - AE6RR
      • [Elecraft] How to program the K3 PF buttons to control a KRC2?   D Joyce
• [Elecraft] ATT level on K3   Bill K9YEQ
• [Elecraft] Adapter to use KXUSB with the KPA500   peterc281
  • [Elecraft] Adapter to use KXUSB with the KPA500   Gary Hinson
  • [Elecraft] Adapter to use KXUSB with the KPA500   peterc281
  • [Elecraft] Adapter to use KXUSB with the KPA500   briana
    • [Elecraft] Adapter to use KXUSB with the KPA500   iain macdonnell - N6ML
• [Elecraft] A different kind of RS-232 adapter...   Roy Koeppe
• [Elecraft] K2 FS   gdaught6 at stanford.edu
• [Elecraft] What does the frequency readout mean?   Pete Smith N4ZR
  • [Elecraft] What does the frequency readout mean?   Don Wilhelm
  • [Elecraft] What does the frequency readout mean?   Ron D'Eau Claire
    • [Elecraft] What does the frequency readout mean?   Richard Fjeld
      • [Elecraft] What does the frequency readout mean?   Gary Gregory
      • [Elecraft] What does the frequency readout mean?   Pete Smith N4ZR
      • [Elecraft] What does the frequency readout mean?   Don Wilhelm
• [Elecraft] P3 issues   ED
• [Elecraft] KX3 in the ARRL International DX contest   K3WWP
  • [Elecraft] KX3 in the ARRL International DX contest   Jim Brown
• [Elecraft] P3 issues   ED
• [Elecraft] KX3 in the ARRL International DX contest   Jimk8mr at aol.com
• [Elecraft] What does the frequency readout mean?   Richard Ferch
  • [Elecraft] What does the frequency readout mean?   Al Lorona
  • [Elecraft] What does the frequency readout mean?   Pete Smith N4ZR
    • [Elecraft] What does the frequency readout mean?   W2RU - Bud Hippisley
      • [Elecraft] What does the frequency readout mean?   Bill W4ZV
• [Elecraft] Bob C.   Bob C.
• [Elecraft] What does the frequency readout mean?   n5ib at juno.com
• [Elecraft] KPA500 fault at H44KW (no pwr high SWR)   Neil G0JHC
  • [Elecraft] KPA500 fault at H44KW (no pwr high SWR)   David Shoaf
    • [Elecraft] KPA500 fault at H44KW (no pwr high SWR)   Robert Friess
  • [Elecraft] KPA500 fault at H44KW (no pwr high SWR)   droese at necg.de
• [Elecraft] Heil HC6 audiosettings   Laurens Sierdsma
• [Elecraft] VOX on the K3   K5HM
  • [Elecraft] VOX on the K3   Hank Garretson
  • [Elecraft] VOX on the K3   Nate Bargmann
  • [Elecraft] VOX on the K3   Jim Brown
    • [Elecraft] VOX on the K3   Todd - k1tm
      • [Elecraft] VOX on the K3   K5HM
• [Elecraft] KX3 in the ARRL International DX contest   Jim Brown
• [Elecraft] K2 RF probe   Christophe F8ACF-56
  • [Elecraft] K2 RF probe   Don Wilhelm
    • [Elecraft] K2 RF probe   Christophe F8ACF-56
• [Elecraft] WTB: P3   NZ8J
• [Elecraft] K3 A couple of buttons do not work - solved   Lothar Sack
  • [Elecraft] K3 A couple of buttons do not work - solved   Dave Hachadorian
• [Elecraft] k3 + MH2 handMic + Microkeyer II interface + THP HL 1.5KFX   Ricardo PY2PT
• [Elecraft] K3; maybe K2, soundcard manager for digital modes.   Richard Fjeld
• [Elecraft] Fw: K3; maybe K2, soundcard manager for digital modes.   Richard Fjeld
• [Elecraft] k3 + MH2 handMic + Microkeyer II interface + THP HL 1.5KFX   Ricardo PY2PT
• [Elecraft] *FOR SALE* Elecraft AF1 w/ W8FGU enclosure   John Shadle
• [Elecraft] ATT: Howard   Syl Heumann
• [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Wright, Robert
  • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Eric Swartz - WA6HHQ, Elecraft
    • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Wright, Robert
      • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Richard Fjeld
      • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Lyle Johnson
      • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Wright, Robert
      • [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Jim Brown
• [Elecraft] Kansas Snowstorm   Jim Sheldon
  • [Elecraft] Kansas Snowstorm   Matthew Zilmer
  • [Elecraft] Kansas Snowstorm   Jack Trampler
• [Elecraft] [KAT500] 10m Spur   K1GQ
  • [Elecraft] [KAT500] 10m Spur   Rick Bates
    • [Elecraft] [KAT500] 10m Spur   K1GQ
  • [Elecraft] [KAT500] 10m Spur   Charles Johnson
    • [Elecraft] [KAT500] 10m Spur   Greg
      • [Elecraft] [KAT500] 10m Spur   K1GQ
      • [Elecraft] [KAT500] 10m Spur   Rick Bates
  • [Elecraft] [KAT500] 10m Spur   John_N1JM
    • [Elecraft] [KAT500] 10m Spur   Tom H Childers
  • [Elecraft] [KAT500] 10m Spur   Bill Hammond
    • [Elecraft] [KAT500] 10m Spur   Fred Jensen
• [Elecraft] [K3] VOX on the K3 - Smooth Voice Controller   Wright, Robert
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [Elecraft] XV144 help please   kd7yz at denstarfarm.us
  • [Elecraft] XV144 help please   K7MDL
  • [Elecraft] XV144 help please   Dale Boresz
  • [Elecraft] XV144 help please   Don Wilhelm
• [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   paul ecker
  • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Fred Smith
  • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Dale Boresz
    • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Mike K2MK
  • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Wes Stewart
    • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Fred Smith
    • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Joe Subich, W4TV
  • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Matt Zilmer
    • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   ab2tc
      • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Dale Boresz
      • [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   Joe Subich, W4TV
• [Elecraft] OT - Way off topic Acom2000a   Ron W3ZV
  • [Elecraft] OT - Way off topic Acom2000a   W5RDW
  • [Elecraft] OT - Way off topic Acom2000a   Tom H Childers
• [Elecraft] KAT500 for remote operation   Greg Felter
  • [Elecraft] KAT500 for remote operation   Ron D'Eau Claire
    • [Elecraft] KAT500 for remote operation   iain macdonnell - N6ML
      • [Elecraft] KAT500 for remote operation   Ron D'Eau Claire
• [Elecraft] Fw: [Elecraft_K3] Re: OT; A question   Richard Fjeld
• [Elecraft] K3; soundcard manager for digital modes. Update   Richard Fjeld
• [Elecraft] OT 8873   f9oj.7
  • [Elecraft] OT 8873   Tom H Childers
• [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   John K3TN
  • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   hawley, charles j jr
    • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   K9IR
  • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   Ron D'Eau Claire
    • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   hawley, charles j jr
      • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   Ron D'Eau Claire
      • [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3 Subrx Turned on During Xmit?   hawley, charles j jr
• [Elecraft] K2,K3,KX3 IF-QRG for XVerter for 630m Band   Hans H Vollmer
• [Elecraft] Enabling VOX via a macro   Stephen Prior
  • [Elecraft] Enabling VOX via a macro   John_N1JM
    • [Elecraft] Enabling VOX via a macro   Stephen Prior
• [Elecraft] K3, KPA500 - PIN Diode Failure in KPA When K3   PTA_ABD
• [Elecraft] K2,K3,KX3 IF-QRG for XVerter for 630m Band   Edward R Cole
• [Elecraft] XV144 transmits 5kHz low   kd7yz at denstarfarm.us
  • [Elecraft] XV144 transmits 5kHz low   Don Wilhelm
    • [Elecraft] XV144 transmits 5kHz low   John Lemay
      • [Elecraft] XV144 transmits 5kHz low   kd7yz at denstarfarm.us
      • [Elecraft] XV144 transmits 5kHz low   John Lemay
  • [Elecraft] XV144 transmits 5kHz low   David G4DMP
• [Elecraft] KAT500 fine tune question   KD8NNU
  • [Elecraft] KAT500 fine tune question   Ron D'Eau Claire
• [Elecraft] K3 S-Meter   Laurent F6DEX
• [Elecraft] [K2] NaP3   ac2fa at yahoo.com
• [Elecraft] FS: KX3-F loaded, mint   Andrew Moore
  • [Elecraft] FS: KX3-F loaded, mint   Andrew Moore
• [Elecraft] OT *For Sale* K3/P3   Larry J on his Dell LT
• [Elecraft] ERR 12V   James C. Hall, MD
  • [Elecraft] ERR 12V   Ron D'Eau Claire
• [Elecraft] voice transmit gain   Ricardo - PY2PT
  • [Elecraft] voice transmit gain   Dale Boresz
  • [Elecraft] voice transmit gain   Mike Reublin
    • [Elecraft] voice transmit gain   Ricardo PY2PT
      • [Elecraft] voice transmit gain   Mike Reublin
      • [Elecraft] voice transmit gain   Don Wilhelm
• [Elecraft] Software   Mike Reublin
• [Elecraft] ERR 12V   James C. Hall, MD
• [Elecraft] MH2 Mic and MKII interface   Ricardo PY2PT
  • [Elecraft] MH2 Mic and MKII interface   Joe Subich, W4TV
    • [Elecraft] MH2 Mic and MKII interface   Ricardo PY2PT
      • [Elecraft] MH2 Mic and MKII interface   Joe Subich, W4TV
• [Elecraft] ERR 12V   Ralph Parker
• [Elecraft] Elecraft CW Net Report for February 10th, 11th & 18th, 2013   kevinr
  • [Elecraft] Elecraft CW Net Report for February 10th, 11th & 18th, 2013   Jim Lowman
    • [Elecraft] Elecraft CW Net Report for February 10th, 11th & 18th, 2013   kevinr
      • [Elecraft] Elecraft CW Net Report for February 10th, 11th & 18th, 2013   n5xl
• [Elecraft] Elecraft CW Net Announcement   kevinr
• [Elecraft] K3-KPA500: simplex comms   Franki ON5ZO
• [Elecraft] K3 - Loose Mic Connector Flange   Joel Black
  • [Elecraft] K3 - Loose Mic Connector Flange   Ron D'Eau Claire
  • [Elecraft] K3 - Loose Mic Connector Flange   Don Wilhelm
  • [Elecraft] K3 - (Solved) Loose Mic Connector Flange   Joel Black
• [Elecraft] K1 VFO frequency does not change   W8DE
  • [Elecraft] K1 VFO frequency does not change   Mike WA8BXN
    • [Elecraft] K1 VFO frequency does not change   John Reed, W8DE
  • [Elecraft] K1 VFO frequency does not change   Don Wilhelm
    • [Elecraft] K1 VFO frequency does not change   John Reed, W8DE
      • [Elecraft] K1 VFO frequency does not change   Mike WA8BXN
      • [Elecraft] K1 VFO frequency does not change   John Reed, W8DE
      • [Elecraft] K1 VFO frequency does not change   Don Wilhelm
      • [Elecraft] K1 VFO frequency does not change   John Reed, W8DE
      • [Elecraft] K1 VFO frequency does not change   Don Wilhelm
      • [Elecraft] K1 VFO frequency does not change   Don Wilhelm
• [Elecraft] New K3, audio (speakers) dead   VE3RX
  • [Elecraft] New K3, audio (speakers) dead   John Sweeney
  • [Elecraft] New K3, audio (speakers) dead   Eric Swartz WA6HHQ - Elecraft
  • [Elecraft] New K3, audio (speakers) dead   VE3RX
• [Elecraft] Elecraft SSB net announcement   Phil Shepard
• [Elecraft] K3: SP 2 switches back to SP 1 during RX in Split   Richard
• [Elecraft] P3SVGA or LP-PAN / NaP3 (K3)   paul ecker
• [Elecraft] KPA500 AC Power   Bill Wiehe
  • [Elecraft] KPA500 AC Power   Don Wilhelm
• [Elecraft] KAT500 Beta firmware version 1.32 now available   Dick Dievendorff
• [Elecraft] KX3: Feedback MCU 1.36 / DSP 1.05   paul hippenmeyer
  • [Elecraft] KX3: Feedback MCU 1.36 / DSP 1.05   Jim Sheldon
• [Elecraft] KPA500 AC Power   Bill Wiehe
• [Elecraft] FS - Mint Elecraft KX3   Jeff Kelly
  • [Elecraft] FS - Mint Elecraft KX3   Jeff Kelly
  • [Elecraft] FS - Mint Elecraft KX3   jkelly
• [Elecraft] please freq for elecraft ssb net?   Reginald J Mackey SR
  • [Elecraft] please freq for elecraft ssb net?   Ian Kahn
• [Elecraft] Bencher paddle and KX3   w0ih
  • [Elecraft] Bencher paddle and KX3   Peter Eijlander (PA0PJE)
• [Elecraft] Acom 1000 FS replaced with a KPA500   Howard Sherer
• [Elecraft] FS Bencher Paddle   W2bpi1 at aol.com
• [Elecraft] K3: SP 2 switches back to SP 1 during RX in Split   Tom Boucher
  • [Elecraft] K3: SP 2 switches back to SP 1 during RX in Split   Gary Hinson
• [Elecraft] KPA500 Failure to turn ON   wb6rse1 at mac.com
  • [Elecraft] KPA500 Failure to turn ON   iain macdonnell - N6ML
• [Elecraft] [Kat500ft] KAT500 Beta firmware version 1.32 now available   Bill K9YEQ
• [Elecraft] Raleigh, NC hamfest   Don Wilhelm
• [Elecraft] Elecraft PCB Diagrams   Mike Morrow
  • [Elecraft] Elecraft PCB Diagrams   Bill Clarke
  • [Elecraft] Elecraft PCB Diagrams   Bill Coleman
• [Elecraft] XG50 frequency stability   Mike
  • [Elecraft] XG50 frequency stability   David Ferrington, M0XDF
• [Elecraft] Steel in some K-line enclosures   Jim Miller
  • [Elecraft] Steel in some K-line enclosures   David G4DMP
  • [Elecraft] Steel in some K-line enclosures   Mike K2MK
    • [Elecraft] Steel in some K-line enclosures   Lewis Phelps
• [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Giancarlo Moda
• [Elecraft] K2 low power out on 20 meters   Wiley Kling
  • [Elecraft] K2 low power out on 20 meters   Don Wilhelm
• [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Chris Kimball
  • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Chris Kimball
    • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Andreas Hofmann
    • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   sam sammit
      • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Don Wilhelm
      • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Chuck Teague
      • [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Chris Kimball
• [Elecraft] F/S 73CNC K3 Weighted Knobs   Craig Smith
• [Elecraft] K3   Roger D Johnson
  • [Elecraft] K3   Wayne Burdick
• [Elecraft] Love the KX3   Paul Enz
• [Elecraft] KPA500 refused to turn on using the front panel ON button   Lawrence Allison
• [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Giancarlo Moda
  • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Joe Subich, W4TV
    • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Arie Kleingeld PA3A
• [Elecraft] FS: KDSP2, KSB2, KIO2 Modules for K2   Jim Stephens
• [Elecraft] (fwd) Re: KPA500 AC Power   AG0N-3055
• [Elecraft] KX3 Owner's Manual Errata update, rev B4-4   Wayne Burdick
  • [Elecraft] KX3 Owner's Manual Errata update, rev B4-4   geoff allsup
    • [Elecraft] KX3 Owner's Manual Errata update, rev B4-4   Don Wilhelm
      • [Elecraft] KX3 Owner's Manual Errata update, rev B4-4   geoff allsup
• [Elecraft] V6 SoftRock Lite - 40M   walter renner
• [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   David Dietrich
  • [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   Don Wilhelm
    • [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   David Dietrich
      • [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   Vic K2VCO
      • [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   David Dietrich
      • [Elecraft] K2/10 I Idiom Press CMOS4 Keyer Conflict   Don Wilhelm
• [Elecraft] K3 - N1MM/MMTTY/FSK/CW Interface/Procedure for Quick Mode Switching with a Serial Port   bills stuff
  • [Elecraft] K3 - N1MM/MMTTY/FSK/CW Interface/Procedure for Quick Mode Switching with a Serial Port   Joe Subich, W4TV
• [Elecraft] Regarding circuit board prints   Ken G Kopp
  • [Elecraft] WTB: KPA500   Scott Manthe
• [Elecraft] RESOLVED!!! K2/10 I Idiom Press CMOS4 Keyer Conflict   David Dietrich
• [Elecraft] Watch the ions   kevinr
  • [Elecraft] Watch the ions   Dave, W8OV
    • [Elecraft] Watch the ions   Bob
      • [Elecraft] Watch the ions   David Ferrington, M0XDF
      • [Elecraft] Watch the ions   Peter Eijlander (PA0PJE)
      • [Elecraft] Watch the ions   Kevin Cozens
      • [Elecraft] Watch the ions   Ron D'Eau Claire
      • [Elecraft] Watch the ions   David Ferrington, M0XDF
      • [Elecraft] Watch the ions   Ron D'Eau Claire
      • [Elecraft] Watch the ions   David Ferrington, M0XDF
      • [Elecraft] Watch the ions   Matthew Zilmer
      • [Elecraft] Watch the ions   Eric Swartz - WA6HHQ, Elecraft
• [Elecraft] XV144 drops power if "PWR" is moved during xmit in USB mode   KD7YZ Bob
  • [Elecraft] XV144 drops power if "PWR" is moved during xmit in USB mode   Dale Boresz
    • [Elecraft] XV144 drops power if "PWR" is moved during xmit in USB mode   KD7YZ Bob
      • [Elecraft] XV144 drops power if "PWR" is moved during xmit inUSB mode   John Lemay
      • [Elecraft] XV144 drops power if "PWR" is moved during xmit inUSB mode   KD7YZ Bob
• [Elecraft] K3   Jerry.Van
• [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Giancarlo Moda
  • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Joe Subich, W4TV
    • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Mike Reublin
• [Elecraft] K3/0 power   Chris Tate - N6WM
  • [Elecraft] K3/0 power   iain macdonnell - N6ML
    • [Elecraft] K3/0 power   Mike WA8BXN
      • [Elecraft] K3/0 power   iain macdonnell - N6ML
      • [Elecraft] K3/0 power   Josh Fiden
      • [Elecraft] K3/0 power   Dale Putnam
      • [Elecraft] K3/0 power   Rick Bates
      • [Elecraft] K3/0 power   Brian Alsop
  • [Elecraft] K3/0 power   Don Wilhelm
  • [Elecraft] K3/0 power   Ray Sills
    • [Elecraft] K3/0 power   iain macdonnell - N6ML
      • [Elecraft] K3/0 power   Josh Fiden
      • [Elecraft] K3/0 power   Bill Frantz
  • [Elecraft] K3/0 power   David Windisch
    • [Elecraft] K3/0 power   Chris Tate - N6WM
• [Elecraft] K3 - N1MM/MMTTY/FSK/CW Interface/Procedure for   Mike Greenway
• [Elecraft] W3PFR/N0SS audio output board for K2 STILL wanted   Dave Lankshear
• [Elecraft] Ten Tec 418   W9TTW Tabb Adams
• [Elecraft] Vox Settings   K5HM
  • [Elecraft] Vox Settings   Jay
• [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Giancarlo Moda
  • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   MontyS
  • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   MontyS
  • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Mark Stennett
    • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Giancarlo Moda
    • [Elecraft] A Modified K3 in the 2013 ARRL DX Contest   Sverre Holm (LA3ZA)
• [Elecraft] K3/0 power   Edward R Cole
  • [Elecraft] K3/0 power   Dale Putnam
• [Elecraft] K2 - Fixed AF Output PCB mod   David G4DMP
• [Elecraft] Elecraft K3-100 Repair   Brian North
  • [Elecraft] Elecraft K3-100 Repair   Tim Hague
  • [Elecraft] Elecraft K3-100 Repair   Dominic Baines
• [Elecraft] [XV432} LO Instability Problem   GuyG0UKN
• [Elecraft] K3 'REPEAT' display when using SUB rx   Rich - K1HTV
  • [Elecraft] K3 'REPEAT' display when using SUB rx   Gary Hinson
• [Elecraft] P3 - spikes that never move   Bill Clarke
  • [Elecraft] P3 - spikes that never move   John Lemay
  • [Elecraft] P3 - spikes that never move   Dave Van Wallaghen
• [Elecraft] AC Adapter Power Supply For KX3   Bob Schumacher
  • [Elecraft] AC Adapter Power Supply For KX3   Mike Cox
    • [Elecraft] AC Adapter Power Supply For KX3   hawley, charles j jr
      • [Elecraft] AC Adapter Power Supply For KX3   Brian Moran
      • [Elecraft] AC Adapter Power Supply For KX3   Mark
      • [Elecraft] AC Adapter Power Supply For KX3   K7JLTextra
  • [Elecraft] AC Adapter Power Supply For KX3   Fred Smith
  • [Elecraft] AC Adapter Power Supply For KX3   Don Wilhelm
• [Elecraft] K2 Encoder Question on 7415 build   Glenn Haffly
  • [Elecraft] K2 Encoder Question on 7415 build   Don Wilhelm
  • [Elecraft] K2 Encoder Question on 7415 build   Christophe F8ACF-56
  • [Elecraft] K2 Encoder Question on 7415 build   N4KTR
• [Elecraft] [KX3] KXFL Calibration   John Griswold
  • [Elecraft] [KX3] KXFL Calibration   Don Wilhelm
    • [Elecraft] [KX3] KXFL Calibration   John Griswold
  • [Elecraft] [KX3] KXFL Calibration   Fred Smith
• [Elecraft] AC Adapter Power Supply For KX3   Dave KK7SS
• [Elecraft] P3 - spikes that never move   Howard Hoyt
  • [Elecraft] P3 - spikes that never move   Bill Clarke
    • [Elecraft] P3 - spikes that never move   hawley, charles j jr
      • [Elecraft] P3 - spikes that never move   Bob
      • [Elecraft] P3 - spikes that never move   Joe Subich, W4TV
      • [Elecraft] P3 - spikes that never move   Bill Clarke
      • [Elecraft] P3 - spikes that never move   Johnny Siu
    • [Elecraft] P3 - spikes that never move   Ken G Kopp
      • [Elecraft] P3 - spikes that never move   Bill Clarke
      • [Elecraft] P3 - spikes that never move   Johnny Siu
      • [Elecraft] P3 - spikes that never move   John_N1JM
      • [Elecraft] P3 - spikes that never move   Ron D'Eau Claire
      • [Elecraft] P3 - spikes that never move   N2TK, Tony
      • [Elecraft] P3 - spikes that never move   Bill Clarke
      • [Elecraft] P3 - spikes that never move   Bill Clarke
      • [Elecraft] P3 - spikes that never move   hawley, charles j jr
      • [Elecraft] P3 - spikes that never move   Vic K2VCO
      • [Elecraft] P3 - spikes that never move   Bill Clarke
• [Elecraft] K3 + MicrokeyerII + Tokyo HI Power 1.5kfx   Ricardo - PY2PT
  • [Elecraft] K3 + MicrokeyerII + Tokyo HI Power 1.5kfx   F8EZE
  • [Elecraft] K3 + MicrokeyerII + Tokyo HI Power 1.5kfx   Joe Subich, W4TV
• [Elecraft] SVGA BOARD FOR THE P3   Paul VanOveren
  • [Elecraft] SVGA BOARD FOR THE P3   Mike K2MK
    • [Elecraft] SVGA BOARD FOR THE P3   Jim McDonald
      • [Elecraft] SVGA BOARD FOR THE P3   Paul Saffren N6HZ
      • [Elecraft] SVGA BOARD FOR THE P3   Ron D'Eau Claire
• [Elecraft] KX1 Build Woes   Mikey - WB8ICN
  • [Elecraft] KX1 Build Woes   Don Wilhelm
    • [Elecraft] KX1 Build Woes   hawley, charles j jr
• [Elecraft] K3 Manual Error? Software error?   Lewis Phelps
  • [Elecraft] K3 Manual Error? Software error?   Jay
  • [Elecraft] K3 Manual Error? Software error?   KD8NNU
  • [Elecraft] K3 Manual Error? Software error?   Don Wilhelm
• [Elecraft] RFI showing up on the P3   Mike Weir
• [Elecraft] P3/SVGA Firmware 1.25/1.16 now available as a general release   Paul Saffren N6HZ
  • [Elecraft] Diagnostic commands accidentally left in P3 version 1.25   Paul Saffren N6HZ
• [Elecraft] P3/SVGA Firmware 1.25/1.16 now available as a general release   Paul Saffren N6HZ
• [Elecraft] KX3 PF1/PF2 Switch Customization via "Macros"   wayne burdick
• [Elecraft] KAT-500 Antenna Tuner question   rlvz at aol.com
  • [Elecraft] KAT-500 Antenna Tuner question   Don Wilhelm
    • [Elecraft] KAT-500 Antenna Tuner question   Rick Dettinger
      • [Elecraft] KX(2)   KENT TRIMBLE
      • [Elecraft] KX(2)   Wayne Burdick
  • [Elecraft] KAT-500 Antenna Tuner question   Carl Clawson
  • [Elecraft] KAT-500 Antenna Tuner question   Phil & Debbie Salas
    • [Elecraft] KAT-500 Antenna Tuner question   John_N1JM
      • [Elecraft] KAT-500 Antenna Tuner question   Ron D'Eau Claire
• [Elecraft] V63ZM & KH2/G3ZEM   Bob Henderson
  • [Elecraft] V63ZM & KH2/G3ZEM   Jim Brown
• [Elecraft] Newest P3 FW Upgrade   Joel Black
  • [Elecraft] Newest P3 FW Upgrade   Joel Black
    • [Elecraft] Newest P3 FW Upgrade   John_N1JM
  • [Elecraft] Newest P3 FW Upgrade   David Fleming
• [Elecraft] spikes that never move   Mike Greenway
  • [Elecraft] spikes that never move   Tim Hague
• [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Jon Zaimes AA1K
  • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Don Wilhelm
    • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Nate Bargmann
      • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Don Wilhelm
      • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   GDanner
      • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Nate Bargmann
      • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Nate Bargmann
  • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Rick Robinson
    • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Don Wilhelm
      • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Rick Robinson
• [Elecraft] Elecraft KX2   edward kacura
  • [Elecraft] Elecraft KX2   Brian Mury
• [Elecraft] [P3] and SVGA question   Harlan
  • [Elecraft] [P3] and SVGA question   Paul Saffren N6HZ
• [Elecraft] P3 New Features   Mike K2MK
  • [Elecraft] P3 New Features   Stephen Prior
    • [Elecraft] P3 New Features   Jim Sheldon
      • [Elecraft] P3 New Features   Bill Clarke
      • [Elecraft] P3 New Features   Ian White
      • [Elecraft] P3 New Features   Dale Boresz
      • [Elecraft] P3 New Features   david Moes
    • [Elecraft] P3 New Features   David Ferrington, M0XDF
  • [Elecraft] P3 New Features   Paul Saffren N6HZ
• [Elecraft] K3 mods by I7SWX   Twan at pa0kv.nl
  • [Elecraft] K3 mods by I7SWX   Wayne Burdick
    • [Elecraft] K3 mods by I7SWX   Keith-K5ENS
• [Elecraft] K2 exciting a Palomar TX5300 PA   Hans Elfelt Bonnesen
  • [Elecraft] K2 exciting a Palomar TX5300 PA   Don Wilhelm
• [Elecraft] K3 vs. KX3 for digital modes   Stan AE7UT
  • [Elecraft] K3 vs. KX3 for digital modes   WM3M
  • [Elecraft] K3 vs. KX3 for digital modes   Bill Frantz
  • [Elecraft] K3 vs. KX3 for digital modes   Gerald Manthey
  • [Elecraft] K3 vs. KX3 for digital modes   Walter Underwood
  • [Elecraft] K3 vs. KX3 for digital modes   K7JLTextra
• [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Rick Robinson
  • [Elecraft] Questions on Yamaha CM-500 boom headset with K3   Eric Buggee
• [Elecraft] OT P3 question   Sam Morgan
  • [Elecraft] OT P3 question   Keith Heimbold
  • [Elecraft] OT P3 question   Gary K9GS
  • [Elecraft] OT P3 question   Ron D'Eau Claire

Last message date: Thu Feb 28 23:11:33 EST 2013
Archived on: Wed Jul 10 14:43:48 EDT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...