[Elecraft] [K3} NB and Sub-rx

[Matthew Zilmer]

True, that's the way I've done it.  By 'shooting my mouth off', I meant that I didn't bother to read that Tom had already tried that.  I've recommended he check his sub's NB settings while in BSET.  He might have the NB level set low or OFF, but only for the sub.

Matt Zilmer
Consultant - Product Management Dept.
Magellan Navigation / MiTAC Digital Corp.
Tel: (909) 394-6052
Cell: (909) 730-6552
In status quo voluntas non sufficit


-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike K2MK
Sent: Thursday, February 07, 2013 2:05 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] [K3} NB and Sub-rx

Hi Tom,

Matt was actually correct. Activate BSet and then tap the NB button while BSet is displayed in the upper display. The NB identifier on the display should light up. I just tried and it works perfectly on my K3. Then, while BSet is still active you can hold the NB button to choose your desired settings. This also applies in an identical manner to NR.

73,
Mike K2MK


Matthew Zilmer-2 wrote
> Sorry.  Next time I'll read the entire email before shooting my mouth off.
> 
> Matt Zilmer
> Consultant - Product Management Dept.
> Magellan Navigation / MiTAC Digital Corp.
> Tel: (909) 394-6052
> Cell: (909) 730-6552
> In status quo voluntas non sufficit
> 
> 
> -----Original Message-----
> From: 

> elecraft-bounces at .qth

>  [mailto:

> elecraft-bounces at .qth

> ] On Behalf Of Matthew Zilmer
> Sent: Thursday, February 07, 2013 1:31 PM
> To: t.izak;

> elecraft at .qth

> Subject: Re: [Elecraft] [K3} NB and Sub-rx
> 
> Try enabling the sub's NB with BSET active.
> 
> Matt Zilmer
> Consultant - Product Management Dept.
> Magellan Navigation / MiTAC Digital Corp.
> Tel: (909) 394-6052
> Cell: (909) 730-6552
> In status quo voluntas non sufficit
> 
> 
> -----Original Message-----
> From: 

> elecraft-bounces at .qth

>  [mailto:

> elecraft-bounces at .qth

> ] On Behalf Of t.izak
> Sent: Thursday, February 07, 2013 12:11 PM
> To: 

> elecraft at .qth

> Subject: [Elecraft] [K3} NB and Sub-rx
> 
> Gang,
> 
> I'm trying to get the NB to function when I press the "SUB" button 
> (sub-rx
> installed) on the K3 as I have a horrific power line noise here. The 
> K3 NB does a great job on reducing the RFI but when I press the "SUB" 
> button, I can hear the RFI noise in the headset but MAIN is ok.
> 
> I tried using "BSET" but that doesn't do anything...am I missing 
> something here?
> 
> 73
> Tom/k1tl...





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-NB-and-Sub-rx-tp7569715p7569721.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html