No subject

SSB/CW VFO Offset
The K3 can automatically offset the VFO frequency when you switch from SSB
to CW mode, so other stations will hear the correct CW pitch. See CONFIG:CW
WGHT for details.

You can transmit in CW when SSB mode is selected by just hitting the key or
paddle; there=92s no need to use cross-mode split in this case. The SSB
station will hear the signal at your sidetone pitch. See CONFIG:CW WGHT.

CW WGHT
VFO OFS

Tapping the 5 key selects automatic VFO offset when switching to CW from
any other mode. The offset is the sidetone frequency that can be adjusted
by holding the  PITCH  and tuning VFO A. VFO nor (the default) provides no
offset. This is useful if you are carrying on a conversation in SSB and
both stations wish to switch to CW.


Regards,
David McAnally
WD5M <http://wd5m.net/>


On Tue, Jun 11, 2013 at 1:06 PM, Richard <hb9anm at bluewin.ch> wrote:

> A fellow ham has a problem withhis K3, which works flawlwssly in SSB but
> as soon as he switches to CW, the TX-frequency jumps up by 3 kHz and stay=
s
> there.
> No RIT/XIT engaged. He was able to check with another ham and the TX was
> actually 3 kHz higher than the RX.
>
> This is absolutely new to me... Anyone had this kind of issue?
>
> Thanks and vy 73
>
> Richard -- HB9ANM
> ______________________________**______________________________**__
> Elecraft mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.q=
th.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm=
>
> Post: mailto:Elecraft at mailman.qth.**net <Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>