[Elecraft] K1 VFO frequency does not change

[Mike WA8BXN]

A missing or not properly soldered C2 would do it. 
 
73 - Mike WA8BXN 
 
 
 
 
 
-------Original Message------- 
 
From: W8DE 
Date: 2/23/2013 9:43:56 PM 
To: elecraft at mailman.qth.net 
Subject: [Elecraft] K1 VFO frequency does not change 
 
I'm at the VFO range test in building of my K1. I go into the CAL menu, 
Display OSC and see a freq of 3.121 MHz. The frequency does not change when 
I turn the VFO tuning pot. 
 
I checked the voltage on the VFO POT signal and it goes between 0v and 
5.935v. The voltage on D3 goes between 0v and 5.888v. 
 
Any suggestions on where I should look to determine why I cannot change VFO 
Frequency ? 
 
73, 
John W8DE