[Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3

[Phil Hystad]

Are you trying to hook everything up at once for the first time?

If so, I would suggest first getting the KPA500 to work with the K3 without using the KAT500 and once you have done that configure in the KAT500.

I followed the configuration descriptions in hooking up my K-line but I don't remember having to change any configurations (menu stuff) to support the KPA500 or the KAT500.  But then, maybe I have forgotten.

73, phil, K7PEH


On Feb 16, 2013, at 9:17 PM, Kenneth Hale <kenhale at earthlink.net> wrote:

> Received my new KOA500 AND KAT500 but have not been able to get either one
> to respond to the K3.  The K3 was working great as a barefoot radio.  Have
> tried to connect the system in about 5 different configurations as shown in
> the manuals that came with the amp and tuner. No response from the tuner or
> amp.  Could some menu setting in the K3 be stopping the use of the KPA 500
> and KAT500?  Very confused at this point. 
> 
> 
> 
> 
> 
> 
> 
> Ken Hale KE5KNF
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html