[Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3

[Bruce McLaughlin]

Could you be more specific as to what is and is not working?  I have a k3
and a KPA 500 but not a KAT 500.  The amplifier works perfectly with my K-3,
using the AUX cable.  I did have a problem at first which was entirely due
to my own stupidity.  The amplifier was factory assembled and I did not
realize that it was shipped without fuses installed.  Consequently when I
first attempted to use it, it was deader than a doornail!  After I finally
remedied that problem everything worked perfectly.  I assume your amplifier
turns on but does not do anything when attached to the k3 but perhaps you
could be a bit more specific about the problem.

Bruce-W8FU

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Kenneth Hale
Sent: Sunday, February 17, 2013 12:18 AM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] KPA500,KAT500 DOES NOT RESPOND TO K3
Importance: High
Sensitivity: Confidential

Received my new KOA500 AND KAT500 but have not been able to get either one
to respond to the K3.  The K3 was working great as a barefoot radio.  Have
tried to connect the system in about 5 different configurations as shown in
the manuals that came with the amp and tuner. No response from the tuner or
amp.  Could some menu setting in the K3 be stopping the use of the KPA 500
and KAT500?  Very confused at this point. 

 

 

 

Ken Hale KE5KNF

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html