[Elecraft] How to program the K3 PF buttons to control a KRC2?

[Don Wilhelm]

Craig,

What specifically do you want to do?

The KRC2 does select different outputs according to the band the K3 is 
on, so the band outputs can operate your antenna selection on the remote 
switch.  The KRC2 configurator program can assist with the "which 
band(s) selects which KRC2 output".

Why do you need additional control from the K3?  The KRC2 ACC outputs 
are only accessible from the buttons on the KRC3 itself, and are not 
accessible through AUXBUS commands as far as I know.

I do not think the PF1 nor PF2 buttons are capable of issuing any AUXBUS 
commands.  Check the K3 Programmer's Reference for the commands that can 
be executed with macros.  I see none that directly control the AUXBUS.

73,
Don W3FPR

On 2/18/2013 9:24 PM, Craig - AE6RR wrote:
> Help,
>
> I am posting this again.  Is there some way to program the PF buttons on a
> K3 to control a KRC2 connected to the AUX bus?
>
>   
>
> I would like to be able to use the PF buttons to manually select antennas on
> a remote switch and control other items at my remote location with the PF1
> and PF2 buttons.
>
>   
>
>