[Elecraft] P3 generates noise on 144 MHz

[K7MDL]

I took special care to ensure all case covers metal to metal connections were
sanded free of paint. I also did my best to route internal coax cables near
the K3 Synth unit modules in a way to prevent least problems.  I also use a
ferrite snap on cylinder with several wraps on the 12VDC P3 power cord.  

So in my shack there is no radiated noise from the P3 that I can find. 
There are other noise sources, particularly my high efficiency gas furnace
controller.  Still fighting that one.



--
View this message in context: http://elecraft.365791.n2.nabble.com/P3-generates-noise-on-144-MHz-tp7569806p7569810.html
Sent from the Elecraft mailing list archive at Nabble.com.