[Elecraft] Paddle Keyer and PTT

[Greg]

You're welcome and good luck!

73
Greg


On 2/8/13, Cady, Fred <fcady at ece.montana.edu> wrote:
> Hello Bob,
> Plug your foot switch into the PPT IN jack on the back panel of the K3.
> Hold the VOX end of the Band down button until the VOX icon goes out.
> 73,
> Fred, KE7X
> "The Elecraft K3: Design, Configuration, and Operation - 2nd Edition"
> www.ke7x.com
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KD7YZ Bob
> Sent: Friday, February 08, 2013 11:52 AM
> To: K3 List
> Subject: [Elecraft] Paddle Keyer and PTT
>
> Howdy K3' people:
>
> So as not to accidently blow out a Pre-Amp at the Mast, I want my
> Vibroplex Key to "Not" key the rig.  Rather, I'd like to use a Heil
> Foot-Switch that I have.
>
> What's the setting to make the Keyer not key up the rig?
>
> Where's the connector where I plug in the foot-switch ?
>
> Thanks
>
> --
> 73
> KD7YZ Bob
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>