[Elecraft] Paddle Keyer and PTT

[Cady, Fred]

Hello Bob,
Plug your foot switch into the PPT IN jack on the back panel of the K3.
Hold the VOX end of the Band down button until the VOX icon goes out. 
73,
Fred, KE7X
"The Elecraft K3: Design, Configuration, and Operation - 2nd Edition"
www.ke7x.com
 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KD7YZ Bob
Sent: Friday, February 08, 2013 11:52 AM
To: K3 List
Subject: [Elecraft] Paddle Keyer and PTT

Howdy K3' people:

So as not to accidently blow out a Pre-Amp at the Mast, I want my
Vibroplex Key to "Not" key the rig.  Rather, I'd like to use a Heil
Foot-Switch that I have.

What's the setting to make the Keyer not key up the rig?

Where's the connector where I plug in the foot-switch ?

Thanks

--
73
KD7YZ Bob

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html