[Elecraft] Paddle Keyer and PTT

[Greg]

Bob.....BTW, I meant to say the PTT IN jack, not KEY IN.  Probably
obvious but wanted to clarify just in case.

73
Greg


On 2/8/13, Greg <ab7r at cablespeed.com> wrote:
> You're welcome and good luck!
>
> 73
> Greg
>
>
> On 2/8/13, Cady, Fred <fcady at ece.montana.edu> wrote:
>> Hello Bob,
>> Plug your foot switch into the PPT IN jack on the back panel of the K3.
>> Hold the VOX end of the Band down button until the VOX icon goes out.
>> 73,
>> Fred, KE7X
>> "The Elecraft K3: Design, Configuration, and Operation - 2nd Edition"
>> www.ke7x.com
>>
>>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KD7YZ Bob
>> Sent: Friday, February 08, 2013 11:52 AM
>> To: K3 List
>> Subject: [Elecraft] Paddle Keyer and PTT
>>
>> Howdy K3' people:
>>
>> So as not to accidently blow out a Pre-Amp at the Mast, I want my
>> Vibroplex Key to "Not" key the rig.  Rather, I'd like to use a Heil
>> Foot-Switch that I have.
>>
>> What's the setting to make the Keyer not key up the rig?
>>
>> Where's the connector where I plug in the foot-switch ?
>>
>> Thanks
>>
>> --
>> 73
>> KD7YZ Bob
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>