[Elecraft] K3 Manual Error? Software error?

[Jay]

Same thing here....sure looks like documentation error

I get a "-" showing up versus a vertical type "apostrophe" after L or H

Jay
W2IJ

----- Original Message ----- 
From: "Lewis Phelps" <lew at n6lew.us>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, February 27, 2013 2:02 PM
Subject: [Elecraft] K3 Manual Error? Software error?


I recently acquired a Kenwood MC-90 desk mic from a "for sale" list posted 
here. It's a great microphone, but with a VERY low output level.  Even with 
MIC GAIN cranked all the way up to 60, it wouldn't move the ALC indicator 
unless I literally shouted into it. (Yes, I had selected "FP-H on the mic 
setup.)

Then I found the following in the K3 Operating Manual, page 52:
For the front-panel mic only, tap [3] to turn on an additional gain stage. 
Use this only with very low-output mics. An apostrophe will appear after the 
H , e.g. H ’ .

I rushed to try that.  Result:  "N/A".

But....while fiddling around trying to find out why the [3] button wasn't 
doing what it was supposed to do, I more or less accidentally tapped the [7] 
button, and the magic apostrophe appeared after the H.  And most 
importantly, I now have enough amplification for the Kenwood mic to be 
functional.

It would seem that there are only two explanations for this:

1. The manual is wrong.
2. Bad firmware.

Anybody know which answer is correct?  I have no way to tell.

Lew N6LEW




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html