[Elecraft] Macros

[Tom H Childers]

Good catch Don.  I missed that one!

73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member

On Sat, 16 Feb 2013 17:37:55 -0500, Don Wilhelm
<w3fpr at embarqmail.com> wrote:

>Jim,
>
>Why are you re-doing the macro in a continuous loop?
>More specific, why do you have the SWH45 and SWH47 included in the macro.
>If you assign the first macro to PF1, and then initiate it with a hold 
>of PF1. it will execute the MD3, then BW0040, but when it sees the 
>SWH45, it will start all over again, and will never end.
>
>I am not certain how it could be working right now.
>
>73,
>Don W3FPR
>
>On 2/16/2013 2:12 PM, Jim Leder (Hotmail) wrote:
>> The 2 macros I use work OK since I reloaded the firmware. I tried so 
>> many different, fancy things prior to getting messed up, I'm not sure 
>> what they were now, but it was a lot. That's when I attempted to go 
>> back to what I knew was OK, but they didn't work either. That's when I 
>> got desperate and as a last resort, reloaded the 4.60 firmware.
>>
>> Here are the two ORIGINAL macros that now work once again:
>>
>> CW MD3;BW0040;SWH45;MN255;   /* PF1 hold */
>> FSK MD6;DT2;BW0050;SWH47;MN255;  /* PF2  hold */
>>
>> Seems something in the firmware got out of sorts by my screwing around 
>> with those two macros, but I don't know how.
>>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html