[Elecraft] K2/100 - "Info 080" message

Brian Lodahl OZ2BRN oz2brn at post.cybercity.dk
Wed Feb 6 10:50:37 EST 2013


Hi Tom / Don,

I had a similar intermittent problem, when dissasembling and 
re-assembling my K2 /100 #6936 during installation of the XV-60 module. 
All my efforts attempting to debug the problem were unsuccessful, and in 
the end I suspected that I had killed U1 (or some other PIC) by mistake.

Then - the INFO-080 error surprisingly went away again; as I found that 
the problem dissapeared after properly unplugging and re- securing the 
data bus cable (flat ribbon cable) between the K2 and the KPA 100 again.

Away went the problem and I haven't seen it since ... Only the next day 
after the fix,  the rig took a pounding 48-hour CQWW CQ operation, 
flawlessly.


/OZ2BRN - Brian

K2 #6936 and Kx3 # 1118



Den 06-Feb-13 15:38, Don Wilhelm skrev:
> Tom,
>
> An INFO 080 message is the result of a failure of the MCU to obtain 
> the expected response from another microprocessor in the expected time.
>
> Since it does not happen when you disconnect the KAT100, I would 
> suggest first checking the connecting cable, then the AUXBUS path in 
> the KAT100.  Try reseating the KAT100 firmware IC if you do not find a 
> cable problem, and if all else fails, replace the KAT100 firmware.
>
> 73,
> Don W3FPR
>
> On 2/6/2013 8:46 AM, Tom Warren wrote:
>>     On the heels of my XV432 'issue', and totally unrelated because 
>> the XV432 is
>> interfaced to a FlexRadio, my faithful K2/100 is showing an "Info 
>> 080" message on startup.
>> I've found that by unplugging the DB9 from my KAT100 the rig operates 
>> normally.
>>
>>    What is my next step to track down the problem ?
>>
>>
>>     All suggestions welcome ;0)
>>
>>    73
>> Tom
>> W4TMW
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the Elecraft mailing list