[Elecraft] No resopnse on config menu
Dave New, N8SBE
n8sbe at arrl.net
Tue Feb 12 14:58:42 EST 2013
Try unplugging all AUX and RS-232 cables from the back of the K3. I've
had computer programs that were accessing the K3 'hang' and then you
couldn't manipulate the menu system from the front panel, until I
unplugged the offending cable(s).
Resetting whatever external box/computer is misbehaving fixes that
particular failure mode.
Your mileage may vary.
73,
-- Dave, N8SBE
> -------- Original Message --------
> Subject: Re: [Elecraft] No resopnse on config menu
> From: Don Wilhelm <w3fpr at embarqmail.com>
> Date: Sat, January 05, 2013 10:54 am
> To: Lars Midtboe <lmidtboe at yahoo.no>
> Cc: elecraft at mailman.qth.net
>
>
> Lars,
>
> Sorry, but you did not initially indicate that it was working previously.
>
> My first guess is that your VFO B encoder has failed. You could make a
> test by removing the Front Panel and swapping the encoders between A and
> B. That step would verify that the problem is in fact the encoder.
>
> 73,
> Don W3FPR
>
> On 1/5/2013 10:39 AM, Lars Midtboe wrote:
> > Yahh but nothing happen when rotating vfo-b....i have this k3 for sverals
> > years soo i dont know what happen here??
> >
> > Any sggestions??
> > All buttons are working and i tru reset with shift/power on reloaded older
> > fw...nehhh no sesponse..
> >
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list