[Elecraft] K2 Encoder Question on 7415 build

[Christophe F8ACF-56]

Glenn and goodnight all

I'll put this link:

http://cjoint.com/?CBBvSo5XnWP

if here can help you to see a little more clearly the way I mounted here

# 7369

 
73 , Christophe F8ACF-56


________________________________
 De : Glenn Haffly <k5zeglenn at gmail.com>
À : Elecraft at mailman.qth.net 
Envoyé le : Mercredi 27 février 2013 17h01
Objet : [Elecraft] K2 Encoder Question on 7415 build
 
I have a question on the length of  the 4 wires from the encoder board to
the front panel. If they are too short the encoder is too far forward
resulting in the front panel buttons out of alignment.
Having the wires longer cures the front panel alignment but , Then the back
of the encoder board is contacting the rear of the control board. Anyone
else observed this?

Thanks , Glenn
K5ZE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html