[Elecraft] [KAT500] 10m Spur

[K1GQ]

On 2013.02.21, at 12:39, Rick Bates <happymoosephoto at gmail.com> wrote:

> Analysis: it isn't the KAT500.  The signal is coming from another external source.  

Not true in my case. The only way to completely suppress my spur is to remove 12VDC power to my KAT500 by disconnecting the power cable. Turning the KAT500 “off” isn’t enough because the internal electronics are still alive.

  Bill, K1GQ