[Elecraft] (no subject)

[Oliver Dröse]

But not as a PTT signal (that was the question). DIGOUT1 is either permanently on or off, depending on band-specific menu setting. To use it as a band-specific PTT output is not possible.

73, Olli - DH8BQA




Am 16.02.2013 um 09:30 schrieb Edward R Cole <kl7uw at acsalaska.net>:

> Richard,
> 
> Yes, DIGOUT-1 can be used on any band by enabling it in CONFIG: to "ON".
> 
> 73, Ed - KL7UW
> ---------------------------------------------------------
> Date: Thu, 14 Feb 2013 18:00:26 -0800
> From: Richard Thorpe <kissov at me.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] DIGOUT1
> Message-ID: <C76BE011-3B1A-4871-8397-EADEEC74FD53 at me.com>
> Content-Type: text/plain; charset=us-ascii
> 
> Can I use DIGOUT1 ( pin 11 ACC connector) to key an external 2 meter amp ( ground on transmit) connected to ANT 3.  When I PTT I want to key the 2 meter amp without keying the 160-10 amp connected to ANT1.  Thank you
> 
> K6CG
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html