[Elecraft] Norm1 and Norm2 how to switch between them???
Fred Jensen
k6dgw at foothill.net
Mon Feb 11 14:22:27 EST 2013
"The K3 remembers the DSP and roofing filter settings for each VFO and
for each mode except FM. These are called presets I and II and the
filter settings saved in these presets are updated each time you change
them."
Cady, Fred KE7X
"The Elecraft K3 - Design, Configuration, and Operation"
[All you ever wanted to know but were afraid to ask!]
Pg 49, "Filter Presets" [Ver. 1.0]
There is no overt SAVE function for these parameters, they are
automatically saved. You toggle between I and II by HOLDING the
HI/WIDTH knob until the I/II indicator changes. HOLDING it again will
toggle back.
To save your particular settings to a preset, set I/II [your choice] by
HOLDING the knob, and set the radio up as you wish. They're saved. If
you toggle to the other preset and do other things, the configuration
will re-appear the next time you toggle to back the first preset.
The NORM function [HOLDING the LO/SHIFT knob] will "normalize" the DSP
and roofing filter settings depending on mode. There are two NORM's,
creatively named NORM 1 and NORM 2. Choose your desired DSP BW for CW
and SSB. HOLD NORM until until <- SAV -> appears. Without releasing
the knob, rotate it counter-clockwise just a little to save the settings
to NORM 1, clockwise to save to NORM 2.
To get NORM 1 or NORM 2 back, HOLD NORM until <- NOR -> appears, and
without releasing the knob, rotate it slightly counter-clockwise [NORM
1] or clockwise [NORM 2]. When you have NORMalized the radio, two
little "wings" will appear at the ends of the DSP display slanting
downward to indicate that you're set up in one of your 2 normalized
settings. They will go away as soon as you change DSP settings.
Hope this helps the original questioner. If you don't have Fred's book,
don't wait, get it. I've never found much use for the presets and NORM,
I suspect I'm not real creative with my radio. :-)
INT QKN "How many knobs does your radio have?"
QKN 35 "My radio has 35 knobs."
INT QKK "How many of those do you know how to use?"
QKK 5 "I know how to use five of them."
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org
On 2/11/2013 9:02 AM, Tom H Childers wrote:
> I'm in a fog here this morning. I should have said:
>
> To switch between NORM and NORM/II, Push and HOLD the end of the
> KNOBS above their labels.
More information about the Elecraft
mailing list