[Elecraft] [K3 - K144XV] frequency offset???

[Oliver Dröse]

Hi Jim,

do you by chance also have the K144RFLK board installed? Then no offset is 
needed as the reference lock takes care of (no) frequency offsets.

73, Olli - DH8BQA



----- Original Message ----- 
From: "Jim Spears" <n1nk at cox.net>
To: <elecraft at mailman.qth.net>
Sent: Thursday, January 31, 2013 1:23 PM
Subject: [Elecraft] [K3 - K144XV] frequency offset???


>I just installed a K144XV in K3/100 s/n 2295, I entered the frequency
> offsets for the two segments as printed on the module.  The first time I
> tried to listen to a 2m repeater in either segment, I found the frequency 
> to
> be off.  working with Ken, K3IU, we decided to zero out the offsets and 
> the
> repeater frequency displayed on the rig allowed the repeater output to be
> sharp and clear.  Is this normal?  Has anyone else encountered this
> phenomenon?
>
>
>
> Jim/N1NK
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> E-Mail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 2013.0.2890 / Virendatenbank: 2639/6066 - Ausgabedatum: 
> 29.01.2013
>